Tender For Providing Of Hard Standing With Pavers Block For Kitchen Of Offrs Mess, Jco Mess, Or Mess & Rhq Complex And Special Repair To Bldg No T-38 At Dogra Fort At Kiari And Special Repair To Bldg No Ta-157 At Karu Under Ge 860 Ews
Tender Value
49.31 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
10 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Hard Standing With Pavers Block For Kitchen Of Offrs Mess, Jco Mess, Or Mess & Rhq Complex And Special Repair To Bldg No T-38 At Dogra Fort At Kiari And Special Repair To Bldg No Ta-157 At Karu Under Ge 860 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Sep-2026 | Change in Period of work and period validity | Other | 24-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n. exc 15cm deep in soft/loose soil. |
| 2 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as spd & directed. |
| 3 | M&L for cement concrete 1:3:6 100mm thick type C-2 using 40mm graded stone aggregate over rammed earth as in sub base to receive floor finish etc complete all as specified. |
| 4 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete. |
| 5 | M & L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B1 1:2:4 (20mm graded aggregate) . |
| 6 | Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified |
| 7 | M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in levelling course. complete all as specified and directed. |
| 8 | SDC Laminated flooring 8mm thick of any coloured manufactured by Direct pressure laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength complete all as specified and directed by Engineer-in-Charge |
| 9 | Taking down chowkats or frame exc 1.5 Sqm and n exc 4 sqm with shutters without taking of shutter from the framecomplete all as specified and directed by Engr-in-Charge. |
| 10 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each |
| 11 | S&F Plain solid straight chowkats or frame rounded or chamfered put together with glue pined at joints with 2nd class hard wood complete all as specified and directed by Engr-in-Charge. |
| 12 | S&F for 30mm thick 2nd class hardwood Plain, framed, panelled door shutters(any number of panels), with panels of timber flat on both sides(feather edged), veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 13 | S&F for 150mm extruded aluminium handle complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F MS butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed by Engr-in-Charge. |
| 15 | S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F Aluminium alloy barrel tower bolt of extruded type 150 mm long complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F for 140 mm over all length of cover plate floor door stopper of aluminium alloy body and tounge, anodized with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-Charge. |
| 18 | Hacking out old broken glass of any thickness size or quality from steel frames complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F for 4mm thick sheet glass ordinary quality and glazing with aluminium snap beading on aluminium frame for door/window and ventilator in square n exc 0.5 sqm each complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L preparation of untreated new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 21 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and treating with two coats of synthetic enamel paint all as specified and directed. |
| 22 | Dismantling wall/ceiling board(fibre, pulp insulation etc.) or insulation boards/slabs/blankets, any thickness including fillets complete all as specified and directed. |
| 23 | M&L 9 mm thick Pre-laminated partical board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails on wall complete all as specified and directed. |
| 24 | M&L 9 mm thick Pre-laminated partical board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails on ceiling complete all as specified and directed. |
| 25 | M&L First class soft wood sectional area not exceeding 6 sqcm Moulding as in cornices, picture rails and the like , secured with nails or brads complete all as specified and directed by Engr-in-Charge. |
| 26 | Dismantling of timber fillet under 40 Sq cm in section in framed work. |
| 27 | M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 6 Sq cm n.exc 13 Sq cm secured with nails or brads. |
| 28 | Demolition of cement concrete (unreinforced) in ground floor and paving etc in exec 15 cm thick below or above GL complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection/ path and fininshed even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 30 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering or wall etc |
| 31 | M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge. |
| 32 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge. |
| 33 | S&F M&L for readymade soft wood wall /Ceiling panelling in strips of 100 mm width 10mm thickness having lounge and groove fixing arrangements fixed to wooden frame work(Size of frame work 1.2X1.2 C/C included ) as per manufacturers instruction including polishing complete all as specified and as directed by Engr-in- Charge .Note : if necassary size of the frame work/ wall paneling will be changed as per site requirement without any cost different complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L for 2nd class soft wood fillets sectional area exc 3 and n exc 6 sqcm rectangular or triangular in section but bullnosed, splayed, chamfered or rounded on one edge of face, secured with nails or brads, complete all as specified and as directed by Engr-in-Charge. |
| 35 | S&F in repair aluminium anodised glazed door complete with shutter size of style top rail and lock rail 83x45x1.60mm thick and bottom rail 114x44x1.60mm thick and door frame size 63x38x1.60 mm including aluminium mongry fitting, hinges, tower bolt, handle, lock etc all necessary fittings and glazing with 5mm thick tinted glass/12mm thick pre laminated particle board complete including rubber lining at sides for air locking with complete all as speicified and as directed by Engr in Charge. |
| 36 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F in repair Mortice brass lock of 4 lever, vertical type, size 100 mm , complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper on walls including cornices, pilasters etc ccomplete all as specified and directed by Engr-in-Charge. |
| 39 | Description all as per item No. 38.00 here in before but on ceiling surfaces. |
| 40 | Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing all retrieved materials such as fitting & fixture from the site and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge. |
| 41 | Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-standard) PVC insulated and unsheathed electric cable 1100 volts in and including PVC casing and capping of 25 mm and above (as per conductor run )with all fittings/ accessories and including PVC insulated and unsheathed electric cable 1100 volts1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including 50 mm deep box made of 2nd class hard board of required size and shape etc covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point,bell,exhaust point, bulk head, independent controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge. ( Make - Finolex/ polycab/ Havells) |
| 42 | Description all as per item No. 41.00 here-in-before but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge.( Make - Finolex/ polycab/ Havells) |
| 43 | Description all as per item No. 41.00 here-in-before but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge. ( Make - Finolex/ polycab/ Havells) |
| 44 | Description all as per item No. 41.00 here-in-before but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge. (Make - Finolex/ polycab/ Havells) |
| 45 | Supply and fixing in replacement switch piano flush button single pole one way 5 Amps complete all as specified and as directed by Engineer in-Charge. |
| 46 | Supply and fixing in replacement socket outlet 2 in 1, 5 Amp, flush type complete all as spe cified and as directed by Engr-in-charge. |
| 47 | Supply and fixing in replacement switch, socket combination 2 in 1, 5 Amp, flush type complete all as specified and as directed by Engr-in-charge. |
| 48 | Supply and fixing in replacement switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge. |
| 49 | Supply and fixing in replacement angular lamp holder, PVC/Polycaronate type with back plate suitable for 12 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge. |
| 50 | Supplying and fixing in replacement LED 12 Watt with 6500 K complete all as specified and directed by Engr-in-Charge. |
| 51 | Supply and fixing in replacement ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge. |
| 52 | Supply and fixing in replacement LED batten lights fitting 1x 20W, 220V,AC decorative type including LED tube light connecting up with three core flexible copper conductor cable of suitable size including ceiling rose complete. |
| 53 | S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Eng-In-Charge. |
| 54 | Supply and fixing in replacement sheet Metal enclosure single shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint all as specified and as directed by the Engr-in-charge. |
| 55 | Supply and fixing in replacement MCB single pole and neutral 32 to 40 Amps , 240 volt, 10 KA, complete all as specified and as directed by the Engineer-in-Charge. |
| 56 | Supply and fixing in replacement MCB single pole 5 to 30 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge. |
| 57 | Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 58 | Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender