Tender For Comprehensive Maintenance Of Tiling, Roofing, Flooring, Paneling, Ceiling, Joinery And Allied Works In Md And Otm Accn At 8Fbsu, Af
Tender Value
25 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
12 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
udhampur → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance Of Tiling, Roofing, Flooring, Paneling, Ceiling, Joinery And Allied Works In Md And Otm Accn At 8Fbsu, Af
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete to ground floor (unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed. |
| 2 | M&L for cement concrete 1:3:6 type C-2 (40mm graded crushed stone aggregate) 75 mm thick for sub-base in sub floor sub base, floor and paving etc cement complete all as specified and directed. |
| 3 | M&L for PCC 25mm thick 1:2:4 type B1 (Using 12.5mm graded crushed stone aggregates) as in sub flooring , complete all specified and directed. |
| 4 | Demolition for floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all specified and directed. |
| 5 | M&L coloured/printed non skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.18 sqm but not exc 0.38 sqm, laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge. |
| 6 | All as per sr No 5.00 above but on vertical surfaces such as skirting including 9 to 10mm thick rendering in cement mortar 1:3 rough finish to receive the tiles complete all as specified and directed. |
| 7 | M&L coloured/printed non skid ceramic tiles 7 mm thick (square/rectangular) area of each tile exc 0.11 but not exc 0.16 Sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed. |
| 8 | All as per sr No 7.00 above but on vertical surfaces such as skirting including 7 to 8 mm thick rendering in cement mortar 1:3 rough finish to receive the tiles complete all as specified and directed. |
| 9 | M&L coloured/ printed non skid ceramic tiles 7 mm thick (square/ rectangular) area of each tile exc 0.06 but not exc 0.11 Sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed. |
| 10 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 450X 350X 7mm/450x300x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 11 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid beded and pointed in any mortar |
| 12 | M&L for 18-20mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment, complete all specified and directed. |
| 13 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed. |
| 14 | Demolition of stone/brick masonry built in cement mortar including quoins, arches, etc but exceeding ashlar facing dressed stone Work etc complete all as specified and directed. |
| 15 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6, complete all as specified and directed. |
| 16 | M&L brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan to radius half brick wall built in cement mortar (1:4), complete all as specified and directed. |
| 17 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed. |
| 18 | M&L Rendering cement plaster 15mm thick in cement mortar 1:6 on other than fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 19 | M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on wall surfaces, finishing the surface even and smooth without using extra Cement complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for preparation of new plastered surface on walls and applying two coats of oil bound distemper over a coat of wall care putty for making surface smooth on plastered surfaces complete all as specified and directed by Engineer-in-Charge. |
| 21 | Preparing new plastered or un-plastered surfaces of walls and applying two coats Acrylic exterior emulsion paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) over a coat of acrylic primer complete all as specified and directed. |
| 22 | Dismantling of timber scantlings exc 40 Sq-cm in section as in fillets, rails, posts, rafters, purlins, etc all as specified and directed by Engineer-in-Charge. |
| 23 | Dismantling of timber scantlings less than 40 sq. cm in section as in fillets, rails, posts, rafters, purlins, etc all as specified and directed by Engineer-in-Charge |
| 24 | Dismantling of structure steel work including doors, gates but excluding framed truss etc, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Framed work as in false ceiling, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 A quality grade, all as specified and directed. |
| 26 | Prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in false ceiling fixed to Mild steel/ timber frame, complete all as specified. |
| 27 | Cutting holes exc. half brick but not exc one brick in brick walls built in cement mortar or cement lime mortar & stone walls built in lime mortar for inserting hold fasts & making good dismantled portion in mortar (1:3) or PCC(1:2:4) Type B-1 as required |
| 28 | S&F Roof trusses (framed), trussed, posts, struts, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, base plate and gusset plates etc confirming to Fe 410 -W (Gde-E- 250) quality-A, complete all as specified and directed. |
| 29 | S&F PVC Sheet Wall Panelling of thickness 5mm consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed. Note- 1. Including all necessary fittings and scaffolding for heighted site. 2. Sample of Wall Panelling must be produced before GE/ Engr-in-Charge/ User before incorporating into the works. |
| 30 | Taking down Chowkhats of frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed by Engineer-in-Charge. |
| 31 | Taking Down Chowkhats of area but exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed by Engineer-in-Charge. |
| 32 | Taking down shutters of any description area not exc 1.00 Sqm each complete all as specified and directed by Engineer-in-Charge. |
| 33 | Taking down shutters of any description area exc 1.00 sqm and not exc 2..00 Sqm each complete all as specified and directed by Engineer-in-Charge. |
| 34 | Welding in repairs of old/broken steel windows/door shutter exc 2.50 cm but n. Exc. 5.00 cm in length and thickness of metal exc 6mm but n.exc 9 mm complete all as specified. |
| 35 | S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheets all as per specification & drawing. |
| 36 | S&F of factory Made Solid panel PVC door shutter, 28 to 30mm thick (stiles) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing. |
| 37 | S&F of 2nd class hard wood 30mm to 35mm thick glazed and skeleton shutters for doors, open rebated and prepared to receive glass or gauge etc (without sash bars) edges of framing plain chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed. |
| 38 | S&F of 2nd class hard wood 30mm to 35mm thick, plain framed, panelled door shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats all as specified & directed. |
| 39 | S&F of 2nd class hard wood 30mm thick glazed & skeleton shutters for windows , open rebated & prepared to receive glass/gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc size of member of shutters as specified in SSR part-1 sec 8 clause 8.24(b) supplied and fitted to chowkats all as specified. |
| 40 | S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 41 | S&F of 2nd class hard wood Plain solid straight chowkhats of wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including tarring back of surface in contact with walls all as specified & directed. |
| 42 | Supply and fixing Butt hinges, (ISI Marked), medium weight, cold rolled, mild steel, of size 100mm long complete all as specified & directed by Engineer-in-Charge. |
| 43 | Supply and fixing Butt hinges, (ISI Marked), medium weight, cold rolled, mild steel, of size 75 mm long complete all as specified & directed by Engineer-in-Charge. |
| 44 | S&F Aluminium anodised, barrel tower bolts of size 200mm extruded section and fixed complete all as specified & directed by Engineer-in-Charge. |
| 45 | S&F Aluminium anodised, barrel tower bolts of size 150mm extruded section and fixed complete all as specified & directed by Engineer-in-Charge. |
| 46 | Supply and fixing in repair door seal 1.5mm thick strip of mild steel with hard brush fixed in door bottom complete all as specified and directed by Engineer-in-Charge. Note: Sample must produced prior to incorporate into the works. 2. Width of Door Seal without brush should not be less than 25mm. |
| 47 | Supply and fixing floor door stopper of aluminium alloy of overall length of cover plate 140mmm and tongue, anodised, with hard drawn steel spring, fixed on door complete all as specified & directed by Engineer-in-Charge. |
| 48 | Aluminium alloy, anodised, sliding door bolt(ISI Marked) 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F Aluminium handles, cast type, anodised of size 150 mm complete all as specified & directed by Engineer-in-Charge |
| 50 | S&F Aluminium handles, cast type, anodised of size 125 mm complete all as specified & directed by Engineer-in-Charge. |
| 51 | S&F of mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete, fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F for 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door/windows stops and the like, including all necessary' labours; articles n exc 200 cu. cm each including butt hinges, size 50 mm, medium weight, cold rolled mild steel, and fixed complete all as specified. |
| 53 | S&F Factory made Steel windows or ventilators side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete, with glazing bars, dovetailed or welded type of 'Z' Section comprising double frame for gauged and glazed Skelton shutter jointed internally with flat iron 40x4 mm complete all as specified and directed by Engr-in-Charge. |
| 54 | Preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed by Engineer-in-Charge. |
| 55 | M&L 2nd class soft wood clean sawn timber framed and fixed in frame work for ceiling etc complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F 6mm thick of plywood, grade BWP, type BB fixed with screw to mild steel frame work and No of ply 5 as in ceiling all as specified and directed by Engineer-in-Charge. |
| 57 | M&L for 2nd class softwood for plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads of section exc 6 Sqcm but n exc 13 Sqcm complete all as specified and directed by Engineer-in-Charge. |
| 58 | Dismantling boarding, any description fixed in any position with nails or screws complete all as specified and directed by Engineer-in-Charge. |
| 59 | Dismantling of plain or corrugated steel sheeting of any gauge, thickness etc in roof coverings/cladding/eave etc complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade 'B' Class 8 complete all as specified and directed by Engineer-in-Charge. |
| 61 | Taking down and Refixing Plain or corrugated steel sheeting, any gauge, thickness, roof coverings with two corrugation side lap fixed with L' type or 'J' type or cranked hooked bolts and dome type bitumen washers complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F Galvanised plain mild steel sheeting 0.63mm thickness fixed with l or J type or cranked hook bolts with washers, in roofs as in ridge etc complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F 1.00mm thick Plain, galvanised, mild steel sheeting, in eave board & straight flashings (length & girth as fixed) with welded and soldered joint to be provided complete all as specified and directed by Engr-in-Charge. |
| 64 | Preparation of new painted surfaces of steel or iron work or CGI/PGI sheeting in walls or roofing over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) complete all as specified and directed. |
| 65 | Hacking out old broken glass (any thickness, size, quality or description)from wooden frames or stone, steel frames, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge. |
| 66 | 3mm thick sheet glass, ordinary type and glazing with oil putty or fixed with bead/glazing pins in squares size exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quality or description) all as specified and directed. |
| 67 | 3mm thick sheet glass, figured glass, pin head type and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quality or description) all as specified and directed. |
| 68 | S&F of galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples all as specified & directed. |
| 69 | S&F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F of door closer Cast Iron body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F Anodised aluminium frame for doors, windows and ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. |
| 72 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F anodised aluminium door shutters, aluminium section weighing 1.10 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by Engineer-in-Charge. |
| 74 | Taking down aluminium shutter n. exe 2 sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required complete all as specified and as directed.Note: Replaced of any item shall be paid and measured separately as supply and fix. |
| 75 | Taking down aluminium shutter exe 2 sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required complete all as specified and as directed.Note: Replaced of any item shall be paid and measured separately as supply and fix. |
| 76 | 4.8 mm thick sheet glass, ground or obscured or frosted/ tinted and glazing with oil putty or fixed with bead/glazing pins in squares of exe 0.5 sqm in each pane all as specified and directed. |
| 77 | M&L for 5mm thick ACP (Aluminium Composite Panel): Two thin aluminium skins bonded to a polyethylene or fire-retardant core; highly popular for lightweight, durable, and multi-coloured door panels. fixed with aluminium beading and rubber neoprene packing to aluminium frame complete all as specified and directed by Engineer-in-Charge. |
| 78 | S&F for rubber neoprene packing complete all as specified and as directed. |
| 79 | S&F for anodised aluminium snap on beading/tapper clip for fixing the glass or particle board complete all as specified and as directed. |
| 80 | S&F for 150 mm stainless steel butt hinges complete all as specified and as directed. |
| 81 | S&F in repair brass 4-levers Mortice lock, vertical type, size 100mm for aluminium door complete all as specified and as directed. |
| 82 | Note: An amount of Rs.84,750 on account of credit schedule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender