Tender For Addition And Alteration To Certain Smqs In Area I At 18 Wg At Af Stn Pathankot.
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
17 days left
EMD
87368
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition And Alteration To Certain Smqs In Area I At 18 Wg At Af Stn Pathankot.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete fittings such as switches,ceiling roses, pendents, regulators, sockets,tube light fittings etc, removing materials from site and making good disturbed surface of walls & floors etc. |
| 2 | Taking down DB's including MCB's etc all as directed. |
| 3 | Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces. |
| 4 | M & L for Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC insulated and unsheathed FRLSH copper conductor single core multi stranded flexible copper cable 1100 Volts grade conforming to IS-694 using approved colour code as per IS code drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia external) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment including provision for fixing of modular flush boxes of suitable size for fixing of modular switches/sockets/regulator etc along with PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable 1100V (green color) as continuous earth lead wire connected to common earth and earth dolly complete all as specified and directed by Engineer-in-Charge. Make:RRCable/KEI/Polycab/Havells |
| 5 | All as per Ser item No 04 here-in-before but for 06 Amp socket outlets point controlled by one switch on Independent board with the cable 1.50 sqmm size complete all as specified and directed. |
| 6 | All as per Ser item No 04 here-in-before but for 06 Amp socket outlets point controlled by one switch on same board with the cable 1.50 sqmm size complete all as specified and directed. |
| 7 | All as per ser item No 04 here-in-before but for 16 Amp socket outlets point controlled by one switch on Independent socket outlet using 2.5sqmm PVC insulated and unsheathed FRLSH copper conductor single core multi stranded flexible copper cable 1100V of approved colour code as per IS code for phase and neutral along with PVC insulated and unsheathed FRLSH 2.5 sqmm multi stranded copper unsheathed cable 1100V (green color) as continuous earth lead wire connected to common earth and earth dolly complete all as specified and directed. Make: RR Cable/KEI/Polycab/Havells |
| 8 | M & L for module cover plate with frame as per site requirement for following module (a) 1/2 module |
| 9 | (b) 3 module |
| 10 | (c) 4 module |
| 11 | (d) 6 module |
| 12 | (d) 8 module |
| 13 | M & L for Modular metal Flush box as per site requirement.(a) 1/2 module |
| 14 | (b) 3 module |
| 15 | (c) 4 module |
| 16 | (d) 6 module |
| 17 | (d) 8 module |
| 18 | M & L for Blanking plate 1 Module on modular switch board complete all as specified and as directed. Make: Legrand/Havells/Crabtree/Schneider |
| 19 | M & L for modular switch 1 way 6 Amp 1 Module with suitable plate and cover complete all as specified and as directed. Make: Legrand/Havells/Crabtree/Schneider |
| 20 | M & L for modular switch 1 way 16/20 Amp 1 Module with suitable plate and cover complete all as specified and as directed. Make: Legrand/Havells/Crabtree/Schneider |
| 21 | S&F modular socket outlet 5 pin, 6 amps flush type complete all as specified and as directed by Engineer-in-Charge. Make: Legrand/Havells/Crabtree/Schneider |
| 22 | M &L for Modular Socket outlet 6/16Amps, 2 and 3 Pin combined 2 module complete all as specified and as directed. Make: Legrand/Havells/Crabtree/Schneider |
| 23 | M &L for Modular fan step regulator 120 watt 2 module .Make: Legrand/Havells/Crabtree/Schneider |
| 24 | S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete all as specified & directed. Make: Legrand/Havells/Crabtree/Schneider |
| 25 | M & L for modular Bell Push 1 way 6/10 Amp 1 Module with suitable plate and cover complete all as specified and as directed. Make: Legrand/Havells/Crabtree/Schneider |
| 26 | Supply and fixing Lamp holder, white Polycarbonate body, with back plate suitable for batten fittings fixed in position & connecting complete all as specified and as directed. Make: Legrand/Havells/Crabtree/Schneider |
| 27 | S&F Call bell ding dong type AC 230 Volts single pole complete all as specified and directed.. Make: Legrand/Havells/Crabtree/Schneider |
| 28 | S & F in repair wall mounted LED Tube light fitting 20 Watts 6500K including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site on 02 Nos new round blocks including complete all as specified and directed. Make: Havells/Crompton/Bajaj/Philips |
| 29 | S & F in repair wall mounted LED Tube light fitting 10 Watts 6500K including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site on 02 Nos new round blocks including complete all as specified and directed. Make: Havells/Crompton/Bajaj/Philips |
| 30 | Supply and fixing in repair LED Bulk Head type with high output, 10 watt, 220 V AC, Color temperature 6500K or as directed, luminous flux of light 1000 lumens (lm) with all accessories, IP 65 protection dust and water resistant, surge protection up to 2.5kV, PC opal high efficiency diffuser ,LM 80 tested made die cast aluminium housing with complete assembly, suitable for surface/wall mounted with driver holder including connecting up using 1.5 sqmm copper conductor multistrand PVC insulated with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make: Havells/Crompton/Bajaj/Philips |
| 31 | Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases cutting in wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately. Make: Legrand/Schneider/Siemens |
| 32 | Supply and fixing MCB Single Pole 6 to 32 Amps rating 240V, 10KA 'C' curve miniature circuit breaker complete with connection testing and commissioning complete all as specified. Make: Legrand/Schneider/Siemens |
| 33 | Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissionincomplete all as specified and directed. Make: Legrand/Schneider/Siemens |
| 34 | Supply & Fix Single pole and Neutral enclouser with two pin and earth plug and socket complete with one single pole 20 Amps MCB , 230 Volts complete all as specified and directed. Make: Legrand/Schneider/Siemens |
| 35 | M&L Sub main wiring using PVC insulated and unsheathed fire retardant low smoke and halogen (FR-LSH) copper conductor single core multi stranded unsheathed copper cable 4.00 sqmm (for Phase and neutral) and earth continuity conductor of size 4.00 sqmm multistranded copper conductor FRLSH 1100V conforming to IS:694 (2010) using approved colour code for phase and neutral as per IS code drawn through non-metallic PVC rigid concealed conduit, 20mm outer dia (ISI marked) heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick. The external dia shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I (ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories complete all as specified and as directed by Engineer-in-charge . Make: RR Cable/KEI/Polycab/HavellsNote 01: 2 runs of 4.00 sqmm copper cable & 1 run of 4.00 sqmm FRLSH copper cable in and including 20mm PVC conduit shall be measured as one unit.Note 02: The rate of cutting chases required for concealed conduit/flush boxes etc. is deemed to be included in overall rate quoted and nothing extra shall be paid for this. |
| 36 | M&L Sub main wiring using PVC insulated and unsheathed fire retardant low smoke and halogen (FR-LSH) copper conductor single core multi stranded unsheathed copper cable 6.00 sqmm (for Phase and neutral) and earth continuity conductor of size 6.00 sqmm multistranded copper conductor FRLSH 1100V conforming to IS:694 (2010) using approved colour code for phase and neutral as per IS code drawn through non-metallic PVC rigid concealed conduit, 20mm outer dia (ISI marked) heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick. The external dia shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I (ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories complete all as specified and as directed by Engineer-in-charge. Make: RR Cable/KEI/Polycab/HavellsNote 01: 2 runs of 6.00 sqmm copper cable & 1 run of 6.00 sqmm FRLSH copper cable in and including 20mm PVC conduit shall be measured as one unit.Note 02: The rate of cutting chases required for concealed conduit/flush boxes etc. is deemed to be included in overall rate quoted and nothing extra shall be paid for this. |
| 37 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast. |
| 38 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified. |
| 39 | Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 40 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type c-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement. |
| 41 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative designer type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charg. NOTE: DESIGN OF WPC DOOR TO BE DECIDED BY ENGR IN CHARGE. |
| 42 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative designer type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Chare NOTE: DESIGN OF WPC DOOR TO BE DECIDED BY ENGR IN CHARGE. |
| 43 | S&F Factory made single extruded WPC (wood polymer composite) 35mm thick solid wire gauge door shutters including of double wire mesh (steel & aluminium XPM) , Comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof , water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screw , joint-less design manufactured with cnc machine . design as per executive engineer . NOTE: DESIGN OF WPC DOOR TO BE DECIDED BY ENGR IN CHARGE. |
| 44 | S&F in repair floor door stopper of overall length of cover plate 140mm or 150mm alluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 45 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. |
| 46 | Supply and fixing in repair factory made 20 mm thick solid WPC(wood particle composit) without prelam sheet having both side wood nature colour for cupboard partitions/slabs of density 600 kg /Cbm bent 90° including 100% termite/water proof, fire rertradent, Eco friendly complete all as specified & directed by Engineer-in-Charge. |
| 47 | Supply and fixing factory made 25mm thick solid WPC(wood particle composit) sheet one side UV printed (of pattern as approved by GE)and other side wood nature colour for cupboard shutter of density 600 kg /Cbm bent 90° including 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level etc complete all as specified & directed by Engineer-in-Charge. |
| 48 | S & F continous piano hinges (30mm width of flaps when open) mild steel, bright finish complete all as specified and directed |
| 49 | S&F Stainless steel Handel of 100 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 50 | M&L high quality magnet catcher for cupboard shuttter, complete all as specified and directed by engineer-in-charge. |
| 51 | S&F in repair 300mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required complete all as specified and directed. |
| 52 | S&F Stainless steel Tower Bolt of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 53 | S&F Stainless steel Handel of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 54 | S&F 300mm long Stainless steel sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, bolts and sliding bolts complete all as specifed and directed by Engr-in-Charge |
| 55 | Supply and fixing Factory made window/Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete. Make/ Manufacture by 1. M/sTee Pee Amritsar 2. M/s Mahindra Fabricators Hayal Pathankot 3. M/S Dhiman Industries, Mamun: NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. NOTE:- During Fixing of Ventilator, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile etc and as per site requirement. |
| 56 | Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, |
| 57 | M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed. |
| 58 | Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water |
| 59 | M&L rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas,ceiling and roof projection making the line in true shape finished even & smooth thout using extra cement including scaffolding up to 7 mtr height. NOTE: THE RATE WILL BE INCLUSIVE OF SCAFFOLDING UP TO DOUBLE STOREY HEIGHT |
| 60 | M&L for newly plastered surfaces of ceiling incl, cornices and applying two coat of distemper oil emulsion incld a coat of primer on ceiling all as spd and directed. |
| 61 | M&L for complete removal of existing surfaces of ceiling incl, cornices (plastered or unplastered) by brooming down and scrapping wherever necessary and applying two coat of distemper oil emulsion on ceiling all as spd and directed. |
| 62 | M&L Rendering 10mm thick in cement mortar 1:6 on fair aces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement,all as specified and directed. |
| 63 | M&L applying 1mm wall care putty on walls and make the surface of level,including preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 64 | M&L Complete removal of existing treatment from internal surfaces of walls by wire brushing and washing, rubbing down and stopping of surfaces , applying 1mm wall care putty on walls and make the surface of level, clean and repair disturbed edgs of bricks/concrete walls finish to even and smooth and applying two coat of oil bound distemper over old surface all as spd and directed by Engr-in-Charge. |
| 65 | M&L Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 inc Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises complete all as specified and directed. |
| 66 | M&L for providing glazed ceramic coloured wall tiles of size 600mmx300mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 including Dismantling of wall tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permisescomplete all as specified and directed. |
| 67 | S&F GI tube 15mm bore medium grade galvanised ISI marked with all fittings complete on walls incl Taking up or down GI pipes 15mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, complete all as specified and directed. |
| 68 | ditto as above but except pipe |
| 69 | M&L cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth all as specified. |
| 70 | S&F GI tube 20mm bore medium grade galvanised with all fittings and fixed to short length incl Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, complete all as specified and directed. |
| 71 | ditto as above but except pipe |
| 72 | S&F in repairs vitreous china wash down water closet (pedestal pattern) white colour including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc complete all as specified and directed. |
| 73 | S&F in repairs vitreous china squatting pan, Orissa pattern size 580mm x 440mm ivory with integral foot rest including connection to drain out pipe and to flush pipe, anti-syphonage pipe etc complete including making good the disturbed flooring of existing specifications complete all as specified and directed. |
| 74 | S&F in repair vitreous china wash hand basin white of bowl size 550x400mm including waste coupling and waste pipe PVC 32mm dia to be fixed over mild steel bracket including 15mm bore pillar tap brass chromium plated with capstan head screwed down high pressure with or without lettered Hot or Cold complete all as specified and directed.make Jaguar |
| 75 | Supplied and fixed in repair 5mm thick looking mirror of size 600x450mm of selected quality glass mounted on 6mm thick AC building board or commercial plywood and aluminium angle beading around mirrior fixed on wall PVC plug and screws etc complete all as specified and directed |
| 76 | S & F in repair for Bathroom cabinet Mirror of size 450mmX350mm wall Mounted, Shape Rectangular fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 77 | S&F for SS Tubular towel rail of chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete. |
| 78 | S&F for Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 50cm long |
| 79 | S&F for Corner glass shelf assembly consisting of 5mm thick sheet glass shelf 30cm wide with chromium plated bracket guard and railing. |
| 80 | S&F in repairs low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed by Engr-in-Charge. |
| 81 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 82 | S&F in repair bib taps long body, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge. |
| 83 | S&F in repairs 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F in repairs concealed stop cock 15mm bore chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge. |
| 85 | S&F in repair pillar tap chromium plated fancy type Swan Neck with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 86 | S&F shower 125mm fixing with 225mm arm to 15mm pipe incl shower arm 15mm size complete all as specified. Make -Jaguar or Technocommercial or equivalent. |
| 87 | S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed. |
| 88 | S & F in repair 25mm outer dia stainless steel bright finished ,fancy type decorative drapery rod of thickness 20 gauge fixed to wall with screws ,PVC gully including all necessary fixing arrangement including taking down old curtain rod complete all as specified |
| 89 | S&F in repairs stainless steel bright finished ,fancy type decorative brackets fixed with PVC plug/gutty & screws etc complete all as specified . |
| 90 | S&F in repairs stainless steel bright finished ,fancy type decorative end caps fixed complete all as specified . |
| 91 | Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 500 litres Vectus-smart weight of tank 22 to 25kg/tank , Blue colour, (cylindrical vertical with closed top) hoisted including Vectus T-Base, and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nut etc complete including dismantling existing water tanks Rcc/Iron/Pvc all as specified and directed. Tank should be marked with stencil letter cutting Date and Year with enamel paint..(Make-Vectus/Suprime/plasto) |
| 92 | S&F in repairs soap dish dish type of milld steel Chromium plated and wooden/plastic cleats , complete all as specified and as directed. Make - Jaguar |
| 93 | S&F in repair SS chromium plated, plated peg set of six fixed with screw complete all as specified and directed. |
| 94 | Taking down eaves gutters (any size or pattern),CI pipe including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 95 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as spd and directed |
| 96 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as spd and directed |
| 97 | S&F 75mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as spd and directed |
| 98 | S&F 75mm dia PVC (SWR) bends any radius complete all as spd and directed |
| 99 | S&F 110 mm dia PVC (SWR) bends any radius with access door complete all as spd and directed |
| 100 | S&F 110 mm dia PVC (SWR) bends any radius complete complete all as spd and directed |
| 101 | S&F 110 mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as spd and directed |
| 102 | Dismentling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness at any height, including cover fillets, Providing and fixing tiled flase ceiling of size 595x595 mm incl of ceiling tiles in true horizontal level suspended on inter locking matrix 32 mm matel grid of hot dipped galvanised steel sections (galvanised @120gms per sqm both side incl) consisting of 3600mm long main \\"T\\" of size 24x25mm and 0.30mm thick and PPGI sheet wall angle of size 24x24mm and 0.40mm thick. Bottom exposed capping of width 24mm of all T sections shell be 0.25mm thick. PPGI wall angle is fixed aling the perimeter of ceilings to walls, partition or columns etc with rawl plug and wooden secrews at 300mm denters. Main T runners are than suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12mm dia and 38mm long dash fatners, 6 mm threaded rod with bolt for hanging arrangement of ceiling at max 1200 mm center to center along main T and not more than 150mm with slipped joints, the last hanger at the end of each main runner should not be greater than 600mm from adjecent wall. than 1200mm long cross T is interlocked between the main T at 600 mm center to center to form at grid 1200x600mm and than secondary cross of length 600mm is interlocked at middle of 1200x600mm grid to form grids of 600mmx600mm . cross T at the ends having length more than 600mm are to be supported independently. Finally PVC laminated with aluminium foil back board tiles of size 600x600x7 to 8mm thick tiles having light refectors of >=75% are placed in the grid complete all as specified and directed. |
| 103 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 104 | Preparation of old painted steel surface of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F in repair glavinized mild steel wire cloths 0.56 mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or glavinized wire staples to old windows/door including taking down of old rusted wire mesh from windows/doors complete all as specified and directed. |
| 106 | Demolition of Concrete of any description (unreinforced) and in any position complete all as specified and directed by Engineer-in-Charge |
| 107 | Supply only liquid water proofing compound of approved quality complete all as specified and directed by Eng-in-charge. |
| 108 | M&L PCC 1:4:8 type D-2,using 40 mm graded stone aggregate as in foundation filling and mass concrete. |
| 109 | M&L for cutting opeaning through brick walls for doors,window and other opeanings or enlarging existing openings,converting windows into door etc or cutting out for defective brickwork including making plastering the damaged surface & making good and cleaning and stacking bricks,removing surplus servicable bricks etc to store and removing the rubbish not exceeding 50m complete all as spd and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender