Tender For Special Repair To Bldg No T-10 (Stores) Of 172 Fd Regt Under Ge Gwalior..
Tender Value
38.80 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
3 days left
EMD
77616
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-10 (Stores) Of 172 Fd Regt Under Ge Gwalior..
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Sep-2026 | Date Corrigendum | Date | 29-Sep-2026 |
| 2 | 29-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 2 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick in each layer, spread, levelled and rammed including watering complete all as specified and directed. |
| 3 | M&L for 100mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate), as in sub base of floor complete all as specified and as directed. |
| 4 | M&L for 75mm thick plain Cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 5 | M&L for mirror pre-polished kota stone slab 15-16 mm thick, as in flooring, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and including 20 mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and as directed. |
| 6 | M&L for machine cut kota stone slab 15-16mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 7 | M&L for 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for laying floor finishes complete all as specified and directed |
| 8 | M&L for chequered cement concrete tiles of size 250mm x 250mmx 20 to 22mm thick (ISI marked) of approved colour, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as specified and directed. |
| 9 | M&L 75 mm thick PCC 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in plinth protection, PCC will be laid with 12 mm gap & the gap will be filled up with bituminous joint filler type A complete all as specified and as directed. |
| 10 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 11 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement plaster 1:6, finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 12 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement plaster 1:4 and mixed with WPC, finished even and smooth (without using extra lime or cement) complete all as specified and directed. (Note:- WPC shall be measured & paid seperately). |
| 13 | Supply only liquid water proofing compound complete all as specified and directed. |
| 14 | M & L for Washed stone grit plaster on exterior walls in two layers, (i) under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, (ii) top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern and colour including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) complete as per specifications and direction. |
| 15 | M & L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction. |
| 16 | M&L for Complete removal of existing treatments using eco-friendly chemical strippers or steam cleaners. Treat mold/moss areas with a biocidal wash. Apply 1.5 mm thickness of Acrylic-based wall putty to achieve a level surface applying two coats of distemper oil emulsion on new surfaces by using rollers over a coat of primer of same make suitable for distemper oil emulsion complete all as specified and directed. |
| 17 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 18 | Providing and applying 1 mm thick wall care putty over plastered surface to prepare the surface even and smooth complete all as specified and as directed. |
| 19 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 20 | M&L for Brickwork with subclass 'B' bricks old size brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 21 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) size n.exc 1.50 Sqm each complete all as specified and directed. |
| 22 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) size exc 1.50 Sqm but n exc 4 sqm each complete all as specified and directed. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 24 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type/ laminated flush door shutter (single or double leaf) of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 25 | S&F for 150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 26 | S&F for extruded aluminium alloy handles 125 mm, fabricated type, anodised complete all as specified and directed. |
| 27 | S&F for 75mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 28 | M&L for 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 29 | S&F Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with and including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded making a good complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item. |
| 30 | S&F for 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square size not exceeding 0.5 Sqm in each pan complete all as specified and directed. |
| 31 | S&F for galvanised mild steel wire cloth 0.46 nominal dia of wires and average width of aprature 1.18mm and fixed with tinned tacks galvanised wire staples fixed including a coat of french blue paints complete all as specified and directed. |
| 32 | M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 33 | Demolition of cement concrete (un reinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specifeid and directed |
| 34 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base for floor, finished even and rough complete all as specified and directed. |
| 35 | M&L for 50mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed |
| 36 | M&L for 60 mm thickness rubber moulded machine pressed precast concrete interlocking paver block M-35 any shape and size, confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed. |
| 37 | Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed. |
| 38 | S&F 0.50 mm thick pre -painted galvatume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified colour as approved by Engr -in -Charge complete all as specified and directed. |
| 39 | S&F 0.50 mm thick pre -painted galvatume aluminium zinc coating GI based plain steel sheet of any colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as in ridge specified, colour as approved by Engr - in - Charge complete all as specified and directed. |
| 40 | Dismantling framed trusses not exceeding 10m span and refixing of the same complete all as specified and directed. |
| 41 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 42 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410W (Gde-250) quality complete all as specified and directed. |
| 43 | Dismentling of wall and ceiling board or insulation board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillet complete all as specified and directed. |
| 44 | M&L Providing & fixing false ceiling at all heights with 12 mm thick fully perforated micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of Sleek texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners/ wire, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. Main ‘T’ runner to be suspended from ceiling using GI soffit cleats/by using dash fastners to RCC lintel or slabs/ by welding MS cleats of suitable size on truss/purlin/rafters” GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along at all heights as per directions complete all as specified and directed. |
| 45 | S&F in repair Curtain rod stainless steel decorative type 20-25 mm dia including fixing bracket and end knobs complete all as specified and directed. |
| 46 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 47 | Taking down ceiling fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including renewal of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed. |
| 48 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 49 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed. |
| 50 | Taking down unserviceable TPN DB with MCB's of any make/capacity, complete, all as specified and directed. |
| 51 | M&L concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete all as specified and directed. |
| 52 | One light point controlled by one switch. |
| 53 | One Ceiling fan point controlled by one switch. |
| 54 | One Exhaust fan point controlled by one switch. |
| 55 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 56 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 57 | Description all as per above item No 51 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed. |
| 58 | S&F Modular switch 1 way 6 A,1 module complete all as specified and directed. |
| 59 | S&F Modular Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed. |
| 60 | S&F Modular switch 1 way 16 A,1 module complete all as specified and directed. |
| 61 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 62 | S&F Modular ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 63 | S&F Modular Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed. |
| 64 | S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed. |
| 65 | S&F LED Lamp 09/10 watt complete all as specified and directed. |
| 66 | S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 4000 to 6500K fitting incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 67 | S & F LED of 30 watt security light fittings better optics for uniform distribution IP 65 protection inbuilt photometric sensor, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60 mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. Please Enable Macros to View BoQ information |
| 68 | S & F LED of 30 watt security light fittings better optics for uniform distribution IP 65 protection inbuilt photometric sensor, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60 mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 06, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender