Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #57336251

Tender For Repair And Rewinding Of Submersible Pump Sets Under Phed Distt Dn Iii Jodhpur

Issued by Government Departments · Jodhpur, Rajasthan
Tender Value
40 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Repair And Rewinding Of Submersible Pump Sets Under Phed Distt Dn Iii Jodhpur

BOQ

Name of Work:- REPAIR AND REWINDING OF SUBMERSIBLE PUMP SETS UNDER PHED Distt Dn III Jodhpur
Sl. No. Item Description
1Repair Rewinding of Submersible motor includes full servicing and rewinding (wherever required) as per manufacturer's specification and to the satisfaction of Engineer Incharge. It includes the replacement of minor parts such as bushes (oil seal bush) Nut Bolts, washers, cable seal, gland ring, vent plug, water drain plug, etc. complete job
2Up to 3 HP V-6
3Above 3HP to 5 HP V-6
4Above 5HP to 7.5 HP V-6
5Above 7-5 HP to 10 HP V-6
6Above 10 HP to 12.5 HP
7Above 12.5 HP to 15 HP
8Above 15 HP to 17.5 HP
9Above 17.5 HP to 20 HP
10Motor opening cable jointing & refitting charges when rewinding is not required.
11Particulars of spare parts of submersible Motor
12Providing & Replacement of G.M./S.S. Bushes for all types of motors (per set of 4Nos.) including cost of sleeves
13Providing & Replacement of thrust bearing for all types of motor. It includes cost of all components connected with thrust bearing.
14Replacement of thrust plate for all types of motors
15Supply and fixing spare parts for repair of pump set including cost of opening refitting, servicing, and machining, if required. It also includes the cost of nut bolt, studs, washer packing, keys etc. complete.
16Providing & fixing of GM neck rings parts on impeller.
17Plain Type V-6
18Bowel typeV-6
19Plain Type V-8
20Bowel typeV-8
21Providing & Fixing of GM/SS bush per piece
22Plain Type V-6
23Bowel typeV-6
24Plain Type V-8
25Bowel typeV-8
26Providing & replacement of G.M. Impeller
27Plain Type V-6
28Bowel typeV-6
29Plain Type V-8
30Bowel typeV-8
31Providing & replacement of Nylon Impeller
32Plain Type V-6
33Bowel typeV-6
34Plain Type V-8
35Bowel typeV-8
36Providing & fixing CI Diffuser/ guide vans per piece
37Providing & fixing Gun metal Diffuser/ guide vans per piece
38Providing & fixing Nylon Diffuser/ guide vans per piece
39Providing & fixing Microlone Guide per piece
40Providing & fixing of CI body per piece
41Plain Type V-6
42Bowel typeV-6
43Plain Type V-8
44Bowel typeV-8
45Pump opening & fixing including machining & all finishing work for desired performance
46Plain Type V-6
47Bowel typeV-6
48Plain Type V-8
49Bowel typeV-8
50Impeller welding & turning (if not replaced)
51Plain Type V-6
52Bowel typeV-6
53Plain Type V-8
54Bowel typeV-8
55Rewinding of three phase squirrel cage induction motor of Monoblock pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge.
563 H.P.
575 H.P.
587.5 HP
5910.00 HP
6012.5 HP
6115.00 HP
6217.50 HP
6320.00 HP
64SUPPLY & FIXING OF SPARE PARTS FOR MONOBLOCK PUMPSET (MOTOR + PUMP)
65Connection Plates
66up to 10 HP
6710 HP to 20 HP
68Cooling Fan
69up to 10 HP
7010 HP to 20 HP
71GM/SS bush
72Upto 10 HP
7310 HP to 20 HP
74Mechanical reconditioning of Bearing sheet
75Upto 10 HP
7610 HP to 20 HP
77Mechanical reconditioning ofImpeller sheet and Key way slot
78Upto 10 HP
7910 HP to 20 HP
80Oil seal
81Upto 10 HP
8210 HP to 20 HP
83Labour charge for opening and fitting of pump sets
84Upto 10 HP
8510 HP to 20 HP
86Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (including cost of copper wire) 'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump sets and transportation to and fro from installation site complete as per direction of engineer in charge at site.
87Above 15.00 HP but upto 17.50 HP
88Above 17.50 HP but upto 20.00 HP
89Above 20.00 HP but upto 25.00 HP
90Above 25.00 HP but upto 30.00 HP
91Above 30.00 HP but upto 35.00 HP
92Above 35.00 HP but upto 40.00 HP
93Above 40.00 HP but upto 45.00 HP
94Above 45.00 HP but upto 50.00 HP
95Above 50.00 HP but upto 60.00 HP
96Above 60.00 HP but upto 75.00 HP
97Above 75.00 HP but upto 100.00 HP
98SUPPLY & FIXING OF SPARE PARTS HSC PUMP SETS (MOTOR + PUMP)
99Connection Plates
1005 HP to 20 HP
10120 HP to 30 HP
10230 HP to 50 HP
103Above 50 HP to 100 HP
104Cooling Fan
1055 HP to 20 HP
10620 HP to 30 HP
10730 HP to 50 HP
108Above 50 HP to 100 HP
109Fan Cover
1105 HP to 20 HP
11120 HP to 30 HP
11230 HP to 50 HP
113Above 50 HP to 100 HP
114G.M./SS Gland Guide Bush
1155 HP to 20 HP
11620 HP to 30 HP
11730 HP to 50 HP
118Above 50 HP to 100 HP
119Shaft with Sleeve Chuck Nut
1205 HP to 20 HP
12120 HP to 30 HP
12230 HP to 50 HP
123Above 50 HP to 275 HP
124Shaft Chuck Nut
1255 HP to 20 HP
12620 HP to 30 HP
12730 HP to 50 HP
128Above 50 HP to 275 HP
129G.M. Neck Ring
1305 HP to 20 HP
13120 HP to 30 HP
13230 HP to 50 HP
133Above 50 HP to 100 HP
134Bush Shaft Sleeve of G.M.
1355 HP to 20 HP
13620 HP to 30 HP
13730 HP to 50 HP
138Above 50 HP to 100 HP
139G.M. Gland Cover
1405 HP to 20 HP
14120 HP to 30 HP
14230 HP to 50 HP
143Above 50 HP to 100 HP
144S.S. Shaft (Non Magnetic)
1455 HP to 20 HP
14620 HP to 30 HP
14730 HP to 50 HP
148Above 50 HP to 100 HP
149G.M. Shaft Sleeve Check Nut
1505 HP to 20 HP
15120 HP to 30 HP
15230 HP to 50 HP
153Above 50 HP to 100 HP
154M.S. Shaft Check Nut
1555 HP to 20 HP
15620 HP to 30 HP
15730 HP to 50 HP
158Above 50 HP to 100 HP
159Cooling pipe set with nozzle & Nut
1605 HP to 20 HP
16120 HP to 30 HP
16230 HP to 50 HP
163Above 50 HP to 100 HP
164AIR Cock
1655 HP to 20 HP
16620 HP to 30 HP
16730 HP to 50 HP
168Above 50 HP to 100 HP
169JOB WORK FOR REPAIR OF PUMP MOTOR
170Bearing Housing (rebuilding, turning & finishing)
1715 HP to 20 HP
17220 HP to 30 HP
17330 HP to 50 HP
174Above 50 HP to 100 HP
175Bearing Cap (rebuilding, turning & finishing)
1765 HP to 20 HP
17720 HP to 30 HP
17830 HP to 50 HP
179Above 50 HP to 100 HP
180Impeller Reconditioning for all type of Pump
1815 HP to 20 HP
18220 HP to 30 HP
18330 HP to 50 HP
184Above 50 HP to 100 HP
185Labour Charges for Dismantling & Assembling of Pump
1865 HP to 20 HP
18720 HP to 30 HP
18830 HP to 50 HP
189Above 50 HP to 100 HP
190Coupling with stud and rubber bush
1915 HP to 20 HP
19220 HP to 30 HP
19330 HP to 50 HP
194Above 50 HP to 100 HP
195Supply & Fixing of tyre coupling sets according to relevant IS code in Centrifugal couple pump sets of approved make Unit. This job also included re-alignment of centrifugal couple pump set after fixing of tyre coupling set as per directed by Engineer-in charge.
196Type 14 Nos. set
197Type 15 Nos. set
198Type 16 Nos. set
199Type 17 Nos. set
200Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification and approved make by EIC.
2016304 or equivalent size
2026305 or equivalent size
2036306 or equivalent size
2046307 or equivalent size
2056308 or equivalent size
2066309 or equivalent size
2076310 or equivalent size
2086311 or equivalent size
2096312 or equivalent size
2106316 or equivalent size
2116317 or equivalent size
2126318 or equivalent size
2136319 or equivalent size
214NU319C or equivalent size
215Suuplying of super enamal copper wire suitable for rewindind of induction motor (only procured for motor rewinding) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57336251
AUTHORITY Government Departments
TENDER VALUE 40 Lakhs
LAST DATE 15-09-2026
Authority
Authority Name Public Health Engineering Department
Work Description Tender for Repair And Rewinding Of Submersible Pump Sets Under Phed Distt Dn Iii Jodhpur
Basic Detail
Tender No SE/PHED/Distt. Cr./JU/57/2026-27
Bidding Type Tender
Location
City Jodhpur
State Rajasthan
Key Dates
Publish Date 03 Sep 2026
Submission Date 15 Sep 2026
Open Date 16 Sep 2026
Finance
Tender Value 40 Lakhs
Tender Fee 2000
EMD 80000
Exemption Available
Document List
21d7083a-3d89-4b14-9813-c4abb1f8a9b2.html
BOQ_1055201.xls
TD.pdf
Tendernotice_1 (70).pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 15, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Today

Tender Documents

Download All (ZIP) ↓
html

21d7083a-3d89-4b14-9813-c4abb1f8a9b2.html

xls

BOQ_1055201.xls

pdf

TD.pdf

pdf

Tendernotice_1 (70).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders