Tender For Special Repairs To Direct Sluice No.84 Kannadian Channel In Karukurichi Village Cheranmahadevi Taluk Of Tirunelveli District.
Tender Value
7.90 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
8 days left
EMD
8000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Direct Sluice No.84 Kannadian Channel In Karukurichi Village Cheranmahadevi Taluk Of Tirunelveli District.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation and depositing on bank with initial lead of 10m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B for pen execavation. and as directed by Department officers et., complete. |
| 2 | Dismantling the existing Plain Cement Concrete in the existing bridge and clearing away from the work site and carefully stacking the useful materials for reuse on the road side as directed by the departmental officers including all labour and incidental charges etc., complete.and as directed by Department officers et., complete. |
| 3 | Dismantling clearing away and carefully stacking materials usefull materials for reuse for any thickness of walls in brick or stone masonry in cement mortar walls under 3m high etc., complete complying with standard specifications and as directed by the Engineer incharge of work.and as directed by Department officers et., complete. |
| 4 | Earth work excavation and depositing on bank with initial lead of 10m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B for Foundation) and as directed by Department officers et., complete. |
| 5 | Providing and placing in Position of Plain cement concrete 1:3:6 using hard broken stone aggregate of maximum nominal size of 40mm to IS specified grading mixing by mixer machine including dewatering the placement site,laying the concrete in layers and in bays vibrating,compacting and finishing the surface with all leads and lifts watering curing to attain the profile and strength as specified in the drawing for various depth and height below and above ground level etc complete as directed by the Engineer in charge of work complying with the standard specification and as directed by Department officers et., complete. |
| 6 | Providing and placing in Position of Plain cement concrete 1:2:4 using 60% of 40 mm and 40% of 20mm hard broken stone aggregate of maximum nominal size to IS specified grading mixing by mixer machine including dewatering the placement site,laying the concrete in layers and in bays vibrating,compacting and finishing the surface with all leads and lifts watering curing to attain the profile and strength as specified in the drawing for various depth and height below and above ground level etc complete as directed by the Engineer in charge of work complying with the standard specification and as directed by Department officers et., complete. |
| 7 | Supply of NP3 Class RCC Pipe conforming to IS 458/2003 including cost of pipe as a finished work including allother incidental charges, testing charges includingloading, unloading, transport and delivery in goodcondition at work site etc., complete, as directed by the Departmental Officers, as per standard specifications. |
| 8 | Refilling with excavated earth (other than sand) complying with the standard specification for filling in foundation and basement etc complete as directed by the Engineer in charge of work complying with the standard specification. and as directed by Department officers et., complete. |
| 9 | Earth work excavation deploying earth moving machinery for desilting channel having a width of more than 10m and forming bund on either side and depositing the earth on banks including jungle clearance etc complete. (W-0089) and as directed by Department officers et., complete. |
| 10 | Supplying and erecting water tight steel centering for sides and sofits including supports and strutting upto 3.29M height for plain surface such as RCC slab, vertical slabs, side slabs of RCC works wioth all cross bracings using mild steel B.G.10gauge sheets of size 90cm x60cmx10 gauge stiffend with welded mils dteel angels of size 25mm x25mmx3mm for boarding laid over silver oak(country wood) joists of size 10cmx6.5 spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete complying with standard specification and as directed by the Engineer incharge of work (The retrieved materials should be taken back by the contractor). The payment should be made after the concrete and as directed by Department officers et., complete. |
| 11 | Without Strutting |
| 12 | With Strutting |
| 13 | Fabrication, Supply and erection of Screw Gearing Steel Shutter of following sizes made out of 8mm thick Mild Steel plates and 65 x 65 x 6mm Mild Steel Channels for outer frame with each 1 No of vertical and horizontal stiffeners at equal spacing made out of same section and 8mm Mild Steel plate for Gusset plate 2 Nos. of size 0.30 x 0.23m with required bolts and nuts and shutter Groove Angle made out of 100 x 100 x 10mm Mild Steel angle with required height including welding of Holdfast of size 40x40x6mm Mild Steel angle 3 Nos and Screw Rod 50mm dia Mild Steel Round Rod duly machined and fully threaded to suit the Capstan Head Assembly with required bolt and nut and Top beam made out of 150x75mm (ISMB 150) duly drilled to suit the Head Set Assembly with required bed bolt made out of 25mm Mild Steel Round Rod duly threaded with suitable anchorage arrangements to a height of 0.9m with necessary Fish Plate made out of 12mm Mild Steel plate of size 0.23 x 0.30m, 2 Nos and the Cast Iron Head Set Assembly medium duty with hexagonal nut (approximate 50Kg) duly machined with nut, threading to suit the Screw rod with including cost of ball bearings for smooth operation cost of grease, one coat of Anticorrosive black paint over the one coat Red Oxide primer etc., The cost shall include required handle for shutter operation and conveying loading and unloading charges including petty civil work and trail operation etc., complete. and as directed by Department officers et., complete. SHUTTER SIZE 0.45 x 0.45 M |
| 14 | GST 18% in Figures Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender