Tender For Addition/ Alteration And Improvement To Building No. P-298 At Np Area At Afs Hakimpet Under Ge (Af) Hakimpet (Tender Id No. 2026_Mes_787711_1)
Tender Value
42.70 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
2 days left
EMD
85400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/ Alteration And Improvement To Building No. P-298 At Np Area At Afs Hakimpet Under Ge (Af) Hakimpet (Tender Id No. 2026_Mes_787711_1)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as directed by Engineer-In-Charge. |
| 2 | M&L 25 mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in floors all as specified and directed. |
| 3 | M&L Non-skid Ceramic coloured tiles (Rectified tiles) of 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed. |
| 4 | M&L Non-skid Ceramic coloured tiles (Rectified tiles) of 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm approved 1st quality in floors etc along with rendering of 10mm thick in CM 1:4 to stone/ brick masonry, scoured for fixing tiles/ stone slabs as in skirting/dados in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed. |
| 5 | M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.06 sqm but not exceeding 0.11 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises. |
| 7 | M&L for rendering to Stone masonry surfaces or fair faces of concrete surfaces, 10mm thick in cement mortar 1:4, scoured for fixing tiles /stone slabs in skirting/ dados etc to complete all as specified and directed. |
| 8 | M&L Glazed Ceramic tiles coloured, of size 450mmX350mm/300mmX7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above. |
| 9 | Dismantling of stone slabs of any description or thickness in floors and approns etc, laid,bedded and pointed in any mortar all as specified and directed. |
| 10 | M&L 17-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 11 | M&L 15-20 mm thick Sadarahalli Stones slab (of any type), in steps,Skirting and risers etc any colour, Polished bedded over cement screed bed 10mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 12 | Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed. |
| 13 | M&L Roughening surfaces of old concrete floor as in sunken floors by wire brush,air blower, sweeping clean, washing down with water to remove dust,etc, Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces, Rendering 10mm thick in CM 1:3 mixing with WPC and Applying evenly 2 coats of polyurathane sealent, providing and applying cold applied elastomeric smart care damp proof ultra (fiber reinforced elastomeric liquid applied water proofing membrane) complete all as specified and as directed. Make : Asian Paints smart care waterproofing/Pidilite or equivalent. Note :- WPC will be measured and paid separately. |
| 14 | M&L Cement concrete type D2 1:4:8 (40mm graded) in foundations, filling and mass concrete all as specified and directed. |
| 15 | Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as directed. |
| 16 | M&L Rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra cement all as specified and directed. |
| 17 | M&L Rendering 15 mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr all as specified and as directed. |
| 18 | M&L Rendering 10 mm thick in CM 1:3 on celling surface, finished even and smooth with out using extra cement up to ht 6.5 m all as specified and directed. |
| 19 | M&L 3 coats of white wash over a coat of primer on newly plastered surfaces on ceilings complete all as specified and as directed. |
| 20 | M&L Complete removal of existing treatment on walls complete all as directed. |
| 21 | M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as directed. |
| 22 | M&L Raking out and Raised Pointing of CM 1:4 joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in Cement mortar as in directed. |
| 23 | M&L Finishing walls on Stone/Brick masonry with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm) complete all as directed. |
| 24 | M&L Complete removal of existing treatment on ceilings complete all as directed. |
| 25 | M&L 3 coats of white wash over a coat of primer on old plastered surfaces on ceilings complete all as specified and as directed. |
| 26 | Dismantling of existing PVC 500-1000 ltrs water tank complete all as specified and directed. |
| 27 | S&F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position complete all as specified and directed. |
| 28 | S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed. |
| 29 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all as specified and directed. |
| 30 | Taking down Chowkhats or frames with shutters nexc 1.5sqm each complete all as directed |
| 31 | Taking down Chowkhats or frames with shutters exc 1.5 sqm but n exc 4 sqm each complete all as specified and as directed. |
| 32 | Taking down, Resecuring or easing and refixing shutters of any description exc 1 sqm and n exc 2 Sqm with new builders hardware articles wherever necessary each complete all as specified and directed by Engineer-in-charge. |
| 33 | Taking down shutters but exc 1.0 Sqm and not exc 2 sqm each complete all as specified and directed |
| 34 | S&F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified |
| 35 | S&F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified |
| 36 | S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints all as specified & directed. |
| 37 | S&F 35 mm thick flush shutters solid core construction with block board and plywood face panels commercial type on both sides complete all as specified and directed. |
| 38 | S&F 30mm 2nd class HW thick factory made skeleton shutters, open rebated and preparedto receive gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut mitred beads for securing glass,etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed. |
| 39 | S&F 125mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, for flush pressed steel door frame complete all as specified directed by the Engineer-in-Charge |
| 40 | S&F 200mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge |
| 41 | S&F 150mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge |
| 42 | S&F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed. |
| 43 | S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed by the Engineer-in-Charge. |
| 44 | S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed by the Engineer-in-Charge. |
| 45 | M&L for Preparing New wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer-in-Charge. |
| 46 | M&L for Preparing Old wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 47 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 48 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 49 | S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for WPC door frame along with strong adhesives to Brass screws complete all as specified and directed by the Engineer-in-Charge |
| 50 | S&F 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge |
| 51 | S&F 125 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge |
| 52 | S&F Powder coated Aluminium frame for doors,windows/ Louvered and partitions with one or more rebates including cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-charge. |
| 53 | S&F Powder coated Aluminium window shutters, sliding type Three track with frame for fixing glass sections of aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and as directed. Note : Glass will be measured and paid separately under relevant item.complete all as specified and as directed. |
| 54 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge. |
| 55 | S&F 4.0 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane thick plain/ tinted glass of superior quality complete all as directed. |
| 56 | S&F MS powder coated Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed and specified by Engr-in-Charge. |
| 57 | S&F in repairs 25mm dia Stainless steel curtain rods with fixing brackets, End caps, stops, rollers etc.and taking down old pipe complete all as directed. |
| 58 | S&F 18/19mm Block boards factory made WPC 100% lead free ROHS certified thick prelaminated shutter for kitchen cupboards, shutters, grade 1 quality, exterior grade, commercial type, fixed with screws complete all as specified and directed. |
| 59 | S&F Stainless steel Handle 100mm dia as directed. |
| 60 | S&F Clip on soft hinges full overlay as directed.Make : Godrej |
| 61 | Extra over rates of 18/19mm thick particle board for external teak wood lipping, 6 mm thick,fixed with nails complete all as specified and as directed. |
| 62 | Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed. |
| 63 | S&F brass magnet for cupboard complete all as specified and as directed. |
| 64 | Taking down steel tubing and connections 15 mm and removal to store all as directed. |
| 65 | All same as per item No 65 here in before but 25 mm bore. |
| 66 | S&F 20mm bore CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 with all fittings such as bends, tees, nipples, elbows, reducers etc fixed complete to walls, ceilings,floors etc. in repairs complete all as directed. |
| 67 | All as per item above 66 but 25mm bore. |
| 68 | Cutting of Stone/Brick massonry wall for concealed water tubing or concealed conduit wiring and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc not exc 10 cm girth all as specified and directed. |
| 69 | S&F sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size of 610mmX510mm bowl size 560mmX460mmX203mm including waste couplings, waste pipe in repairs and all other necessary fittings all as specified and directed. |
| 70 | S&F in repairs CP Bibtap 15mm bore for Kitchen sink regular spout with flange of Make: Prayag, Catpart No 6616 or equivalent in other make complete as directed by the Engr-in-charge. |
| 71 | Taking down old plate rack and refixing new stainless steel plate rack of minimum size 970x770x230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified and directed. |
| 72 | S&F Vitreous China wash hand basin whiteflat back, along with Pedestal size 550x400mm in repairs including couplings, waste pipe, connections all fittings complete all as directed. |
| 73 | S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. Make : Prayag Catpart No - 7314 or equivalent in other make. |
| 74 | S&F 600 x 450 mm mirror of selected quality glass of frame less, fixed to half cut glass clips with chromium plated brass screws and cup washers in repairs complete all as directed. |
| 75 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..and Seat cover for pedestal pan with all as specified and directed. |
| 76 | S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long with brass nuts and washers complete all as specified and directed. |
| 77 | S&F in repairs brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed by the Engineer-in-Charge. Make : Prayag/Parryware or equivalent |
| 78 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 79 | S&F in repairs brass CP wall mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed as specified and directed. Make: Prayag or equivalent in other make. |
| 80 | S&F in repairs brass CP shower rose with arms 75 mm size fixed all as specified and directed. |
| 81 | S&F 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed. Make: Prayag/Parryware or equivalent. |
| 82 | S&F 15 mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair.Make: Prayag/Parryware or equivalent. |
| 83 | S&F in repairs Chromium plated (CP) Toilet paper holder of vitreous china fixed to walls brass screws complete all as specified and directed |
| 84 | S&F Sheet glass shelf assembly for WHB consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long in repairs complete all as specified and directed |
| 85 | S&F Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard in repairs complete all as specified and directed |
| 86 | S&F CP Towel ring for WHB in repairs complete all as specified and directed |
| 87 | S&F in repairs Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed all as directed. |
| 88 | S&F CP Soap dish fixed to plugs with chromium plated complete all as specified and directed |
| 89 | S&F Stainless Steel Pegset of 4 No Pegs fixed withand including CP brass screws and wooden/Plastic cleats and fixed in repairs complete all as specified and directed. |
| 90 | S&F SS Grating round 140mm dia (Minwt 50g) and fixed in repairs all as specified and directed. |
| 91 | S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs all as specified and directed. |
| 92 | S&F PVC (SWR) floor trap of 75mm in repairs, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed. |
| 93 | Demolition/Dismantling of CI/ PVC/ drain or waste pipes on floor or in wall any dia complete all as specified and directed. |
| 94 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 95 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 96 | S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed. |
| 97 | S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 98 | S&F PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 99 | S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed. |
| 100 | S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed. |
| 101 | S&F PVC (SWR) branch piece of 110mm bore, double (double Y) equal or unequal complete all as specified and as directed. |
| 102 | S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed. |
| 103 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 104 | M&L for Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, manholes including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed by Engineer in charge. |
| 105 | M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed. |
| 106 | Material and labour for providing reinforced precast cement concrete type C1 1:3:6 set in cement mortar 1:6 as in cover slabs as in drain covers and etc complete all as specified and as directed. |
| 107 | Material and labour for TMT bars 10 mm dia and over ,cut to length bent to shape required including cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc complete all as specified and as directed. |
| 108 | M&L Plain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint filling as directed by Engineer In charge. |
| 109 | Removing excavated material exc. 1.5 m but n.exc 5km and depositing where directed |
| 110 | S&F CP Bib cock nozzle with flange 15mm bore for Washing machine tap regular spout with flange of Make: Prayag, Catpart No 7305 or equivalent in other make complete as directed by the Engr-in-charge. |
| 111 | M&L Hardcore of gauge nexc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to surface complete all as directed. |
| 112 | M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. all as specified and directed. |
| 113 | M&L for Colour Chequered cement concrete tiles 30x30cmx25mm thick with grey cement and pigment set jointed and pointed in neat cement slurry colour to match including Screed bed of mortar 15 mm thick for laying floor finishes with cement motor 1:4 complete all as directed. |
| 114 | M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed. |
| 115 | Dismantling of Asbestos cement sheets in roof coverings complete all as directed |
| 116 | Dismantling of wrought iron work or mild steel of any description not otherwise provided for all as specified and directed. |
| 117 | M&L for cutting holes exc 100sqcm but nexc 250sqcm into or through cement concrete slabs, chajjas, etc reinforced or otherwise complete all as specified and directed. |
| 118 | S&F of Mild steel Hollow Square/Rectanguler sections as in main and cross beams, hip and jack rafters, hollow/solid section columns: purlins where connected to common rafters and running rails and guids for sliding doors: fixed with angle cleats or other connecting plates all as specified and directed. |
| 119 | M&L pre painted glavalume aluminium zinc coating GI based plain/corrugated sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, roof overing/cladding to wall, fixed with self tapping screws as specified (Note :- The length of self tapping screw may vary for wooden and steel truss. Contractor to quote rate accordingly.) |
| 120 | M&L Roughening surfaces of old concrete floor/roof surfaces by picking, sweeping clean and washing down with water to remove dust,etc and Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces. |
| 121 | M&L Providing, cement concrete in roof padding of type B0 1:2:4 (12.5mm graded aggregate) all as directed. |
| 122 | M&L Rendering 15mm thick on fair faces of brick work / concrete surfaces in CM 1:3 finished even and smooth without using extra cement and mixing with WPC as per manufacturers instruction. Note:- WPC will be measured and paid separately. |
| 123 | Supply only liquid water proofing compound to incorporate in above item. |
| 124 | M&L Applying evenly a priming coat of industrial bitumen 85/25 at the rate of 0.3 kg per sq.m including cleaning surfaces complete all as specified and directed |
| 125 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 126 | M&L applying two coats of aluminium paint @ 0.1 ltr/Sqm per coat complete all as directed. |
| 127 | Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 128 | Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 129 | Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors |
| 130 | Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors |
| 131 | M&L for MS Framed brackets of angles or tees For Grill door, Wicket gate, Ladder with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, MS Round bars conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed by the Engineer-in-Charge. |
| 132 | M&L for Preparing new steel and iron surfaces of any description over 10 cm widthor girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge. |
| 133 | Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed |
| 134 | Material and labour for stone/brick/concrete wall cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.and cutting chases exc 10cm width and 20 cm not exc for concealed water tubing or concealed conduit wiring pipes laying, etc. and making good,cutting surface properly with white cement/ putty for smooth finishing with existing wall surface complete all as specified and directed.Note :- Stone masonry/Brick masonry/Concrete wall cutting work by using diamond stone cutting tools must be used to cut the surfaces for PVC conduit pipes laying for internal wiring/water pipes etc. Please Enable Macros to View BoQ information |
| 135 | Material and labour for stone/brick/concrete wall cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.and cutting chases exc 10cm width and 20 cm not exc for concealed water tubing or concealed conduit wiring pipes laying, etc. and making good,cutting surface properly with white cement/ putty for smooth finishing with existing wall surface complete all as specified and directed.Note :- Stone masonry/Brick masonry/Concrete wall cutting work by using diamond stone cutting tools must be used to cut the surfaces for PVC conduit pipes laying for internal wiring/water pipes etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender