Tender For Completion Of Remaining Works Of School In Distt.Shimla H.P.(Sh:-Construction Of One Room & Renovation Of Class Rooms At Gps Dhhalli, Block Mashobra, Distt.Shimla H.P And Addition & Renovation Of Class Room At Govt. Primary School Old Jung
Tender Value
10.54 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
0 days left
EMD
21090
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Completion Of Remaining Works Of School In Distt.Shimla H.P.(Sh:-Construction Of One Room & Renovation Of Class Rooms At Gps Dhhalli, Block Mashobra, Distt.Shimla H.P And Addition & Renovation Of Class Room At Govt. Primary School Old Junga, Block Mashobra, Distt. Shimla, H.P).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering i/c carriage of material in all leads and lifts. 1:5:10 (1 cement : 5 coarse sand): 10graded stone aggregate 40 mm nominal size) All work up to plith level |
| 2 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth i/c carriage of material in all leads and lifts. |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete i/c carriage of material in all leads and lifts. |
| 4 | Suspended floors, roofs, landings, balconies and access platform |
| 5 | Lintels, beams,plinth beams, girders, bressumers and cantilevers. |
| 6 | Stair case excluding landing |
| 7 | Edges of slabs and breaks in floors and walls, under 20Cm wide |
| 8 | Weather shade, Chajjas, corbels etc., including edges |
| 9 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge.“( Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) i/c carriage of material in all leads and lifts. All works above plinth level upto all floor level |
| 10 | Steel reinforcement for R.C.C work including straightening, cutting,bending, placing in position and binding all complete upto plinth level/above plinth level. TMT bars of grade Fe-500D or more i/c carriage of material in all leads and lifts. |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) i/c carriage of material in all leads and lifts. |
| 12 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws i/c carriage of material in all leads and lifts. |
| 13 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 Part I) decorative type, core of block board construction with frame of 1stclass hard wood and well matched teak 3 ply veneering with vertical grains orcross bands and face veneers on both faces of shutters i/c carriage of material in all leads and lift.35 mm thick both side laminated board including ISI marked Stainless Steel butt hinges with necessary screws i/c carriage of material in all leads and lifts. |
| 14 | Providing and fixing stainless steel sliding door bolts of required color and shade with bolts and nuts, screws etc complete including carriage of material in all leads and lifts. 300x16 mm |
| 15 | Providing and fixing stainless steel Tower bolts of required color and shade with bolts and nuts, screws etc complete including carriage of material in all leads and lifts. 200X10 mm |
| 16 | Providing and fixing stainless steel handles to required colour and shade with necessary screws, etc. complete including carriage of material in all leads and lifts. 125 mm |
| 17 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required i/c carriage of material in all leads and lifts. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 18 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer including carriage of materialin all leads and lifts.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) i/c carriage of material in all leads and lifts. |
| 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete i/c carriage of material in all leads and lifts. Size of tile 600X600 mm |
| 20 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. i/c carriage of material in all leads and lifts. Size of tile 600X600 mm |
| 21 | Kota Stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab , including rubbing and polishing complete with base of cement of mortar 1:4 (1 cement :4 coarse sand)i/c carriage of material in all leads and lifts. 25 mm thick |
| 22 | Kota Stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement of mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, inlcuding rubbing and polishing complete including carriage of material in all leads and lifts. |
| 23 | 15 mm cement plaster on rough side of single or half brick wall of mix upto all heights/depths in mement Mortor 1:6 (1 cement: 6 coarse sand).i/c carriage of material in all leads & lifts. |
| 24 | 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) upto all heights i/c carriage of material in all leads & lifts. |
| 25 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) upto any height /Depth i/c carriage of material in all leads & lifts. |
| 26 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material in all leads & lifts. |
| 27 | Finishing with Delux Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications including carriage of material in all leads & lifts. Painting wood work with Delux Multi surface paint of required shade. Two or more more coat applied @0.90 ltr/10 Sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufature |
| 28 | Finishing with Delux Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications including carriage of material in all leads & lifts. Painting steel work with Delux Multi surface paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.80ltr/10 sqm of approved brand and manufacturer. |
| 29 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including carriage of material in all leads & lifts. |
| 30 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads & lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender