Tender for Augumentation of Lwss Pujyal Busal in Tehsil Nadaun Distt. Hamirpur hp. (sh:- c/o Pump House Room Size 4.00X3.00 Mtr. )
Tender Value
4.59 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
3 days left
EMD
9194
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augumentation of Lwss Pujyal Busal in Tehsil Nadaun Distt. Hamirpur hp. (sh:- c/o Pump House Room Size 4.00X3.00 Mtr. )
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited)saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposting of all surplus excavated earth as directed by the Engineer-in-charge in all leads and lifts. |
| 2 | Providing and laying cement concrete 1:6:12(Icement:6sand: 12 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts. |
| 3 | Brick work using common brunt clay building bricks (1st lass) in Foundation Plinth level upto floor two level in cement mortar 1:6(1Cement:6 Sand)in all leads and lifts. |
| 4 | Brick work using common brunt clay building bricks (1st lass) in super structure above Plinth level upto floor two level in cement mortar 1:6(1Cement:6 Sand)in all leads and lifts. |
| 5 | Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partions frames IN ALL leads and lifts |
| 6 | For door and window Frames. |
| 7 | For door and window Shutter |
| 8 | Providing and fixing glazing in aluminium door, window, ventilator shutters and 4.04 partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm. in all leads and lifts. |
| 9 | Providing and fixing fly proof wire gauze to window clerestory window & dorrs 6.48 with M.S. Flat 15x3 mm and nuts & bolts complete. |
| 10 | Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain. |
| 11 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness. |
| 12 | Beams, cantilevers, girders & lintels, sides & soffits of beams, haunching, cantilevers, bressumers 1.00 mts. In depth in all heights from floor. |
| 13 | Edges of slab and breaking floors and walls under 20cms wide. |
| 14 | Providing and laying cement concrete work 1:2:4(1cement:2sand: 4 graded stone aggregatte 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 15 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams, griders bressumers and cantilevers upto all floor level. |
| 16 | Providing Tor steel reinforcement for RCC work including bending, binding & placing in position complete upto floor two level. |
| 17 | 20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar4 1:6(1cement:6sand) kin all leads and lifts. |
| 18 | 6 mm cement plaster to ceiling in CM 1:4 (1Cement :4 Sand) |
| 19 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth in all leads and lifts |
| 20 | Cement concrete flooring 1:2:4 (1cement;2sand: 4 graded stone aggregate 20mm nominal size) 40mm thick. |
| 21 | Providing and fixing of MS grill in windows and ventilators. |
| 22 | Providing and fixing following anodized aluminium. fittings of anodized transparent and shade with necessary screw etc.complete. |
| 23 | Sliding door bolts 250x16mm. |
| 24 | M.S. tower bolts (Barrel type) leads and lifts. |
| 25 | M.S. tower bolts (Barrel type) leads and lifts. |
| 26 | M.S. handles 125mm dia |
| 27 | M.S. handles 100mm dia |
| 28 | White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign-matter in all leads and lifts. |
| 29 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including priming caot with distemper primer of approved brand and manufacture. |
| 30 | Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregate 40mm nominal size will rammed and consolidated /and grouted with fine sand including prperation of ground. |
| 31 | Providing and fixing M.S.fan clamp (Type-1 of 16mm dial M.S. Bar bent to shape 1.00 with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender