Tender For Rectification Of Submersible Pumps With Related Allied Works At Salma Water Scheme Under Bmd, Phe, Dte.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Sep 2026
8 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bankura → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rectification Of Submersible Pumps With Related Allied Works At Salma Water Scheme Under Bmd, Phe, Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Withdrawing of defective submersible pump motor set from river bed tube well after disconnecting of all the electrical and hydraulic connections as per direction of EIC. |
| 2 | Washing cleaning of the pump parts like stud nuts, coupling, shaft, impeller, bush, sleeve, rings sequentially then fitting fixing with supplying stud nuts, sleeve rings as per direction of EIC. |
| 3 | Transportation charges of 3 nos 5 hp submersible pump and motor set from site to Bankura workshop (to and fro) with labour charges. |
| 4 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm |
| 5 | Supply Delivery at site of 10 Sq. mm 3 core, 1.1 KV grade, Al. XLPEA cable conforming to IS : 7098 (Part – I) (Make-Approved) |
| 6 | Supply of 32 mm dia PVC pipes & fittings Schedule 80( medium duty) conforming to ASTMD-1785 and threaded to match with GIPipes as per IS:1239(Part - I). Make-PHED approved Make |
| 7 | Supply & delivery 1.1KV grade XLPE/PVC insulated copper 2.5 mm2 3 core flat submersible cable IS-694 for the above pumping machinery , make- Finolex/Gloster/as per approved unified vendor list vide official website of WBPHED |
| 8 | Supply delivey of M.S clamp suitable for holding 150 mm X 40 mm dia pipe. M.S. clamp made of 35mm x 6 mm thick strip, with nuts & bolts for holding 32 mm dia pipe cable protection pipe with 150 mm dia rising main as per direction.N.B- Numbers of M.S clamp should be purchased as per actual site requirement |
| 9 | Laying of Al Ar cable through with fixing & laying of Cable along the lenth of River Bed 150mm dia GI delivery pipe line by the above supplyed M.S Clamp, PVC pipe and G.I Wire as per direction of E.I.C a) 6 Sqmm 3 Core Al, Ar Cable |
| 10 | Laying of 10 sq mm Al Ar supplied XLPE cable in an underground trench in singkle tire formation (horizontal) the trench size W-1800 mm x 1000 mm avarage depth (without brick protection) 1st layer laying and second layer laying (as per requirment at site ) with maintaining gap between two layer of 400 mm and minimum 100 mm gap in between two cable also trench to be filled with shifted soil leveling up and restoring surface duly rammed as [per direction of EIC. |
| 11 | Earthwork in filling in compound, tank, low land, ditchesetc.with good earth, in layersnot exceeding 150mm. Including breaking clodsand consolidating the same by ramming and dressing complete. With earth obtained by fresh excavation upto1800 mm .depth (including the cost of excavation from land arranged by the Deptt. within a lead of 100 m.) |
| 12 | Lowering of repaired submersible pump motor set from river bed tube well after disconnecting of all the electrical and hydraulic connections as per direction of EIC |
| 13 | Opening of the panel ( all the feeders for centrifugal pumps ), necessary cleaning, thightning the electrical connectors, necessary electrical rectification by fitting the above said items with including supply fixing of 2 nos 3 way 200/250 amps power terminal , 1 nos 4 way 200/250 amps power terminal and other item like lugs, cable tie , R/Y/B to complete the work and checking the complete earthing paramerer other to complete the job as per direction of EIC . |
| 14 | Add: 18% GST |
| 15 | Add: 1% Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender