Tender For Tender For Construction Of Waiting Hall For Ct/Mri Scan Block For Govt. Villupuram Medical College And Hospital.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Sep 2026
6 days left
EMD
25000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Villupuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For Construction Of Waiting Hall For Ct/Mri Scan Block For Govt. Villupuram Medical College And Hospital.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation (narrow) for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.0 to 2 m depth |
| 2 | Supplying and filling the basement with well gravel free from clay in layers not more than 15cm thick well rammed watered and consolidated complete complying with standard specification. |
| 3 | Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 4 | Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 5 | Cement concrete 1:3:6(one cement, three sand, six aggregate) using 20mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specfication. |
| 6 | Providing and laying in position , standardised concrete mix M-25 grade in accordance using 20mm with IS:456-2000 ,and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350kg/ms and maximum water cement ratio of 0.5, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate , retard setting of concrete , improve workability without impairing strength and durability with about 5 cu.m 7730 kg of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7676kg of sand but excluding cost of reinforcement grill and fabricating charges , centering and shuttering and also including laying , vibrating with mechanical vibrators, finishing , curing, etc. and providing fixtures like fan clamps in the RCC floor/roof slabes wherever necessary without claiming extra , etc complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No seperate payment will be made by the department for the excess usage of materials). |
| 7 | Foundation & basement(upto 1.5m below G.L and upto 1m above G.L) |
| 8 | Ground floor upto 4.5m |
| 9 | Brick work in Cement Mortar 1:5 using best quality of Second Class Ground Moulded Chamber Burnt Bricks of size 9\\" x 4-3/8\\" x 2-3/4\\" for foundation and basement including curing, etc., complete complying with standard specifiction. |
| 10 | Foundation and basement |
| 11 | Ground floor |
| 12 | Brick partition walls of 11.50mm thickness using best quality country bricks of size in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 13 | Supplying and erecting shuttering including necessary supports for plane surfaces such as RCC footings, plinth beam, staircase steps, RCC critical pier etc., complete in all floors. |
| 14 | Centering for soffits of RCC slabs of plane surface like lintels, beams, etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm x and B.G 10 stiffened with M.S angles of size 25 x 25 x 3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed by the Departmental Officers - (P & D) Data 38department officers. |
| 15 | For Rectangular beam slab waistslab landing slab etc. |
| 16 | For square or rectangular column sill slab, sunshade, fascia, fins, drops, etc |
| 17 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 18 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 19 | Special ceiling plastering and finishing all RCC exposed surfaces such as RCC slabs, sunshades, canopies, stair case stpes, landing slabs etc with C.M. 1:3 (One cement and three sand) 10 mm thick including hacking the surfaces necessary CM nosing, beading as per size specified wherever necessary using the same mix etc., complete complying with standard specification and as directed by the departmental oficers etc., complete |
| 20 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 21 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lamInstallation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 22 | Supplying fabricating and fixing in position of Aluminium colour anodised 1/2 panelled and 1/2 glazed door.The door frame shall be of colour anodised aluminium box type section of size 101.6x44.45x 3.18mm @ 2.319 Kg/m. The shutter frame shall be of aluminium anodised box type section of size 50x44.45x2.5mm @ 1.202 Kg/m for vertical styles & top rails. The Lock raills shall be using box type section of size 50x 44.45x2.5mm @ 1.292 Kg/m and bottom rail shall be box type section 100.40x44.45x2.5mm @ 1.974 Kg/m. The bottom portion of shutter shall be panelled with 12mm thick best quality both sides prelaminated MDF board. The top portion of the shutter shall be panelled with 5.5mm thick plain glass and rubber beading and Aluminium glazing clip of size 17.15x17.27x1.5 @ 0.176 Kg/m shall be used for fixing glass and 12 mm thick prelaminated MDF board with shutter and including fixing necessary furniture fittings such as Aluminium tower bolts, Lock, Aluminium door stopper with nylon bush, Aluminium hinges, floor spring and necesaary Aluminium angles, steel screws, plug etc. labour charges for fabrication & fixing and for dismantling RCC or masonry and redoing the same to the original conditions including charges for electric power consumption. |
| 23 | UPVC VentilatorSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 24 | Manufacturing, supplying and fixing M.S. grill for Windows and Gate shutter etc, including priming coat |
| 25 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 26 | Flooring with Self Designed colour ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 27 | Dadooing walls with approved best quality Ceramic tiles of size 300 x 600 x 10mm, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 28 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 29 | Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. |
| 30 | Supplying and fixing in position best approved quality of PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. (a).110mm dia. |
| 31 | Painting New Iron works for grills and steel balustrades etc. with two coats of approved quality and colour of synthetic enamel paint over existing priming coat etc. including scrapping and preparation of surface and cost of brush, scaffolding and complying with standard specification (The quality and colour of paint to be approved by EE before use on works). |
| 32 | Providing pre construction antitermite treatment using approved chemicals as per IS 6313 part 2 of 1981. The rate shall include all materials and labour for preparing the area for treatment, spraying antitermite chemical solution for foundation before laying foundation. Spraying of termicide (0.5%) concentrate solution to the grade beam level and brick masonry in in contact with back fill earth. Spraying termicide solution on sand for the flooring before laying the concrete. The treatment should be carried out on the sand filling in basement after leveling operation over making crow bar holes at 30cm intervals to a depth of 23cm in the outer periphery of the building on chemical poured inside the holes and closed after treatment. |
| 33 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 34 | Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm ( without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 35 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 36 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 37 | Supplying and fixing PVC Water Tank with all fittings including loading, unloading and lifting the tank to terrace and fixing properly to the existing GI lines without disturbing the masonry structures etc., complete complying with standard specification and as directed by the Departmental officers. |
| 38 | Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality of following dia including cutting, threading and fixing PVC specials using PVC adhesives including cost of all specials and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 39 | 20mm dia UPVC pipes |
| 40 | 25mm dia UPVC pipes |
| 41 | 32mm dia UVC pipes |
| 42 | Supplying and fixing in position best quality PVC soil waste pipes of various size having ISI mark and pressure of 6 Kg./Sq.cm providing leak proof joints with PVC adhesive etc. including fixing to the walls with necessary T.W. plugs, brass screws mild steel clamps etc. and giving connection to the sanitary fittings including dismantling brick masonry /RCC works / roof slab etc. wherever necessary and making good the dismantled portion to the original condition, complying with standard specifications etc. complete (The PVC pipe should be got approved by the Departmental Officer before use on works). |
| 43 | 75 mm dia PVC Pipe |
| 44 | 110 mm dia PVC Pipe |
| 45 | 160 mm dia PVC Pipe |
| 46 | Supplying and fixing in position 150x100mm square mouth P or S trap stone ware gully trap with cast iron grattings of size 150x150mm with c.I air tight cover with necessary earthwork excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150mm thick using 40mm size brick jelly including necessary brick work and plastering and giving connection to soil pipe etc., complete |
| 47 | Supply and fixing in position mirror of size 600x450mm of approved quality and brand of size with necessary plastic ,PVC frame with bottom stand of approved color with brass screw, rawal plugs etc., complete complying with standard specification and as directed by the Departmental officers. The quality of mirror should be got approved by the Excutive Engineer before use on work. |
| 48 | UPVC WindowSpecification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 49 | Supplying and fixing C.P screw down tap 15mm dia.including cost of shellac,thread ball etc., |
| 50 | Supply and fixing in position gun metal wheel valve with ISI including cost of shellac, thread etc, including labour for cutting and threading. |
| 51 | 25mm dia.Wheel valve |
| 52 | 32mm dia.Wheel valve |
| 53 | Supplyimg and fixing PVC nahini trap 100x75mm including all materials and labour. |
| 54 | Supplying and fixing Solid PVC door shutter with PVC frame of size 50x45mm with suitable rebate for housing the shutter consisting of frame made out of MS tubes 19 gauge thickness and size of 19x19mm for styles and 15x15mm for top and bottom rails, M.S. frame shall be covered with 5mm thick heat moulded PVC 'C' channel of size 30x50mm forming styles and 75x50mm for top rail, lock rail and bottom rail on either side and 10mm thick 20mm wide cross PVC sheet as gap insert for top rail, bottom rail. Panelling of 5mm thick PVC sheet bearing on either side and join to gether other side etc., An additional 5mm thick PVC strip of 20mm width is to be stack and the interior side of the 'C' channel using PVC sealant adhesive including cost of all furniture fittings such as aluminium aldrop of size 250x16mm - 1No. aluminium tower bolt 250x12mm - 1No. aluminium D type handled 200mm etc., complete complying with standard specification and as directed by the departmental officers. |
| 55 | Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' or 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 10 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank. (The EWC should be got approved by the Excutive Engineer before use on works) |
| 56 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. |
| 57 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End |
| 58 | Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting |
| 59 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan 5 star rated complete (Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on existing fan clamp |
| 60 | Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with acrylic door cover with IP42 protection with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. (Make: Hager/ Legrand) |
| 61 | Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour |
| 62 | Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender