Defence Statutory Bodies & Commissions/Committees Closing in 2 days TDR #57340844

Tender For Providing Of Shed And Tiling For Orc And Certain E/M Minor Works At Afs Begumpet Under Ge (Af) Hakimpet(Tender Id No. 2026_Mes_787630_1)

Issued by Statutory Bodies & Commissions/Committees · Hyderabad, Telangana
Tender Value
17.80 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
2 days left
EMD
35600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Providing Of Shed And Tiling For Orc And Certain E/M Minor Works At Afs Begumpet Under Ge (Af) Hakimpet(Tender Id No. 2026_Mes_787630_1)

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 16-Sep-2026 BOQ Corrigendum BOQ 24-Sep-2026

BOQ

Name of Work:- PROVN OF SHED AND TILING FOR ORC AND CERTAIN E/M MINOR WORKS AT AFS BEGUMPET UNDER GE (AF) HAKIMPET(TENDER ID No. 2026_MES_787630_1)
Sl. No. Item Description
1Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out Soft/loose soil complete all as specified and as directed.
2Excavation in post holes or similar holes n.exc 0.50 cum and getting out/returning, filling in and ramming removing surplus soil to a distance n.exc 50 m in soft/loose soil complete all as specified and as directed.
3M & L 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and as directed.
4M & L 30 cmx30 cmx19-20mm thick chequerd cement concrete tiles grey cement with pigment set and jointed in neat cement slurry including 15 mmm thick screed bed or bedding layer in CM 1:6 as in base to floor finish complete all as specified and as directed.
5M & L PCC (1:4:8) type D-2 using 40 mm graded aggregate as in foundation and mass concrete complete all as specified and as directed.
6M&L brick work with flyash bricks, straight or curved on plan exc 6 m mean using old size bricks , built in CM 1:6 complete all as specified and as directed.
7M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and as directed.
8M&L Brushing neat cement slurry with 3.0kg of cement per sq. metrecomplete all as specified and as directed.
9Rendering 15mm thick in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
10S&F plates(plain or chequered) channels, square cut or notched (ordinary and counter sunk) Fe-410-W(Gde-E-250) quality B forming holes without any attachment complete all as specified and directed
11S&F of steel structure/frame made of MS box/pipe sections ERW or induction butt weld tubes conforming to IS-1161-1979 grade st 240 as in columns,purlins and truss complete fitting as directed complete all as directed.
12S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.
13S&F Pre painted Galvalume aluminium zinc coating GI based plain sheet as in ridge / wall cladding steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.
14Preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
15M&L for preparation of new plastered wall surfaces and applying three coats of white wash on walls complete all as specified and as directed.
16Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as specified and directed.
17M&L Cement concrete tiles with grey cement no pigments 25cm x 25cm x 22mm/30 cmx30 cmx22 mm thick, ma c h i n e pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes. Conforming to IS.
18M&L Vitrified Ceramic light coloured tiles 9 to 10 mm thick area of each tile not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free 15 mmm thick screed bed or bedding layer in CM 1:6 as in base to floor finish.Note: Colour and finish /apperance shall be approved by GE
19M&L for preparing the surface of stone masonary/ concrete/Plastered surfaces which includes cleaning,sanding and filling any imperfections to create smooth dry base and applying primer to enhance adhesion and durability as per manufactures instructions and applying 2 coats of thin even coats exterior PU magnum/Aqua water proofing coating/ paint using spray gun ,brush or roller allowing each coat to dry completely on old surfaces complete all as specified and as directed by the Engineer-in-charge and as per manufacturers instructions
20S&F PVC (SWR) pipes single socketed with rubber ring jointed in any length fixed on walls of 110mm bore complete all as specified and as directed .
21S&F PVC (SWR) bend of any radius of 110mm bore complete all as specified and as directed .
22M&L for Sub main wiring with two runs of single core 4 Sqmm multi stranded copper conductor PVC insulated unsheathed, FRLS Cable, 1100 Volts grade and one run of 4 Sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non metalic ridig PVC conduit laid in floors not less than 25 mm dia conduit accessories complete all as specified and as directed. (colour code to be adopted for submainwiring) Note : Two runs of wire, one run of conduit and one run of earth conductor wire shall be measured as one unit length.
23M&L for Sub main wiring with two runs of single core 6 Sqmm multi stranded copper conductor PVC insulated unsheathed, FRLS Cable, 1100 Volts grade and one run of 6 Sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non metalic ridig PVC conduit laid in floors not less than 25 mm dia conduit accessories including taking out existingcomplete all as specified and as directed. Note : Two runs of wire, one run of conduit and one run of earth conductor wire shall be measured as one unit length.
24Supply and fix modular plates with frame and PVC/Metal box of 12 module complete all as specified and as directed
25M& L for point wiring complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade ISI marked with multi stranded copper conductor drawn through PVC conduit including accessories ISI marked including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS ISI marked as earth continuity conductor, fabricated Modular steel sunken terminal box duly painted made out of 1.60mm thick MS sheet concealed in walls, with brass/chromium plated screws and cup washers for housing Modular switches, socket outlets, fan regulators etc, all as specified and as directed for One light Point controlled by one way switch
26All as per Ser item No 25 above but for One Ceiling /Exhaust Fan Point controlled by one one way switch.
27All as per Ser item No 25 above but for 5 amps socket point on independent board.
28All as per Ser item No 25 above but with 2.5 sqmm cable for 15 Amps socket outlet on independent board with 2.5 Sqmm earth continuty wire complete all as specified and directed.
29All as per Ser item No 25 above but with 4 sqmm cable for 20/25 Amps socket outlet on independent board with 4 Sqmm earth continuty wire complete all as specified and directed.
30Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body.
31Supply and fix switch modular type, 6 Amps 240 volts single pole one way.
32Supply and fix socket outlet, 5 pin 6 Amps, Modular type.
33Supply and fix stepped type fan regulator electronic modular type, 2 module , 240 Volt.
34Supply and fix MCB protected POWER UNIT single pole and neutral with one 25 amps socket, (incl 3 Pin Plug Top) including MCB 25 Amps rating with six module plate and flush metal GI box and electrically connecting up complete all as specified and directed.
35Supply and fix 20 watt intregated LED tube light fitting 4 ft , suitable for single phase 230 Volts, 50 Hz AC supply and mounted on wall or ceiling, complete with all accessories internally prewired and including electrically connection with copper conductor cable of size 0.5 Sqmm (nominal area)all as specified.
36Supply and fix SP&N DBs, double door, 240 volt, 8 way complete all as specified and directed.
37M&L for MCB single pole, 240 volts, 6 - 32 Amps, 10 KA C Curve
38M&L for MCB single pole & neutral 240 volts 32Amps C curve.
39Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5M in depth for taking out / for laying under ground pipes etc and getting out in soft/loose soil.
40Returning filling in incl spreading levelling,watering and well ramming in layers n-exc 25 cms in hard/dense soil
41Removal of excavated material to a distance not exc. 50 mtr away from starting point and depositing where directed at a level not exc. 1.5 mtr above starting point complete all as specified and as directed.
42Supply and laying GI tubing medium grade ISI marked with all fittings fixed complete to walls and ceiling or laid in floors incl. making good of disturbed surfaces and complete all as specified and as directed for the following sizes :- Make:TATA / JINDAL / PRAKASH.
4320 MM
4425 MM
4540 MM
46Supply & fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed and seating on iron pipe line and fixed properly of following sizes including taking out unserviceable gun metal gate / ball valve:-Make: Zoloto / Leader / Tiger / Cresent.
4720 mm
4825 mm
4940 mm
50M&L for providing PCC Type D-2, 1:4:8 using 40 mm stone aggregate in the base of path complete all as directed.
51M&L for providing PCC 1:3:6, Type C1 mix using 20 mm stone aggregate as in path complete all as directed.
52Material and labour for cutting road/hard standing not exc. 0.60 mtr wide and not exc. 0.25 mtr deep for laying and taking out water pipe line including making good the disturbed portion as per existing with cement mortar complete all as specified and as directed. Please Enable Macros to View BoQ information
53Material and labour for cutting road/hard standing not exc. 0.60 mtr wide and not exc. 0.25 mtr deep for laying and taking out water pipe line including making good the disturbed portion as per existing with cement mortar complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57340844
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 17.80 Lakhs
LAST DATE 24-09-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Providing Of Shed And Tiling For Orc And Certain E/M Minor Works At Afs Begumpet Under Ge (Af) Hakimpet(Tender Id No. 2026_Mes_787630_1)
Basic Detail
Tender No 8104/E8
Bidding Type Tender
Location
City Hyderabad
State Telangana
Key Dates
Publish Date 16 Sep 2026
Submission Date 24 Sep 2026
Open Date 01 Jan 0001
Finance
Tender Value 17.80 Lakhs
Tender Fee 500
EMD 35600
Exemption Available
Document List
8104ps.pdf
BOQ_882767.xls
Tendernotice_1 (8).pdf
21b8ec13-9ac8-438a-b88c-c252cebc2390.html
8104nit.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 24, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 2 days
Sep 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
pdf

8104ps.pdf

xls

BOQ_882767.xls

pdf

Tendernotice_1 (8).pdf

html

21b8ec13-9ac8-438a-b88c-c252cebc2390.html

pdf

8104nit.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders