Tender For General-Sagarmala- Creation Of Berthing And Land Side Facilities At Munakkakadavu Fishing Harbour Of Kadappuram Panchayath In Guruvayur Lac.-Construction Of Berthing Jetty On The Northern Side Of Munakkakadavu Fishing Harbour-General Civil
Tender Value
1.68 Crore
Estimated cost
Bid Submission
17 Sep 2026
10 days left
EMD
50000
Bank guarantee accepted
Document Fee
5515
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thrissur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Sagarmala- Creation Of Berthing And Land Side Facilities At Munakkakadavu Fishing Harbour Of Kadappuram Panchayath In Guruvayur Lac.-Construction Of Berthing Jetty On The Northern Side Of Munakkakadavu Fishing Harbour-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Berthing Jetty (Sub structure )) |
| 2 | 12.22:Providing Steel Liner 10mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawing. |
| 3 | OD2316/2026-2027:Driving down 700mm dia. M.S liner already fabricated to the required depth including all hire charges of machineries, labour charges etc. complete.(Based on TS no.39/18-19) |
| 4 | OD2320/2026-2027: Supply, Fitting and Placing in position reinforcement in cages using HCR bar Reinforcement including cost of materials, labour charges, conveyance and placing the cages in bore holes providing precast cover blocks etc, complete as per Drawing and Technical Specifications and as directed by Engineer in charge. Unit = 1 MT Taking output = 1 MT) Based on Morth minor bridge data spec 12.40 |
| 5 | OD3741/2026-2027:Bored cast insitu M40 grade plie using batching plant, transit mixer and concrete pump excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000m. pile diameter - 700mm, including protective bunds, platform, driving down etc. |
| 6 | OD2318/2026-2027:Extra for addition of synthetic polyester triangular fibre of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in reinforced cement concrete retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer -incharge |
| 7 | OD2321/2026-2027: Supplying, fitting and placing reinforcement using HCR for the RCC works for super structure including conveying, straightening, cutting, bending and tying in position etc. complete as per & drawing and technical specifications and the direction of engineer in charge Based on 14.2 Taking output = 1 MT Based on Morth minor data spec 14.2 |
| 8 | 14.1D.1.2.A:\\"Furnishing and Placing RCC/PSC Grade M35 Using Concrete Mixer as per drawing and Technical Specification. For T-beam & slab - Height upto 5m |
| 9 | 14.24:Providing and laying of a modular strip box seal expansion joint catering to a horizontal movement beyond 140 mm and upto 210 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer /supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. |
| 10 | OD2317/2026-2027:Providing Wearing coat on deck slab by adding extra materials of light quantity of abrasion resistant to confirm IS-1237(like Nito floor hard top) at 3 kg/m2 sprinkled in uniform over the concrete including floating hard and trowelled smooth to get a uniform hard surface and providing wiremesh impression and making necessary grooves for various joints including all cost of material, labour, hire charges etc. complete.(based on Approved data for 150m cargo berth at Beypore) |
| 11 | Construction of Berthing Jetty |
| 12 | OD2311/2026-2027: Supplying and fixing 80 cm or nearest available size used tyre as fender for the Wharf at specified & locations using Nylone rope for tying the tyre and drillung holes for fixing and draining out water including cost and conveyance , labour charges etc. complete. (Based on EST NO:2019/467 ) |
| 13 | OD2315/2026-2027: Supplying and fixing cast iron bollards as per drawing including all cost of materials, labour charges, conveyance etc complete (Ref TS no.39/18-19) |
| 14 | OD2314/2026-2027: Supplying and fixing 600mm long 20mm dia foundation bolt with each nuts and washers fixing bollards including all cost, fixing charges etc. complete. (Sanctioned data of FHP Ponnani - Construction of Quay, Auction hall, and reclamation work) |
| 15 | OD2313/2026-2027: Drilling holes of concrete without disturbing the remaining portion for fixing GI bolts to the solid concrete of the quay to the required depth as per instructions of departmental officers at site including hire charges of machinery cost of labour charges etc. complete |
| 16 | 20.6.2.2:Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.Single pile above 50 tonne and upto 100 tonne capacityRoutine test (Test Load 1.5 times the Safe capacity) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender