Tender for Addition/alteration Improvement to gym at no. 01 Officers at afs Hakimpet Under ge af Hakimpet.
Tender Value
24 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
17 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/alteration Improvement to gym at no. 01 Officers at afs Hakimpet Under ge af Hakimpet.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-charge. |
| 2 | Taking down Chowkhats or frames with shutters exc 1.5 sqm but n exc 4 sqm each complete all as specified and as directed by Engineer-in-charge. |
| 3 | M&L for Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, manholes including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed by Engineer in charge. |
| 4 | Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as directed by Engineer-In-Charge. |
| 5 | Excavation in trenches not exceeding 1.5m in depth and getting out in hard/ dense soil including cutting of roots/ branches below ground level where ever required complete all as specified and as directed by Engineer-in-charge. |
| 6 | M&L for cement concrete in foundation,filling and mass concrete as sub base type D2 1:4:8(using 40mm graded aggregate) complete all as directed by Engineer-In-Charge. |
| 7 | M&L TMT bars 10 mm dia and over ,cut to length bent to shape required incl cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc complete all as directed by Engineer-In-Charge. |
| 8 | M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as directed by Engineer-In-Charge. |
| 9 | M&L Formwork for rough finished surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-charge. |
| 10 | M&L Form work to sides of pillars, posts, struts,piers columns and similar work etc with rough finished surfaces complete all as specified and directed by Engr-in-charge. |
| 11 | M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc with rough finished surfaces complete all as specified and directed by Engr-in-charge. |
| 12 | M&L for RCC M25 (Design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed as in Engr-in-charge. |
| 13 | M&L for RCC M25 (Design mix) as in RCC Columns, pillars, piers, posts and struts complete all as specified and directed as in Engr-in-charge. |
| 14 | M&L for RCC M25 (Design mix) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed as in Engr-in-charge. |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as directed by Engineer-In-Charge. |
| 16 | M&L 25 mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in floors complete all as directed by Engineer-In-Charge. |
| 17 | M&L Double charged /Glazed Vitrified Ceramic tiles of dark/light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm n exc 1.00 sqm, in floors etc. with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed by Engineer-In-Charge. |
| 18 | M&L Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm n exc 1.00 sqm, with 10mm thick screed bed or bedding layer in CM 1 : 4 for skirting in neat cement slurry and pointed in white or coloured cement to match complete all as directed by Engineer-In-Charge. |
| 19 | M&L Non-skid Ceramic tiles (Rectified tiles) of 8 to 9 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as directed by Engineer-In-Charge. |
| 20 | M&L Non-skid Ceramic tiles (Rectified tiles) of 8 to 9 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm approved 1st quality in floors etc along with rendering of 10mm thick in CM 1:4 to stone/ brick masonry, scoured for fixing tiles/ stone slabs as in skirting/dados in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as directed by Engineer-In-Charge. |
| 21 | M&L Vitrified Endura Tiles (Parking, Flooring, Path and other purposes) of any shade (10-12) mm thick (square/ rectangular) polished, area of each tiles exc 0.09 sqm and n exc 0.16 Sqm, in floors etc along with screed bed or bedding layer in CM 1:4 of mortar 15 mm thick for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed by Engineer-In-Charge. |
| 22 | M&L Hardcore of gauge nexc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to surface complete all as directed by Engineer-In-Charge. |
| 23 | M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. all as specified and directed. |
| 24 | M&L 50mm sand filling under floor or in foundations including watering and consolidation complete all as directed by Engineer-In-Charge. |
| 25 | M&L Machine pressed precast conctete Interlocking paver block with grey cement and colour pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 complete all as directed by Engineer-In-Charge. |
| 26 | M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or complete all as directed by Engineer-In-Charge. |
| 27 | M&L 20mm thick Gym Rubber tiles multi colour of Matte finish for Gym flooring (Skid resistance, shock absorption) laid in floors with approved adhesive over tiles making good at corners complete all as specified and directed by Engr-in-charge. |
| 28 | Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed by Engineer-in-charge. |
| 29 | M&L Glazed Ceramic External Elevation tiles coloured, of size 450mm X350mm/300mm X7mm thick approved 1st quality as in vertical surfaces along with rendering to Stone/Brick masonry surfaces 10mm thick in cement mortar 1:4, such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles complete all as directed by Engineer-In-Charge.Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above. |
| 30 | Removing excavated material exc 250 m but n.exc 500m and depositing where complete all as directed by Engineer-In-Charge. |
| 31 | M&L 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed by Engineer-In-Charge. |
| 32 | Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed. |
| 33 | M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 34 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as directed by Engineer-In-Charge. |
| 35 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as directed by Engineer-In-Charge. |
| 36 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories is included and packing the gaps with silicon sealent complete all as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)(A) Area not exceeding 2.00 sqm each |
| 37 | S&F factory made uPVC white colour Fixed glazed window/ventilator made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 38 | S&F 10mm Toughned glass as in hinged doors, partitions automatic doors, fixed windows, sliding windows and similar work including cutting to shape, drilling holes as required complete all as directed by Engineer-In-Charge. |
| 39 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | S&F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty exc 0.5sqm in each pane complete all as directed by Engineer-In-Charge. |
| 41 | S&F in repairs 25mm dia Stainless steel curtain rods with fixing brackets, End caps, stops, rollers etc.and taking down old pipe complete all as directed by Engineer-in-Charge. |
| 42 | S&F Venetian Blinds roller type of any colour with three adjustment type (See through, Half shade, and Full shade) complete all as directed by Engineer-In-Charge.Make : Mac or equivalent. |
| 43 | S&F MS Powder coated Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed and specified by Engr-in-Charge. |
| 44 | Dismantling structural steel work including doors, gates but excluding framedtruss etc. |
| 45 | S&F of Mild steel Hollow Square/Rectanguler sections as in main and cross beams, hip and jack rafters, hollow/solid section columns: purlins where connected to common rafters and running rails and guids for sliding doors: fixed with angle cleats or other connecting plates complete all as directed by Engineer-In-Charge. |
| 46 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as directed by Engineer-In-Charge. |
| 47 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 48 | M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as directed by Engineer-In-Charge. |
| 49 | M&L 6-8 mm Wall mounted Glass mirror, Glossy finish for Gym of rectangle /square in shape with safety backing, clean and polished edges with proper mounting installed using mastic or J channels for secure, safe mounting along with all necessary screws, mirror clips, adhesives and corner guards complete all as specified and directed by Engr-in-charge. |
| 50 | S&F GI powder coated snap grid frame work of size 600X600mm having Main Tee of 24X32mm, Cross Tee 24X26mm and L angle of 24X24mm for false ceiling along with Hangers 2 mm dia GI (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as directed by Engineer-In-Charge. |
| 51 | M&L 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as directed by Engineer-In-Charge. |
| 52 | M&L Rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra cement complete all as directed by Engineer-In-Charge. |
| 53 | M&L Rendering 15 mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr complete all as directed by Engineer-In-Charge. |
| 54 | M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as directed by Engineer-in-charge. |
| 55 | M&L Finishing walls on Stone/Brick masonry with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm) complete all as directed by Engineer-In-Charge. |
| 56 | Demolition and breaking up drain pipes (salt glazed stone ware) set in cement mortar of internal dia of pipe 150 mm and disposing of broken pipes complete all as directed by Engineer-In-Charge. |
| 57 | M&L salt glazed stone ware drain pipes grade 'A' laid in trenches and jointed with cement mortar 150 mm bore of pipe complete all as directed by Engineer-In-Charge. |
| 58 | M&L cement concrete bed in 1:3:6 type C2 (Using 40 mm graded stone aggregate) to drain pipe including packing under and haunching against the sides of the pipe after they are laid and tested for the 150 mm bore of pipe. |
| 59 | M&L for providing reinforced precast cement concrete type C1 1:3:6 set in cement mortar 1:6 as in cover slabs as in drain covers and etc complete all as specified and as directed by Engineer-in-charge. |
| 60 | Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as directed by Engineer-In-Charge. Please Enable Macros to View BoQ information |
| 61 | Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as directed by Engineer-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender