Tender For Electrical Renovation Works To Setting Up New Court With Chambers, Bathroom At Various Premises Under Judges Court, Kolkata-27
Tender Value
8.64 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
6 days left
EMD
17284
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrical Renovation Works To Setting Up New Court With Chambers, Bathroom At Various Premises Under Judges Court, Kolkata-27
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 2 | a) 8 way (4 + 24), Double door [DSR (E&M)-2025, P-14/2.5.2] [Make :-Legrand/Siemens/L&T or as approved by EIC] |
| 3 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). [DSR (E&M) 2025,P-14/2.4] Make list as per CPWD General Specification for electrical works |
| 4 | 6 way (4 + 18), Double door [DSR (E&M) 2025,P-14/2.4.2] [Make :-Legrand/Siemens/L&T or as approved by EIC] |
| 5 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) [DSR (E&M) 2025,P-14/2.3] Make list as per CPWD General Specification for electrical works |
| 6 | 12 way , Double door [DSR (E&M) 2025,P-14/2.3.3] [Make :-Legrand/Siemens/L&T or as approved by EIC] |
| 7 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 8 | (b) 40 A [DSR (E&M)-2025, P-15/2.12.1] [Make :-Legrand/Siemens/L&T or as approved by EIC] |
| 9 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 10 | 63A [DSR (E&M)-2025, P-15/2.13.2] [Make :-Legrand/Siemens/L&T or as approved by EIC] |
| 11 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. |
| 12 | 125 A,36KA,FPMCCB [DSR (E&M)-2025, P-13/2.2.14] [Make :-Legrand/Siemens/L&T or as approved by EIC] |
| 13 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 14 | Single pole [DSR (E&M)-2025, P-15/2.10.1] [Make :-Legrand/Siemens/L&T or as approved by EIC] |
| 15 | 63 Amps TP MCB [ 7 / D- 6] [Make :-Legrand/Siemens/L&T or as approved by EIC] |
| 16 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable [Make: Gloster/Polycab/Havells/RR Kable or as approved by E.I.C] in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box (Legrand Myrius/Arterior or equivalent Model of Roma Urban or as approved by EIC) and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 17 | Group B [DSR (E&M)-2025, P-3/1.10.2] |
| 18 | Wiring for circuit/ submain wiring along with earth wirewith the following sizes of FRLS/HFFR PVC insulatedcopper conductor, single core cable [Make: Gloster/Polycab/Havells/RR Kable or as approved by E.I.C] in surface/ recessed medium class PVC conduit as required. |
| 19 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire [DSR (E&M)-2025, P-4/1.14.11 ] |
| 20 | Supplying and fixing of following sizes of mediumclass PVC conduit (Make:-Precision or as approved by EIC) along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 21 | 20 mm size [ DSR (E&M)-2025, P-6/ 1.21.1 ] |
| 22 | Supplying and drawing following sizes of FRLS/HFFRPVC insulated copper conductor, single core cable [Make: Gloster/Polycab/Havells/RR Kable or as approved by E.I.C] in the existing surface/ recessed steel/ PVC conduit asrequired. |
| 23 | i) 3 x 1.5 sq. mm [DSR (E&M)-2025, P-4/1.17.3] |
| 24 | ii)3 x 2.5 sq. mm [DSR (E&M)-2025, P-4/1.17.12] |
| 25 | iii)3 x 4 sq. mm [DSR (E&M)-2025, P-4/1.17.21] |
| 26 | iv)3 x 6 sq. mm [DSR (E&M)-2025, P-4/1.17.30] |
| 27 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 28 | a)1.5 sq mm |
| 29 | b) 2.5 sq mm [9(i) / F-5] |
| 30 | c) 4 sq mm [9(ii) / F-5] |
| 31 | d) 6 sq mm [9(iii) / F-5] |
| 32 | f) 16 sq mm [9(v) / F-5] |
| 33 | Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Legrand Myrius/Arterior or equivalent Model of Roma Urban or as approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.. [12 /E-18 ] |
| 34 | Supplying & fixing suitable size GI box with modular plate and cover (Legrand Myrius/Arterior or equivalent Model of Roma Urban or as approved by EIC) in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required [DSR (E&M)-2025, P-11/1.57] |
| 35 | Supply & Fixing 240 V,25 A, 3 pin Modular type plug topwith indicator (L&T/Anchor or as approved by EIC) & necy. Connections [5(b)/E-17] |
| 36 | Supplying and fixing suitable size GI box with modular plate and cover (Legrand Myrius/Arterior or equivalent Model of Roma Urban or as approved by EIC) in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.[DSR (E&M)-2025, P-8 / 1.32 ] |
| 37 | Supplying and fixing suitable size GI box with modularplate and cover (Legrand Myrius/Arterior or equivalent Model of Roma Urban or as approved by EIC) in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modularswitch, connections etc. as required. (For light plugsto be used in non residential buildings). [DSR (E&M)-2025, P-11 / 1.56 ] |
| 38 | Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)[ 29)/D-14 ] |
| 39 | Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991)[ 30/D-14 ] |
| 40 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required..[DSR (E&M)-2025, P-7 / 1.25 ] |
| 41 | Supply and fixing 415 V TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it (Siemens/ L &T or as approved by EIC) of different sizes [ 4(a)/D-3 ] |
| 42 | a) 125A |
| 43 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. [DSR (E&M)-2025, P-32/5.18] |
| 44 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (a) Above 35 sq. mm and upto 95 sq. mm (clamped with25x3mm MS flat clamp) [DSR (E&M)-2025, P-66/10.7.2 ] |
| 45 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 46 | 4 X 50 sq. mm (35mm) [DSR (E&M)-2025, P-69/11.1.35] |
| 47 | Supplying and delivery of following size Armoured cables XLPE/PVC insulated are designed for 1.1 kV Stranded Aluminium conductor, high tensile galvanized steel wire/strip armour for mechanical protection, and PVC/FR PVC outer sheathing power cable of following size. (IS 7098 Part - 1/2011 with Up To Date Amendments.) [Make: Gloster/Polycab/Havells/RR Kable or as approved by E.I.C] |
| 48 | 4 core 50 sqmm |
| 49 | Supply & fixing automatic single phase AC starter of 21Amp capacity equipped with Timecheck, Voltcheck & Ampcheck and 3-digit display (Make- Electron-model no.-OPL-3+ or equivalent model of LT/Legrand or as approved by E.I.C) to be fixed on 4Module GI box with all fixing accessories complete as to G.S. |
| 50 | S & F timer control unit for 1ph ac machines(make L& T/legrand/siemens/ABB) in existing DBs |
| 51 | 12 way SPN DB or Timer DB---1 no. |
| 52 | 40 A DP isolator---1 no. |
| 53 | Digital 24 hrs time switch---1 no. |
| 54 | 32A 2pole power contactor---1 no. |
| 55 | centre off 2way toggle switch---1 no. |
| 56 | 32 A barrier type terminal---1 no. |
| 57 | LED indicating lamp---2 nos. |
| 58 | 2x4+1x2.5 sqmm Cu wire [Make: Gloster/Polycab/Havells/RR Kable or as approved by E.I.C] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender