Tender For annual maintenance contract For Civil Work At Gail Corporate Office, Gail Office At 3Rd Floor Pnb Building & Wtc Office At Nauroji Nagar, New Delhi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Sep 2026
13 days left
EMD
9.52 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual maintenance contract For Civil Work At Gail Corporate Office, Gail Office At 3Rd Floor Pnb Building & Wtc Office At Nauroji Nagar, New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | BOQ1: Summary of Quoted Prices of Part-A and Part-B |
| 2 | PART A : SERVICES |
| 3 | PART B : WORKS |
| 4 | PART A : SERVICES |
| 5 | Reimbursement of basic wage of 12 workers : 1. 02 nos highly skilled supervisors required for supervision of civil maintenance/development activities, complaint redressal, data entry, and coordination2. 03 nos Skilled (Carpenter) – required for carrying out carpentry services.3. 03 nos Skilled (Plumber) – required for carrying out plumbing services.4. 04 nos Semi-skilled (Helper services) – required for carrying out helper services. |
| 6 | Skilled - Painter/ Mason/ Welder etc. (per day) |
| 7 | Semi-skilled helper services (per day) |
| 8 | SERVICES |
| 9 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 M2 on plan lead upto 50m and lift up to 1.5m, disposed soil to be levelled and neatly dressed: |
| 10 | All kinds of soil |
| 11 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 M2 on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 12 | all kinds of soil. |
| 13 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kind of soils |
| 14 | Pipes, cables etc, not exceeding 80 mm dia. |
| 15 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-Work upto floor V level |
| 17 | Concrete of mix 1:2:4 (1 cement: 2 coarse sand:4graded stone Aggregate 20 mm nominal size) |
| 18 | Concrete of mix 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). |
| 19 | Concrete of mix 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). |
| 20 | Reinforced cement concrete work |
| 21 | Reinforced cement concrete work in walls (any thickness) suspended floors,roofs,footing ,landing, walls chajjas,lintels,beams and shelves,coloumns, balconies,facias up to floor five level excluding the cost of cantering and shuttering finishing and reinforcement |
| 22 | Concrete of mix 1:1.5:3 (1 cement: 1.5 coarse sand:3graded stone Aggregate 20 mm nominal size) |
| 23 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level |
| 24 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 26 | Centering and shuttering i\c strutting and propping, etc.and removal of formwork of all types of cement concrete and R.C.C. work like Lintels, beams, plinth beams, girders, bressumers, cantilevers, etc. at all levels. |
| 27 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 28 | Reinforcement for R.C.C., work including straightening cutting, bending, binding and placing in position complete at all levels. |
| 29 | Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 30 | Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre,as per direction of Engineer-in-charge. |
| 31 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 32 | Dismantling of tile work/stone work in flooring/ skirting/ dado/cladding laid in cement mortar including stacking material within 50 mt lead for thickness 10mm to 40mm |
| 33 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with 50 metres lead. |
| 34 | Providing, precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3fine sand) etc. complete excluding plastering of the jambs, sills and soffits. 40 to 50mm. |
| 35 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 36 | Brick work with bricks of class designation 75 in super structure for all floor levels in cement mortar 1:6 (1cement: 6 coarse sand). |
| 37 | Half brick work at any level with bricks of class designation 75 with cement mortar 1:4 ( 1 cement :4 coarse sand ). |
| 38 | Extra for providing and placing in position in 2 nos. 6mm dia M.S. bars at every third course of half brick masonry |
| 39 | Providing plastering work as per following: |
| 40 | 12 mm thick plaster in 1:6 ( 1 cement :6 coarse sand ) |
| 41 | 6 mm thick plaster in 1:3 ( 1 cement :3 fine coarse sand ) |
| 42 | 15 mm thick plaster in 1:6 (1 cement : 6 coarse sand) |
| 43 | 18-20 mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement :5 coarse sand) finished with a top layer 6mm to 8mm thick cement palster 1:6(1 cement :6 coarse sand) |
| 44 | Repairs to the plaster in patches or replastering as per the existing thickness i/c cutting, dismantling old plaster in proper shape and raking out the joints, applying the cement slurry and plastering the surface of the wall complete at all floor levels i/c necessary scaffolding etc. and disposal of the rubbish within township as directed by EIC with all lead & lift & up to 20mm thick with cement mortar 1:4 ( 1 cement : 4 fine coarse sand) |
| 45 | Neat Cement punning |
| 46 | Cement plaster 15mm thick with cement mortar 1:3 ( 1cement : 3coarse sand ) finished with a floating coat of neat cement including rounding of junctions where required. |
| 47 | Finishing walls with textured exterior paint of required shade : |
| 48 | Old work (One or more coats) applied @ 1.82 ltr/10 M2 |
| 49 | Finishing walls with Acrylic Smooth exterior paint of required shade: |
| 50 | Old work (One or more coat applied @ 0.90 ltr/10 M2). |
| 51 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 52 | Painting with synthetic enamel paint of approved brand and manufacture and of required shade to give an even shade for wood/ steel work i/c necessary surface preparation. |
| 53 | On old work ( one or more coats ) |
| 54 | On new work (two or more coats ) |
| 55 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 56 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 57 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 58 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 59 | On old/new work of required shade ( two or more coats) |
| 60 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 61 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 62 | Applying priming coats with ready mixed red oxide/zinc chromate primer of approved brand and manufacture on steel galvanized iron /steel works. |
| 63 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
| 64 | French spirit polishing to give smooth appropriate finish as directed by EIC. |
| 65 | For new work Two or more coats i/c a coat of wood filler with all necessary surface preparation complete. |
| 66 | One or more coats on old work |
| 67 | Varnishing with flatting of approved brand manufacture one or more coats on old work |
| 68 | Cement concrete flooring 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate of 20mm nominal size) finished with a floating coat of neat cement including cement slurry rounding off edges,etc in patch repair or re-flooring as directed by EIC. |
| 69 | Upto 50mm thick with 20mm nominal size stone aggregates. |
| 70 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, etc. over 12mm thick bed of cement Mortar 1:3 (1 Cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg. per M2 including pointing in while cement mixed with pigment of matching shades complete. |
| 71 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 72 | Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry including rubbing and polishing complete with: |
| 73 | Markrana white second quality as approved by EIC |
| 74 | Raj nagar plain as approved by EIC |
| 75 | Udaipur green marble |
| 76 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 77 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 78 | Marble work |
| 79 | Granite work |
| 80 | Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and confiming to IS : 15622 of approved make in all l colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 81 | size of tile 600x600mm |
| 82 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 83 | Double charge vitrified tile polished finish of size |
| 84 | Size of Tile 600 x 1200 mm |
| 85 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 86 | 38mm thick wood block flooring of first class teak wood laid over 25mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10mm nominal size) to be paid separately coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per M2 including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete. |
| 87 | Providing and laying 8.3 mm thick( S-C-3) laminated wooden flooring 7 cut panel skirting ( matt finished) consisting of panels of size 1194mm x 194mm having class of use - 23 / 33, wear resistance level of AC-4 as per EN 13329 with a high pressure laminate surface treated with aluminium oxide and a specially painted surfaces guard + on top of a high density fibre board with a density of 910 kg / cum. including PE foam and polyethylene sheet complete as per specified below. The panels having a click system tongue and groove joint to secure a long lasting joint with the edges duly impregnated with paraffin. The floating laminate flooring shall be laid over a 0.20mm thick polythene film to foM a vapour barrier and 2mm to 3mm thick foam or equivalent under layer to reduce impact sound etc., complete all as per manufacturers specification and directions of Engineer in charge at all height and levels etc. for: ( Basic cost Rs 1500/- Per M2) |
| 88 | Providing corrugated / plain G.S. sheet roofing fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (for all slopes, vertical surface, circular surface etc.) excluding the cost of purlins, rafters and trusses. 0.80 mm thick with zinc coating not less than 275 gm/M2 at all height. |
| 89 | Providing ridges or hips of width 60cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. limpted and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/M2 |
| 90 | Supply & Fixing of Pre-painted coloured Trapezoidal profiled sheeting 1000-1020 mm cover width, 28 -30 mm high crests manufactured out of 0.50 mm TCT hi-tensile pre-painted Zincalume /Galvalume steel (AZ-150 gsm. Aluminium –Zinc alloy metallic coating of total both sides 550 Mpa yield stress as per AS-1397). Colour/ Exterior coat of SMP (Silicon Modified Polyester) / BHP XRW paint system, 20 micron top coat applied over 5 micron primer and a 5 micron polyester back coat applied over 5 microns primer OR equivalent coating/painting. The sheet shall have wide pans with stiffening ribs for effective water shedding and special male/female ends with full return legs on side laps for purlin support. The male end of the sheet shall have anti-capillary flute at side laps to prevent leakages. The sheet shall be fixed by means of Galvanised self-drilling self tapping fasteners (12-14x55 with EPDM seals). The sheet shall be supplied in lengths maximum upto 6-12 Mtrs long to suit site dimensions. The scope includes all sealing of joint, curves , edges or other accessories with silicon sealant. |
| 91 | The bidder may consider CLIPLOCK system instead of self drilling screw system without any change in specification, rates and teMs and conditions of the work. |
| 92 | The work will include cost of all labour, equipments, materials, submission of shop drawing, cost of consumables, fasteners/CLIP LOCK, washers etc. The work is to be carried out directly as per specifications and direction of engineer incharge and the manufacturer. |
| 93 | - 0.50 mm thick TCT (Total Coated Thickness) / 0.45 BMT (Base Metal Thickness) precoated sheet of make \\"TATA BlueScope\\", \\"Lloyd\\" , Interacrh or equivalent confiMing with minimum tensile strength 550 Mpa confiMing AS : 1397. The sheet should pass 1000 hour salt test as per relevent test. |
| 94 | Steel work welded in built up section / single section / framework I/c cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required for any type of structural steel work welded or bolted or riveted or fixed or grouted in concrete or any other type of work within the plant boundary etc.at all height as per direction of EIC. |
| 95 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 96 | In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. |
| 97 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 98 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 99 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with ISI marked black enamelled M.S. butt hinges with necessary screws excluding, panelling which will be paid for separately. (Note:- Butt hinges shall be paid separately) |
| 100 | Second class teak wood - 32/35 MM |
| 101 | Providing and fixing 32/35 mm thick ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws.(Extra providing if required, 2nd class teak wood lipping 25 mm minimum depth on all edges of shutter will be paid separately). Overall area of door shutter to be measured. |
| 102 | Extra for providing and fixing flush doors with teak veneering in place of commercial veneered ply.On one side in item No. F.1.77 |
| 103 | Providing and fixing 32/35 mm thick ISI marked flush door shutters with 1 mm thick laminated sheet on one side, core of block board construction with frame of 1st class hard wood including 6 mm thick beading all around the shutter with Stainless Steel butt hinges with necessary screws. overall area of door shutter to be measured. |
| 104 | Providing and fixing 32/35mm thick wire gauge shutter using galvanized M.S. wire gauge of I.S. gauge of designation 85G with wire of dia 0.63mm doors windows and clerestory windows including necessary screws black enamelled Ms butt hinges etc. wherever required with second class teak wood including primer and painting two or more coats with synthetic enamel paint of approved brand & manufacture including removal of damaged shutter & its disposal as directed by EIC. |
| 105 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS: 1285, anodized transparent of dyed to required shade according to IS: 1868 (minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required including PVC/neoprene felt etc. Aluminium sections shall be smooth rust free straight mitered and jointed mechanically wherever required including cleat angle, aluminium snap bleaing for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, fittings and panelling to be paid for separately). |
| 106 | For fixed portion |
| 107 | Anodized aluminium (anodized transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) |
| 108 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 109 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required. |
| 110 | Anodized aluminium (anodized transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) |
| 111 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 112 | Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade I, Type II confoMing to IS: 12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling with C.P. brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 113 | Providing & fixing Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
| 114 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 115 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap bleaing/PVC/neoprene felt/ gasket shall be paid in basic item): |
| 116 | With glass panes of 4.0 mm thickness |
| 117 | With glass panes of 5.50 mm thickness |
| 118 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 119 | 12.5 mm thick tapered edge gypsum plain board conforming to IS prevaling as on date (Board with BIS certification marks) |
| 120 | Providing and fixing anodised /powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 121 | Providing and fixing factory made UPVC door frame made of UPVC extruded section having an overall dimension as below (tolerance + 1mm) with wall thickness 2.0mm + 0.2mm, corners of the door trame to be mitred and welded of plastic, galvanized brackets and stainless steel screws. The hinge side vertical of the frame reinforced by galvanized M.S tube of size 19x19mm and 1m + 0.1 mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufactures specification and direction of Engineer-in-charge. |
| 122 | Extruded section profile size 48x40 mm. |
| 123 | Extruded section profile size 42x50 mm. |
| 124 | Providing and fixing to door frames & shutter. |
| 125 | 24mm thick factory made Polyvinyl Chloride (PVC) door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm +0.2 mm with inbuilt decorative moulding edging on one sides. The style and rails metred and joined at the corners by means of M.S galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The style of the shutter reinforced by inserting galvanised M.S tube of size 20x20 mm and 1 mm + 0.1 mm wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100X24mm and 2mm + 0.2 mm wall thickness fixed to the shutter style by means of plastic/galvanised M.S. 'U' sleats. the shutter frame filed with a UPVC multi-chambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm + 0.1 mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S rod and fastened with with nuts and washers, complete as per manufacture's specification and direction of Engineer-in-charge as per CPWD. |
| 126 | 30mm thick factory made Polyvinyl Chloride (PVC) door shutters made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm +0.2 mm with inbuilt decorative moulding edging on one sides. The style and rails metred and joined at the corners by means of M.S galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The style of the shutter reinforced by inserting galvanised M.S tube of size 25x20 mm and 1 mm + 0.1 mm wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100X30mm and 2mm + 0.2 mm wall thickness fixed to the shutter style by means of plastic/galvanised M.S. 'U' cleas. the shutter frame filed with a UPVC multi-chambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm + 0.1 mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S rod and fastened with with nuts and washers, complete as per manufacture's specification and direction of Engineer-in-charge. |
| 127 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete |
| 128 | Fixed to steel windows by welding. |
| 129 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 130 | Providing & fixing of Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing/ the cost of cutting chases and making good the same/trenching ,refilling including testing of joints complete. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge for external/concealed work/Internal work. |
| 131 | Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia. |
| 132 | Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia |
| 133 | Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. |
| 134 | Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia. |
| 135 | Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia. |
| 136 | Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia. |
| 137 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
| 138 | Rectangular shape 600 mm X 450 mm internal diameter |
| 139 | Circular shape 560 mm internal diameter |
| 140 | Providing wood work in frames of door windows/clear storey windows and other frames, wrought framed fixed in position including primer and painting two or more coats with synthetic enamel paint of approved brand & manufacture item includes repairing of plaster, touching/ painting of damaged wall as per existing wall paint finish & shade complete in all respect wherever required. |
| 141 | IInd class teak work |
| 142 | Sal Wood |
| 143 | Providing and fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete as per directions of Engineerin- charge.(Unit EA = Set) |
| 144 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : |
| 145 | Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: |
| 146 | With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
| 147 | Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: |
| 148 | With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
| 149 | Supplying chemical emulsion in sealed containers including delivery as specified. |
| 150 | Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 151 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank (black/white), IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 152 | Supplying tractor trolley for disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for all lifts, complete as per directions of Engineer-in-charge. (01 EA= 01 day hiring for 08 Hrs.) |
| 153 | Supply of following materials of approved brand & manufacturer at site as per instructions of EIC. |
| 154 | SUPPLY OF PVC BALL OF APPROVED Quality for Float Valve (75 mm to 100 mm dia) |
| 155 | Providing & fixing 4mm thick Aluminium composite panel (ACP) cladding of approved shade & pattern of INDO BOND or equivalent make ( exterior grade) sandwiched between two skins of 0.5mm with thermoplastic core of mid low density poythene ACP cladding to be fixed on grid of standard size of aluminium section 25mmx50mm framing by anchored screws and double tape of approved quality including sealing the joints by the silicon sealant (789-Doorcorning make) to make joints leak proof including the cost of cutting bending & fixing of ACP sheets, scaffolding etc., complete as per direction of Engineer-In-Charge, (scaffolding to be paid separately) |
| 156 | Supply of welding machine along with one welder for one time alongwith the materials like electrodes, etc. complete. (per day) |
| 157 | Cordination with Delhi Jal Board/CPWD/Other Municipal Authority for cleaning of external sewer line/manhole infront of GAIL offices.The job will be exected as and when required in case of chokage in external sewerline. |
| 158 | Supply of potable water through water tanker of required capacity as per the direction of EIC. Water tanker having max capacity - 5000 litres. |
| 159 | Supply 2 mm thick corrugated polycarbonate sheet of approved manufacturer (in approved shade) over steel structure with required J/U bolt with washer, etc. complete. |
| 160 | Supply of the following materials of approved make and manufacturer at site, including transportation, loading/unloading and incidental charges, complete in all respects and as directed by the Engineer-in-Charge (EIC). |
| 161 | 4 mm thick frosted glass pane |
| 162 | 2nd class Teak wood beading of size 18 mm X 5 mm |
| 163 | 2nd class teak wood lipping 25x3mm |
| 164 | 6 mm thick commercial ply wood |
| 165 | 12 mm thick commercial ply wood |
| 166 | 18 mm thick block board with commercial ply veneering on both side |
| 167 | 1mm thick laminated sheet |
| 168 | 18 mm thick Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) grade I, type II conforming to IS:12823 (exterior grade) |
| 169 | 25 mm thick Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) grade I, type II conforming to IS:12823 (exterior grade) |
| 170 | Supply of putty for wood work & steel work |
| 171 | Nickel plated mild steel piano hinges 1 mm thick 35 mm wide |
| 172 | Brass mortice latch 100 mm with a pair of lever handles |
| 173 | Brass night latch of approved quality |
| 174 | Brass mortice latch and lock 100 mm and a pair of brass lever handles |
| 175 | Nickel plated MS pipe from 20mm to 25 mm dia |
| 176 | Stainless steel SS grade 304, curtain rod 25 mm dia 1.20mm thick |
| 177 | Nickel plated MS bracket for curtain rod of approved quality |
| 178 | Stainless steel brackets/ end closures of curtain rod 25 mm dia 1.20mm thick (Brackets - End fixed or middle/regular type) |
| 179 | Bright finished brass cup board or wardrobe locks of size 65mm |
| 180 | 3 mm thick translucent white acrylic plastic sheet |
| 181 | Magnetic catchers |
| 182 | Heavy duty telescopic channels for drawers of 12\\" to 24 \\" (EA=1 Set) |
| 183 | EPDM Gaskit for doors and window |
| 184 | kitchen sink.- White glazed fire clay sink size 600x450x250mm |
| 185 | Supply Stainless Steel kitchen sink with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, : Kitchen sink with drain board 510x1040 mm bowl depth 225 mm |
| 186 | Supply Stainless Steel kitchen sink with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting a : Kitchen sink without drain board 610x460 mm bowl depth 200 mm |
| 187 | C. P. brass Angle valve / pillar cock -15mm dia |
| 188 | CP Concealed valves 15mm |
| 189 | C. P. brass Bottle trap with washer complete |
| 190 | PVC connection pipe 450/600 mm long with CP brass unions |
| 191 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 192 | 600x120x5 mm glass shelf with edges rounded off supported on anodized angle fame and guard rail complete. |
| 193 | CP brass waste of approved quality for sink wash basin with coupling complete 32-40mm |
| 194 | Polyethylene water storage tank ISI: 12701 with cover and suitable locking arrangement |
| 195 | 15mm nominal size CP brass short/ long body bib cock |
| 196 | Supply of Portland cement. EA = 100 kg |
| 197 | Supplying white cement |
| 198 | Supply and stacking of coarse sand. |
| 199 | Supply of bricks class designation 7.5 |
| 200 | Supplying float glass panes of nominal thickness 4mm (weight not less tha 10 kg/sqm) |
| 201 | Supplying float glass panes of nominal thickness 5mm (weight not less tha 12.50 kg/sqm) |
| 202 | Supplying float glass panes of nominal thickness 8mm (weight not less tha 20 kg/sqm) |
| 203 | 8 mm thick plain glass panes with edges rounded off |
| 204 | 10 mm thick plain glass panes with edges rounded off |
| 205 | 12 mm thick plain glass panes with edges rounded off |
| 206 | 5 mm thick wired glass sheet |
| 207 | Decorative glass shelf supports of S.S./ Brass with necessary screws etc. complete, suitable for glass of 5 to 10 mm thickness |
| 208 | Decorative glass door pivot of S.S./ Brass with necessary screws etc. complete, suitable for glass of 8 to 12 mm thickness including it's placement / fixing as directed by EIC |
| 209 | Decorative handle of S.S./ Brass or other suitable material, with necessary screws etc. complete, suitable for glass of 8 to 12 mm thickness including it's placement / fixing as directed by EIC |
| 210 | Decorative knob of S.S./ Brass or any other material, with necessary screws etc. complete ,suitable for glass of 8 to 12 mm thickness including it's placement / fixing as directed by EIC |
| 211 | Decorative locking arrangement for glass doors of showcase with all necessary accessories complete including it's placement / fixing as directed by EIC |
| 212 | Stainless Steel wire mesh of average width of aperture 1.4mm with wire of dia 0.50 mm |
| 213 | Universal Hydraulic door closer (ISI make) |
| 214 | Multipurpose lock 50 mm for drawers, etc. |
| 215 | Multipurpose lock 25 mm for drawers, etc. |
| 216 | 5mm thick superior quality mirror glass sheet including backing 6mm ply |
| 217 | Sliding glass Aluminium channels of sizes 25mm x 12mm ( E- section ) |
| 218 | Glass runner for glass sliding shutters for showcase ,etc. |
| 219 | Glass runner for glass sliding shutters for showcase ,etc. |
| 220 | 20/25mm dia decorative type curtain rod |
| 221 | 2nd class Teak wood beading of size 40mm X 12 mm |
| 222 | 2nd class Teak wood beading of size 35mm X 5 mm |
| 223 | 2nd class Moulded beading 25mm -40mm x avg 5mm thick |
| 224 | 4 mm thick Teak ply wood plain lining |
| 225 | 8 mm thick commercial ply wood |
| 226 | 25 mm thick block board with commercial ply veneering on both side |
| 227 | 24 gauge anodized aluminium sheet |
| 228 | Fitting for cistern like syphon, washer etc. |
| 229 | Providing aluminium door sil of approved quality . |
| 230 | Toughend door fitting Door patch fitting( Total 5 Items) Make Doorma Top patch, Bottom patch, Corner Bottom lock Patch, Glass door Pivot ,Floor Spring |
| 231 | Providing Dorma lock of approved quality with necessary fittings etc |
| 232 | Bison board of thickness 6mm-12mm of approved quality |
| 233 | Bison board of thickness 16mm-20mm of approved quality |
| 234 | Providing SS Door Handle 500mm long |
| 235 | Providing SS Tower bolt 300x10mm |
| 236 | Providing SS door stopper of make Dorset or equivalent as approved by EIC |
| 237 | Providing Dead Door lock with cylinder |
| 238 | Supply of mortice lock of 100 mm ISI marked of approved brand |
| 239 | Supply of cylindrical lock ISI marked of approved brand |
| 240 | Supply of decorative type SS handles ISI marked of approved brand |
| 241 | Providing of CPVC Gate valve 50mm dia. With approved quality |
| 242 | Providing of CPVC Gate valve 40mm dia. With approved quality |
| 243 | Providing of CPVC Gate valve 25mm dia. With approved quality |
| 244 | Providing of CPVC Gate valve 20mm dia. With approved quality |
| 245 | Providing of Pillar cock self closing system With approved quality |
| 246 | White/ Ivory- oval shape wash basin of size about 560x410mm ( counter sunk/ counter top) |
| 247 | C.P. brass mixer with diverter |
| 248 | CP brass toilet paper holder |
| 249 | CP brass towel rod with bracket of approved make complete of size 600x20mm |
| 250 | CP copper pipe with nut for geyser, wash basin, W.C, etc. up to 600mm long with CP brass unions |
| 251 | CP brass shower rose of up to 100 mm dia of approved brand |
| 252 | 15mm CP brass pillar tap with elbow operative lever. |
| 253 | PVC float valve set with plastic float and rod etc. For PVC cisterns |
| 254 | Cistern washer (tortoise) |
| 255 | Brass face for bib cocks |
| 256 | PVC flushing pipe for cistern |
| 257 | PVC Cistern knob / handle with or without lever of required size and shape |
| 258 | PVC Clamps with necessary screws etc. for up to 4\\" dia pipe |
| 259 | PVC bends/shoe/ collar/ cap/ Tee/ cowl etc.. for up to 4\\" dia pipe with necessary screws & or adhesives wherever required |
| 260 | Stainless steel circular grating of approved quality of size upto 150 mm dia for floor traps |
| 261 | CP brass kitchen sink mixer as approved by EIC |
| 262 | Hand shower (telephonic) with pipe & stand |
| 263 | C.I. cover with / without frame for manhole chamber. |
| 264 | 455x610mm (approx.) rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. |
| 265 | 500mm (approx.) diameter C.I. cover (medium duty) the weight of the cover to be not less than 58kg. |
| 266 | 300 X 300 MM size C.I.Cover for gully trap etc. with frame |
| 267 | 300 X 300 MM size C.I.Cover without frame |
| 268 | CP high flow single lever bath & shower mixer (concealed body with button spout) composite one piece body. |
| 269 | Supply of Fiber Glass Reinforced translucent plastic sheet about 2mm thick. |
| 270 | Supply of Epoxy Grout |
| 271 | Supply and stacking of coarse aggregate20 mm nominal size |
| 272 | Supply of aluminium door seals of length 900mm with nylon brush including necessary screws, transportaion to KHEL Gaon site. The width of aluminium section shall be 20-22 mm and brush strip section shall be 23-25 mm. The minimum thickness of the aluminium section shall be 0.9 mm. The door seal shall have the option of replacing the nylon brush part. The aluminium material of door seal shall be powder coated and the color shall be brown. |
| 273 | Supply of basin mixer of Jaquar/Roca/Kohler make as approved by EIC. Model No Jaquar CON-167KNB or equivalent. |
| 274 | Supply of Wall Mixer of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar CON219KN or equivalent. |
| 275 | Supply of 19 mm thick water proof commercial board |
| 276 | Supply of 19 mm thick commercial board |
| 277 | Supply of looking mirror including SS fittings etc. all complete as approved by EIC. |
| 278 | Supply of SS hinges of Godrej/Hafele with screws etc. all complete : 125 mm |
| 279 | Supply of SS hinges of Godrej/Hafele with screws etc. all complete :100 mm |
| 280 | Supply of SS hinges of Godrej/Hafele with screws etc. all complete 75 mm |
| 281 | Supply of SS tower bolt of Godrej/Hafele with screws etc. all complete : 200 mm |
| 282 | Supply of SS tower bolt of Godrej/Hafele with screws etc. all complete : 150 mm |
| 283 | Supply of SS tower bolt of Godrej/Hafele with screws etc. all complete : 100 mm |
| 284 | Supply of SS handle with screws etc. all complete : 150 mm |
| 285 | Supply of SS handle with screws etc. all complete : 100 mm |
| 286 | Supply of Health faucet pipe 1 m long as approved by EIC. Jaquar ALD-CHR-563 |
| 287 | Supply of Health faucet set Jaquar ALD-CHR-564 |
| 288 | Supply of Bottle Trap ALD-CHR-769L250X190 Jaquar |
| 289 | Supply of towel ring round with flange of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar ACN1121BN or equivalent. |
| 290 | Supply of Corner Glass self of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar ACN1173 or equivalent. |
| 291 | Supply of Glass Shelf of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar ACN1171N or equivalent. |
| 292 | Supply of Toilet Roll Holder of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar ACN1151N or equivalent. |
| 293 | Supply of Angular Stop Cock of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar CON053KN or equivalent. |
| 294 | Supply of Bib Cock of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar CON037KN or equivalent. |
| 295 | Supply of Long Bib Cock of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar CON107KN or equivalent. |
| 296 | Supply of 2 Way Bib Cock of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar CON041KN or equivalent. |
| 297 | Supply of sink mixer of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar CON309KNBM/ CON309KNM or equivalent. |
| 298 | Supply of concealed stop cock of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar CON083FTK or equivalent. |
| 299 | Supply of Pillar cock of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar CON011KN or equivalent. |
| 300 | Supply of Tumbler Holder of Jaquar/Roca/Kohler make as approved by EIC. Model No Jaquar AKP-35741P or equivalent. |
| 301 | Supply of Double Coat Hook of Jaquar/Roca/Kohler make as approved by EIC. Model No Jaquar AKP-35761P or equivalent. |
| 302 | Supply of single piece WC with PP Soft close seat cover, hinges, fixing accessories set and cistern fittings of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar SLS WHT6851S/ SLS WHT6851P/ SLS WHT6853S or equivalent. |
| 303 | Supply of wall hung basin with fixing accessories 550*400*195 of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar CNSWHT801 or equivalent. |
| 304 | Supply of soft close seat cover for EWC of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar SLSWHT6103PP or equivalent |
| 305 | Supply of shower arm 20 mm & 300 mm long round shape with 90 degree bend for wall mounted shower with SS Flange of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar SHA-CHR-479L300S or equivalent. |
| 306 | Supply of easy flex tube in chrome finish 1.5 m longs with nuts of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar SHA-CHR-571 or equivalent. |
| 307 | Supply of Overhead Shower dia 105 mm round shape flow with air effect (ABS Body & face plate) of Jaquar/Roca/Kohler as approved by EIC. Model no. Jaquar OHS-CHR-1709 or equivalent. |
| 308 | Supply of Single towel rail 600 mm of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar ACN-CHR-1111SM or equivalent. |
| 309 | Supply of Towel Rack 600 mm long without lower hangers of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar ACN-CHR-1181FS or equivalent. |
| 310 | Supply of 450mm SS Connection Pipe for WC and wash basin 15 mm bore of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar ALD-CHR-803AB or equivalent. |
| 311 | Supply of soap dish of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar ACN-CHR-1131N or equivalent. |
| 312 | Supply of the concealed body for single lever high flow diverter with button assembly cartridge sleeve but without exposed parts of Jaquar make as approved by EIC. Model no. ALD-CHR-079N or equivalent model. |
| 313 | Supply of the single lever exposed parts kit of high flow diverter consisting of operating lever wall flange (with seals) & button only of Jaquar make as approved by EIC. . Model no. ARI-CHR-39079NK or equivalent model. |
| 314 | Supply of the bathtub spout with wall flange of Jaquar/Roca/Kohler make as approved by EIC. Model no. Jaquar SPJ-CHR-35429PM or equivalent. |
| 315 | Supply of SS cockcroach trap of chilly brand for of all sizes as approved by EIC. |
| 316 | Providing and fixing 18mm thick gang saw cut ( premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red |
| 317 | Area of slab over 0.50 M2( For sill) |
| 318 | Pre Engineered Marble for Kitchen Counter Top |
| 319 | Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/M2 including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 18 mm thick Granite Stone Cladding etc |
| 320 | Providing and fixing following 18mm Italian/Imported Marble stone. The stone to be fixed after putting dabs of neat cement on walls & resting stone on the Stone to be anchored at bottom and at top with \\"L\\" Shaped MS Cleats as per details. Back of stone to be filled with white cement slurry complete. Size of the stone to be atleast 2100mm height /length x600mm wide. Joints to be minimal and filled with white cement mixed with colour pigment to match colour of stone. The item include polishing the laid stone to give a plain, level and smooth finish complete. For LOBBY and entrance facia with (Botticino Classic ,Grey William, Royal Diana, Statuario Marble, Rosso Verona etc. to be White with minimum base rate of Aprox Rs. 800/Sqft.) |
| 321 | Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge. |
| 322 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood |
| 323 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISImarked Stainless Steel butt hinges with necessary screws |
| 324 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 150 mm. the cost of architrave arounf the frame shall be included in the quoted cost. |
| 325 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick |
| 326 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 100x60x2.50 mm |
| 327 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 328 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
| 329 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm |
| 330 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed of required colour and shade, with necessary screws bolts, nut and washers etc. complete. |
| 331 | Providing and fixing aluminium handles, ISI marked, anodised (anodi coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm |
| 332 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper |
| 333 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineerin-charge |
| 334 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick |
| 335 | Providing and fixing approved brand and manufacture of Rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two independent closing valves and latching speed adjustable by arM Silver finish. As per EN 1154. Approved Make : dormakaba / Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge. |
| 336 | Providing and fixing approved brand and manufacture of 4012 wall mounted door stop dome with 60mm length with fixing accessories Approved Make : dormakaba / Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge. |
| 337 | Providing and fixing approved brand and manufacture of Pure 8100 Type 3 Package with Pair of Pure 8100 Design Lever Handle on Roses & escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square forend. EPC 60mm length oneside thumb turn otherside coin release operation Approved Make :dormakaba / Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge. |
| 338 | Providing and fixing approved brand and manufacture of Stainless Steel Tower bolt 300 mm long with 10 mm dia ( TR 1210SS) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge. |
| 339 | Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5per cent tolerance in dimension i.e. in depth & width of profile shall be acceptable. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 M2) Approved Make : Fenesta,Saint-Gobain & VEKA India etc. |
| 340 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5per cent tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 M2). Approved Make : Fenesta,Saint-Gobain & VEKA India etc. |
| 341 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on EA side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5per cent tolerance in dimension i.e. in depth & width of profile shall be acceptable. Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 M2) Approved Make : Fenesta,Saint-Gobain & VEKA India etc. |
| 342 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows, Doors and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With aluminium Snap beading. |
| 343 | Providing and fixing steel roller for uPVC / aluminium sliding window with necessary screws etc. complete. |
| 344 | Providing and fixing steel (white power coated) crescent lock for uPVC / aluminium sliding window/ door with necessary screws etc. complete. |
| 345 | Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 EA on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded). |
| 346 | Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately). |
| 347 | Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 M2 |
| 348 | Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. |
| 349 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. |
| 350 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 351 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 per cent and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ M2 including grouting the joint with white cement & matching pigments etc. complete. |
| 352 | Size of Tile 600x600 mm |
| 353 | Size of Tile 600 x 1200 mm |
| 354 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08per cent and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/M2 including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 1200 mm |
| 355 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08per cent and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/M2 including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size |
| 356 | Size of Tile 600 x 600 mm |
| 357 | Size of Tile 600 x 1200 mm |
| 358 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 359 | Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/M2, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone (Botticino Classic ,Grey William, Royal Diana, Statuario Marble, Rosso Verona etc. to be White with minimum base rate of Aprox Rs. 465/Sqft.) |
| 360 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 361 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 362 | Providing and fixing 100 mm wide Aluminium Skirting 3.15 mm thick of approved shade and colour with required Hardwares/screws/joints corner profiles etc all complete as per design and detail as per drg. |
| 363 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from MS. sheets and galvanized with zinc coating of 120 gms/M2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm EA having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board |
| 364 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ M2, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings,fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 per cent) total coated thickness with zinc coating 120 grams per M2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 M or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 per cent) total coated thickness, Zinc coating 120 grams per M2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self drilling/ self tapping screws complete : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately). 12.52X 12.51 BCD GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/M2 (both sides inclusive) and 20per cent perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 365 | One AHPCP-Aluminium High Pressure Composite Panel Providing AHPL Cladding. Providing and fixing Facia High Pressure Composite (AHPCP) of exterior grade with 15 years of warranty for cladding of Alutuff /Decorex / Alucobond approved make for external wall / column /Canopy cladding in combination of solid / Metallic colours/ Wooden Colours, including all necessary frame work and complete weather sealing. The facia panel should consist of 5mm High grade virgin polymer core of High pressure aluminium composite sandwiched between 2 skins of 0.25mm thick high strength aluminium Foil (alloy designation A3105 / H18) making a total panel thickness of 6mM The surface will be furnished with PVDF coating on top sides and service coating on reverse side with anti-water spot and 90 degree bend. Weight should be 7.5 kg/m², Section modulus should be 1.75cm³/m & rigidity 2400 kNcm²/m with elongation 22per cent (DIN EN 485-2). The testing done in shriram lab. The system shall be fixed using GI brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufactures specification and shall withstand a wind pressure as suggested by Structural Engineer/Proof Checker. All hardware shall corrosion resistant frame out of anodised aluminium member. |
| 366 | Providing and fixing of Baffle false ceiling system comprises 75 mm x 150 mm (75 mm width and 150 mm Height) U Shape panels. Panels shall be made of 0.7 mm thick Aluminium sheet with wooden finish powder coating on the front side with 60 microns powder coating. Length of the panel will be up to 3000 mM Panel shall be high corrosion resistance and good color stability. Panel to panel gap will be 150 mM Panels are fixed on to roll formed carriers 50 mm wide x 20 mm deep out of 0.75 mm G.I sheet powder coated with cutouts to hold the panels in module of 150 mm at maximum 1200 mm c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized thread rod hanger with height adjustment at max. 1200 mm c/c. Hangers are fixed to the roof by #J# hooks or ceiling brackets and Fasteners. Panels are factory cut in lengths up to maximum 3000 mm to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels. Inner cap and outer cap are used to nut bolt the panel with carrier. These Baffles are light weight and do not add any extra load on ceiling. |
| 367 | Open Cell Ceiling System Supply & Installation of Luxalon® Aluminium AA3105 Cell Ceiling 50E manufactured by HDI of approved colour consisting of Main Runner, Cross Runner, Upper Sections, Lower Sections all of U-Shaped Profiles 10mm wide x 50mm deep x 0.5mm thick with inwardly returned edges of 2.5mM Coil coated on a continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy for higher strength and good roll forming characteristics. The ceiling panels coil undergoes through levelling process on advanced CAD/CAM equipment to acheive levelling through ARKU SIX Hi configuration roller levelling process to ensure the flatness of the coil in the manufacturing process and releves stresses of coil. Cell ceiling panels should be manufactured from Roll forming machine to get the high-quality panels with accurate dimensions. Aluminium Alloy (Al.Mg) AA3105 for higher strength and good Roll Forming characteristics. The Main Runner shall be fixed at a distance of 1.2mtrs c/c and shall be suspended b means of G.I. Suspension Rod 4mm diameter and a Galvanized Suspension Spring Clip at a distance of 1.2mtr c/c. The Cross-Runner shall be fixed to the Main Runner at a distance 0.6mtrs c/c., with a self-locking device. The Upper Section and Lower section shall be fixed to the Main Runner and Cross Runner in a form of a Cell Structure of module 100 X 100 mm x 100mm in traingular cell shape with a self-locking device. Paint Finish: The baffle coils to go through 4 stages of pre-treatment, three times oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability. The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5microns and a coat of natural colour of 5microns, exposed surface to have a primer of 5microns, binder of 5microns and topcoat of approved colour of 15 microns. All ceiling shall be Green pro Certified: For LEED certification by Indian Green Building council (IGBC). Ceiling manufacturer should have local manufacturing unit in India. Manufacturer should have Roll-forming machine to produce Baffle panels & in-house testing lab in India & having more than 20 years of existence in India. Approved Makes - Hunter Douglas, Gorden, SAS, Armstrong |
| 368 | Providing & Fixing Of #WPC Louvers Wall Panelling & Ceiling in modules of 2900x160x23mm or 2700x200x14mm made of Wood plastic composite as approved to be installed using special clip system as per the manufacture specification. Scaffolding to be provided by the client. All material should be of approved make & complete as per the drawing, specification and approval of architect. |
| 369 | WPC Louvers Wall Panelling |
| 370 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. (EA = per bag of 50 kg cement used in mix) |
| 371 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 M2) over and including priming coat of exterior primer applied @ 2.20kg/10 M2 |
| 372 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 373 | Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. |
| 374 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 375 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 376 | DGU Glass: Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12-6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer high performance heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.1) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in M2 (i) Clear float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 per cent, Light reflection internal 10 to 15per cent, light reflection external 10 to 20 per cent, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. |
| 377 | Providing and fixing of Deck make roller blind from Lux Series having sturdy aluminium top tube of 38mm diameter, powder coated bottom bar, with suitable roller clutch mechanism and plastic ball chain. The roller blind fabric should possess the below mentioned specifications with fabric made up of 85per cent polyester and 15per cent cationic polyester with openness factor - dimout & color fastness - 5 to 6. Roller blinds with solar protection fabric of high tenacity polyester Yarn & fungi static treatment and should block the light flux & offer elimination of glare and sunlight / heat radiance. Fabric shall have visible light & solar properties. 1st weave of thickness 0.75 mm ±5per cent and weighing 360 gsm ± 5per cent. Flame retardancy as per AS301.3-1999. Fabric protected by teflon fabric protector for water and stain resitance. Harmful substance standard Oeko-tex standard 100. Construction of fabric 16.5+1_ Warp and end/cm 17.5+_1 (fill). Aluminium profile should have temper WP consisting of alloy 63400 along with anodizing of 10 micron and powder coating of 60 micron. The tensile strength of profile should be 9.10 Kg/mm square and elongation 18.The control clutch drive unit engineered heavy duty chain drive pulley operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 38mm into roller tube. It is self-lubricating exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be positioned at right hand or left hand side of the shade. Clutch gear ratio of 1.75:1 for reduced operating force on larger blinds. Mounting hardware brackets universal brackets including end plug bracket with lock down retainer device. Brackets finish of powder coated metal installation brackets made of stamped and hardened steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm diameter cord with plastic balls moulded to form an endless ball chain. It is used for raising or lowering action of the shades. Plastic parts all plastic components are UV-stable compounds available white.Approved make: deck, Hunter Douglas, d decor, Aerolux |
| 378 | Providing and fixing Single layer of (10-12mm) thick MDF Ply as per details on single side of the existing aluminum partitions framework or Existing wall as per drawing details/site requirement shall be provided as per the direction of EIC. |
| 379 | LAMINATE PANELING. Supply and installation of approved shade laminate paneling over 12mm thk Marine-710 Ply Board as backing to achieve required partition thickness & support as per the manufacturer specifications & details complete. |
| 380 | VENEER PANELING. Supply and installation of approved shade Veener paneling over 8mm thk Marine -710 Ply Board as backing to achieve required partition thickness & support as per the manufacturer specifications & details complete. |
| 381 | FABRIC PANELING Supply and installation of 6m thick soft board panels with 6mm thick Marine 710 Ply Board with 6mm thick cross link foam and finished in fabric. The panels to be fitted to posts using galvanized steel brackets, ensuring a quick and simple installation or re configuration on site |
| 382 | LAQUER GLASS PARTITION/PANELLING. Providing & Fixing of lacquer glass as per approval in any color fixed on existing ply/ MDF base with all other acessories as per architectural drawing. The Lacquered glass shall be highly durable, humid resistance, polyurethane lacquer glass. The glass to be manufactured by industrial curtain coating process. It should meet quality standards as per BS EN 1036 1999 & conform to persoz hardness test of at least 220 oscillations. The substrate of the glass should confirm to Standard BS EN 572 1995 parts 1 & 2. Lacquered glass to be manufactured to tight specifications, relating to consistency of color, opacity and homogeneity throughout production campaigns and also to the ageing properties, mechanical resistance, and resistance to humidity and to chemical agents of the lacquer. The color of the lacquer should remain stable when exposed to normal levels of ultra-violet light in interior applications |
| 383 | Supply, installation testing and commissioning of vertical garden consisting of welded MS Structure, poly propylene green wall module with pots, Drip irrigation system and good-looking outdoor plants to create a natural vertical garden look. The MS structure for vertical garden of height 8.00 meter shall be designed by the specialized agency to be enaged for the work of vertical garden. MS structure to be finished with two or more coat of epoxy paint of approved quality and shade over one coat of primer. Poly propylene green wall module of size approx. 170mm x 470mm shall be mounted over MS Structure with the support of fastener/screw /nut bolt etc as required. EA module shall contain three poly propylene pots of size approx 125mm x 125mM Drip Irrigation system consiting of LLDPE Drip tubing 16 mm OD, 3.0 Kg/cm² rating, 2 LPH emitters at approx 150 mm spacing including all fittings and cpvc pipes of suitable sizes for making connection with existing irrigation main line and shall be capable to supply water to individual potted plants. Plantation of different type of outdoor good looking plants to create a natural vertical garden look with light weight. EA pot shall contain soil mixture having cocopit, vermi compost, parlite, vermilite & good earth, suitable for plantation. Vertical garden shall be completed in all respect including temporary staging & bracing and removal of the same after completion of vertical garden and maintenance till the handing over to client, all complete as per direction of Engineer-In-Charge. |
| 384 | GLASS GRAPHICS. Providing and fixing film etching with plotter cutting and application of 3M/LUMAR/GARWARE make as per approved design on glass surfaces all complete as per instructions and patterns and design of the Architect. |
| 385 | Corian top:- Providing & fixing cladding/panelling with 'Corian' finish using Acrylic solid surface of 6 mm thickness on top of tables, facia storage units, columns , ledgesetc etc. where directed. The rate to include all rubbing polishing materials, labour, transportation, wastages etc. complete. |
| 386 | Wooden sound slate Panelling. Providing and fixing in position wall paneling of grooved wood panels ESTO width 192mm, thickness of 16mm and length 2440 mm made up of high density fibre board with minimum density of 800 Kg/m3 substrate with a laminated facing as per the approved shade/species & finish with melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 3 mm grooves at 21mm pitch. The panels shall be highly moisture resistant and have fire resistance of Class I,BS 476 part 7.The edges of the panels shall be #tongued-and-grooved# to receive special clips for installation. The back of the perforated panels shall have sound absorbing non-woven acoustical fleece and backed with 50mm thick rock wool layer as directed by the Engineer-in Charge. The panels shall be mounted on special channels using clips as approved by the Engineer -in-charge. Install G.I stud of section 48X34X36 mm or as approved by the Engineer -in- Charge on the solid wall using screws at spacing of 600mm centre-to-centre. Screw the aluminum channel (keel) on channeled G.I stud 600mm centre to centre. Install the first set of wooden panels by inserting the clips. For border channel insert the groove of the panel in to the projecting flange of the clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channel into the next aluminum channel (keel) and simultaneously fill the gap between wall & panel with 50mm thick rock wool having density of 48 kg/m3. Continue the process till the actual height is achieved. Use clips for border channel to finish off the installation, finish the edges and joints using wood molding of matching color (to be provided by others) as approved by Engineer-in- Charge. The installed panels should give an NRC of 0.9. |
| 387 | Frosted sparkling glass film : Providing and fixing 3M Scotchcal Frosted Crystal or equivalent approved Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised designs. MCS warranty of 3 (if exposed to direct sunlight) to 10yrs (indoors) must be endorsed by manufacturer. Rate shall be inclusive plotter cutting design as per architect suggestion. Contractor shall provide shop drawing for approval of Architect.work complete incuding all type of tools, tackles, scaffolding etc complete as per suggestion of Architect/ EIC. If in case any application finishing will not as per satisfaction contractor shall remove all film at their cost. Contractor shall do a sample mock of 5 M2 minimum of glass film) ,shall be approved from EIC.( At all floor) |
| 388 | Providing and fixing Golden Brass T-Profile strips 0.5 to 12mm in joints of Floor & Wall Panelling Rate shall be inclusive fixing as per design and architect suggestion. Contractor shall provide shop drawing for approval of Architect.work complete incuding all type of tools, tackles, scaffolding etc complete |
| 389 | Supply Installation testing commisioning of Sleek System for Glass Partition(Fixed Glass Partition)-Demountable type. Supply & Insallation of aluminium profile with Clip- on / U-Section of size 30mm x 21mmOR 45x25 / 20 (or as per standard manufacturers sizes as per list of makes) having section thickness of 2.5 mm in matt black/ natural Alu finish with suitable gaskets for insertion with 10mm thick clear toughened glass. It consists of two way Polycarbonate I profiles, 90 Degree L Junction and T Junction profiles. Transparent profile to be applied on the glass shim for glass wall systems Supplied with double sided adhesive tape. Profile to be inserted in the joint instead of sealing to give continuity glas effect and suitable fasteners for fixing profiles.Partitions system to be in a 50-60 micron in powder coating that has very good scratch resistance properties and wide range of pearlescent colour options only the area below false ceiling shall be measured for purpose of payment.Makes:A2Z Infra Solutions / BWS / Urban Space/Saint Gobain |
| 390 | Patch fitting Glass Door Supply & Installation of Patch Fitting Door with Glass Door Package - W/Lock SS, Glass door along with floor spring complaint with ANSI A156.4 including Bottom Patch, Top Patch, Corner lock and Top Pivot, with D-Type Pull Handle of size 300x22mm SS304 material with 10mm toughened glass, Makes:A2Z Infra Solutions / BWS / Urban Space/Saint Gobain |
| 391 | Patch Fitting Glass Door with size W 900mmx H2400mm |
| 392 | Patch Fitting Glass Door with size W 1050mmx H2400mm |
| 393 | Supply & Installation of Patch Fitting Door with Glass Door Package - With Lock SS, Glass door along with floor spring complaint with ANSI A156.4 including Bottom Patch, Top Patch, Corner lock and Top Pivot, with Pull Handle of size 300x22mm SS304 material with 10mm toughened glass, Patch Fitting Glass Door size-1200 MM x2400 MM |
| 394 | Providing and fixing white vitreous china extended wall mounted water closet of approved shape including providing and fixing of metropole flush valve dual flow 32mm size (concealed body) with exposed shut off provision & round flange (3.0/6.0 lts. per flushing),including sheet cover , and cistern fittings(including Concealed cistern , flush plate ), nut bolt gasket,chair etc complete. ( MAKE-1:KOHLER Cat. No. 72987IN-S-O OR EQUIVALENT) |
| 395 | Providing and fixing white vitreous china sensor operated urinal having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. ( MAKE-1: KOHLER K-4978IN-ER-0 OR EQUIVALENT) Urinal sensor DC: 24199IN-C01-CP, |
| 396 | Providing and fixing white vitreous china Oval shaped wash basin for top counter mounting with 15 mm C.P. brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereever required. White Vitreous China Oval shaped Wash basin size 591 x 540 x 210mm with 15mm CP Brass single hole basin mixer (MAKE-1: KOHLER K-77171IN-0 OR EQUIVALENT) |
| 397 | Providing , Fixing , Wall/table mounted sensor tap for tabletop washbasins with tap hole with flow volume of 3.8 l/min approx. with mains operation complete with all accessories as required and making good the walls wherever required. (MAKE-1 KOHLER 18656IN-ND-CP, OR EQUIVALENT) |
| 398 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Dim: 510x1040mm bowl depth 250mm |
| 399 | Providing and Fixing CP Brass Health Faucet with 8 mm dia and 1200 mm long PVC Flexible tube and wall hook / wall bracket with NRV back flow preventer with 2 nos CP round wall flange and CP Brass Screws and Rawl plugs all other required accessories Complete in all respect as per direction of Engineer - in - charge . ( MAKE-: KOHLER 12927IN-CP, OR EQUIVALENT.) |
| 400 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. MAKE: KOHLER K-75823IN-CP OR EQUIVALENT |
| 401 | Providing & fixing toilet paper holder C.P. brass MAKE: KOHLER K-5633IN-CP OR EQUIVALENT |
| 402 | Providing and Fixing CP Brass Towel Ring Round Shape with 2 nos CP round wall flange and CP Brass Screws and Rawl plugs all other required accessories Complete in all respect as per direction of Engineer - in charge . ( MAKE-: KOHLER, K-5631IN-CP: OR EQUIVALENT.) |
| 403 | Providing and fixing of C.P.brass twin coat/robe hooks fixed on toilet door with C.P. brass screws. (MAKE-: KOHLER,K-25073IN-CP: OR EQUIVALENT.)) |
| 404 | Providing and fixing C.P. brass stop cock ( concealed) of standard design and of approved make conforming to IS: 8931. |
| 405 | Providibng and fixing straight type Macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of KOHLER with integral single mould sealing fins made of flexible EVA body, including bush/adaptor for use with C.I. Pipe as supplied with the pan connector. (MAKE-: KOHLER,K-1046327-S OR EQUIVALENT.)) |
| 406 | Providing and fixing SS Grating of 125 mm dia of approved quality and colour complete as per direction of engineer in charge. Circular Type 125 mm nominal dia with 25 mm waste hole |
| 407 | Providing and Fixing Stainless Steel Material Grade SS - 316 Grab Bar 600 mm Long with 2 nos CP round wall flange and CP Brass Screws and Rawl plugs all other required accessories Complete in all respect as per direction of Engineer - in - charge . ( MAKE-: KOHLER,K-10701D-CP: OR EQUIVALENT. |
| 408 | Providing and Fixing floor trap of self cleansing (100mm x 100mm) design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors |
| 409 | Providing and Fixing floor drain of self cleansing(100mm x 63mm) design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors |
| 410 | Providing and fixing of fully automatic \\"NO TOUCH\\" hand drier suitable to operate on 220 volts, single phase 50 hz, A.C. power supply and directly plugged to power point complete. MAKE-: KOHLER, K-5486T-2-0P: OR EQUIVALENT. |
| 411 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(MAKE-1: ASTRAL, MAKE-2:ASHIRWAD) |
| 412 | 15 mm nominal bore |
| 413 | 20 mm nominal bore |
| 414 | 25 mm nominal bore |
| 415 | Providing and fixing C.P. brass Short body bib Tap of approved quality conforming to IS:8931 : 15mm nominal bore MAKE : KOHLER K-20073IN-4-CP OR EQUIVALENT |
| 416 | Providing and fixing CP brass angle valve for basin mixture and geyser points of approved quality confirming to IS: 8931. MAKE : KOHLER K-80154IN-4AV-CP OR EQUIVALENT |
| 417 | Cutting holes up to 150 mm diameter in reinforced cement concrete floors, slabs, roofs and walls for passing drain pipes, rain water pipes, sanitary pipes and similar works, including careful cutting without damaging reinforcement, making good the disturbed portion after fixing of pipe with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including centering, shuttering, finishing, curing and making the area completely watertight and leak proof, complete in all respects as per direction of Engineer-in-Charge. |
| 418 | Cutting holes up to 300 mm diameter in reinforced cement concrete floors, slabs, roofs and walls for passing drain pipes, rain water pipes, sanitary pipes and similar works, including careful cutting without damaging reinforcement, making good the disturbed portion after fixing of pipe with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including centering, shuttering, finishing, curing and making the area completely watertight and leak proof, complete in all respects as per direction of Engineer-in-Charge. |
| 419 | Providing and fixing uPVC agricultural pipes conforming to IS:4985 Class V (10 kg/sqcm) including all fittings, e.g. couplings, tees, bends, reducers and screwed adoptors jointing with solvent cement joint as per manufacturers' recommendations. [for soil and waste Pipes] (MAKE-ASTRAL/ SUPREME OR EQUIVALENT) |
| 420 | 110 OD |
| 421 | 75 OD |
| 422 | 63 OD |
| 423 | 50 OD |
| 424 | 40 OD |
| 425 | Dry cleaning and refixing of existing vertical blinds / roller blinds of different sizes, including careful dismantling of blinds from existing location, transportation to cleaning area, dry cleaning by approved method without damaging fabric/slats/mechanism, removal of dust, stains and foreign particles, and refixing the same at original location by all means to ensure smooth, safe and proper functioning. The work shall include reinstallation, alignment, checking of operation, minor adjustments required for smooth movement and proper fitting of blinds. Any replacement of damaged parts, mechanism, cord, chain, motor or accessories shall be measured and paid separately. |
| 426 | Repairing, servicing of the floor springs including the replacing oil and it screw etc, required for smooth operation of the same , complete as per direction of EIC. The payment of any kind of any part any other which is required for safe and smooth functioning will be paid separately. |
| 427 | Providing and fixing concealed door closer of approved make, with adjustable closing speed and latching action, including necessary accessories, screws, fasteners etc. complete, as required and as directed by Engineer-in-Charge. (Häfele make or equivalent approved make). |
| 428 | Brass dead bolt of approved quality, of Godrej make or equivalent approved make, complete with necessary screws, fittings, fixtures and accessories etc., as required and as directed by Engineer-in-Charge. |
| 429 | Supplying stainless steel mortise lock handle pair of approved quality, of Godrej make or equivalent approved make, complete with mortise lock body, keys, necessary screws, fittings, fixtures and accessories etc., as required and as directed by Engineer-in-Charge. |
| 430 | Supplying M-Seal epoxy compound of approved make and quality, two-component cold welding/epoxy sealing compound suitable for arresting leakage in pipes, joints, sanitary fittings, cracks in masonry, metal repairs and general maintenance works, supplied in proper sealed packing with manufacturer’s instructions. EA - 25 gm |
| 431 | Supplying synthetic enamel paint of approved make and quality, ready mixed, oil based, high gloss/matt finish as specified by EIC, suitable for application on wood, metal and masonry surfaces, having good covering capacity, durability and weather resistance, in required shades as approved by Engineer-in-Charge. Paint shall be supplied in sealed containers of standard packing including all manufacturer’s labels, batch details and shall conform to IS specifications. |
| 432 | Supplying white cement based wall putty of approved make and quality, polymer modified, smooth finishing material suitable for application on internal and external plastered surfaces for filling pores, cracks and providing uniform base for painting, conforming to IS standards, supplied in sealed moisture-proof packing complete in all respects. |
| 433 | Supplying shellac (natural resin) of approved quality, refined/bleached grade as specified, suitable for wood polishing, French polishing work, sealing, and decorative finishing applications, supplied in solid flakes/granules form, complete in sealed packing with manufacturer’s details. |
| 434 | Supplying denatured spirit (methylated spirit) of approved quality, clear, colourless, highly volatile solvent suitable for cleaning, polishing (shellac work), degreasing metal surfaces, thinning of shellac and general maintenance works, supplied in sealed containers complete with manufacturer’s label and safety markings. |
| 435 | Supplying drain cleaning powder of approved quality, suitable for clearing choked kitchen sinks, wash basins, floor traps and internal drainage lines, capable of dissolving grease, hair and organic waste, complete in sealed packing with manufacturer’s instructions and safety labels. Make - Dr. Drain / Dr. Fixit Drain Cleaner / Harpic Drain Gel/ Drainex 50 gm packet |
| 436 | Supplying and fixing 9V alkaline battery of approved make (Duracell/Eveready) for sensor-operated urinal flushing system complete as required, including checking of sensor operation, removal of old battery if required, and all incidental charges. Battery shall be heavy duty long-life type suitable for urinal sensor fittings of brands such as Jaquar, Kohler, or equivalent. |
| 437 | Providing and fixing heavy duty long-life AA/AAA batteries of approved make such as Duracell / Eveready in blind remote controls and sensor taps, including checking proper operation of sensors/remotes, removal and disposal of old batteries if required, complete fixing, testing and all incidental charges, as directed by Engineer-in-Charge. |
| 438 | Supplying lithium coin cell battery CR2450 of approved make, 3V power rating, long life lithium manganese dioxide battery suitable for use in remote controls, sensors, wall clocks, electronic locks, automatic systems, urinal sensors and similar electronic devices, complete in sealed blister packing with proper manufacturer markings. Make - Duracell/ Eveready or equivalent |
| 439 | Providing and applying Duco paint finish on fire rated steel doors/shutters and frames including complete surface preparation by cleaning, scraping rust/scales, rubbing with emery paper/sand paper, filling minor surface imperfections with approved metal putty, cleaning dust and grease, application of suitable metal primer (if required), undercoat and finishing with Duco paint of approved shade and make such as Berger Paints / Asian Paints or equivalent, complete in all respects. The work shall include proper masking, covering and protection of adjoining walls, floors, hardware, vision panels, fittings and surrounding areas with approved protective materials during execution. Finished surface shall be smooth, uniform, even and free from brush marks, runs, patches and defects as per specifications and directions of the Engineer-in-Charge (EIC). Item includes all labour, materials, consumables, tools, tackles, scaffolding and incidental charges complete. |
| 440 | Providing and laying wooden Engineered flooring of approved make as per manufacturer specification with special sound reduction underlay and PE film as per manufacture specifications. The plank size should be 1860mm x 148mmx 14 mm having joint guard joint protection system and patented EIR synchro surface finish. Item also includes skirting all around of same specification. The plank should have glue less click insulation system arrangement. All joints to be filled with click guard joint sealing system for extra joint strength and moisture protection. The floor is to be finished with all accessories required complete as directed by Engineer-in- Charge in approved colour -OAK Cofee Bean. (Pergo, Green Mikasa) (Base price Rs. 300/ SFt without tax) |
| 441 | Skirting of the same as of above with 100mm Wooden Skirting |
| 442 | Providing and fixing 4 mm thk premium veneer ( Greenply, Century, Archid ply, Duro or equivalent make) including preparation of surface, applying adhesive (Fevicol/vamicol), applying laquer on decorative plywood vineering etc as per design/ details of grooves all complete as per drawings, specifications and as per approved by EIC. |
| 443 | 4 mm thick veneer (Base price - Rs. 200-275/ sft) |
| 444 | 4mm thick veneer (Base price - Rs. 325-350-/ sft) |
| 445 | 4 mm thick veneer (Base price - Rs. 625-650/ sft) |
| 446 | Providing and carrying out Polyurethane (PU) polish finish on veneer surfaces, wall cladding, table tops or other approved wooden surfaces, including complete surface preparation by cleaning, rubbing and smoothening with appropriate grade emery/sand paper, filling minor surface imperfections with approved wood filler, application of sealer coat, intermediate sanding with higher grit sand paper and application of one or more coats of PU polish of approved shade and finish to achieve smooth, uniform and glossy appearance. The item shall include all necessary materials, approved hardener/thinner, tools, masking and protection of adjoining surfaces, proper curing, final touch-up and cleaning complete. Finished surface shall be free from scratches, patches, waviness and brush/spray marks, complete in all respects as per drawings, specifications and directions of the Engineer-in-Charge (EIC), including all labour, materials, consumables, tools, tackles and incidental charges. |
| 447 | Providing and fixing in position 8–10 mm thick designer finished charcoal louvers / decorative panels (Euro Pratik / Ventura or approved equivalent make and design) on approved marine ply backing and MS/wooden frame work (frame and ply to be measured and paid separately under relevant item). The work shall include cutting, aligning, fixing, adhesive/fasteners, joint finishing, necessary level corrections, and all required hardware to ensure proper installation as per manufacturer’s specifications and architectural drawings. The work shall be carried out to the complete satisfaction of the Architect and Engineer-in-Charge. Note: Base rate of decorative board shall be considered as ₹300–₹350 per sq. ft. excluding taxes. |
| 448 | Conveyance charges for round trip per visit for resource for travel from GAIL Bhawan / PNB Building / WTC office to various locations and back, as per directions of Engineer-in-Charge, including all incidental expenses complete. |
| 449 | Up to 20 km (round trip) |
| 450 | Above 20 km and up to 30 km (round trip) |
| 451 | Above 30 km and up to 50 km (round trip) |
| 452 | Providing & fixing of Acoustical wall panels of Armstrong OPtra or equivalent as per drawings & specifications & approved make ,sample & colour of sizes 600mm x 1200 mm.The panel have square shaped edges with acoustical infill panel of rock wool covered with a special fire resistant fabrics installed over partition with studs or adhesive by using a gun-dispenser on the back of the panel.Impalers ,J or Z splines can be used to create an exposed system. The NRC should be considered as 0.9 . All complete as per instructions & directions of Architect/ EIC. |
| 453 | Supply and fixing of (8-12 mm) thick (or as approved by Engineer-in-Charge) clear toughened glass for table top or as directed at site, including cutting to required size and shape, edge grinding, bevelling/polishing of all exposed edges, drilling of holes where required, and fixing in position with approved rubber pads, silicone sealant, spacers, clamps, or suitable adhesive as per site requirement and manufacturer’s specifications. The item shall include all labour, tools, tackles, transportation, loading/unloading, and necessary consumables required for proper installation at site. The work shall be executed in true line, level, and alignment, complete in all respects to the satisfaction of the Engineer-in-Charge. Measurement shall be taken in square feet of finished installed glass area. |
| 454 | Providing and installing in position motorised curtain track system suitable for curtain weight up to 60 kg and length up to 6–7 m, in place of manual curtain system complete with all necessary accessories such as aluminium track, silent motor, remote control unit, manual override system, master carrier, runners, ripple fold carriers, rubber belts, brackets, end stops, power connection accessories, and all other required fittings for smooth and noiseless operation. The system shall be compatible with home automation, where required, and shall be installed strictly as per manufacturer’s specifications, drawings, and instructions of the Engineer-in-Charge. The item includes supply, installation, testing, commissioning, necessary wiring up to power point (excluding main power supply point), all labour, tools, tackles, transportation, scaffolding, and consumables required for complete execution. Curtain fabric shall be measured and paid separately under relevant item. The work shall be completed in all respects to the satisfaction of the Engineer-in-Charge. Make - Somfy / Galaxy / Mac / Hunter Douglas or equivalent |
| 455 | Providing and fixing polyester / cotton polyester mix decorative sheer fabric curtains with powder coated aluminum curtain /drape tracks with pvc cord rope arrangement. The Upper side of the curtain will have buckram lining (2-3 inch) and top hems of 75mm to 100mm width. Bottom hems shall be 75 mm to 100 mm width and are to be double-turned to consist of layers of fabric and be blind stitched . Lead weights shall be securely sewn at each seam and at the corners. Side hems shall be double-turned 1 ½ inch wide and be blind stitched so that stitches are not visible on the face of the fabric. All vertical seaming shall be sewn with a twin-needle machine with selvage trimmed and over locked. Drapery heading shall be fabricated so that the permanent finish buckram shall be double-folded into the heading (3 thicknesses of fabric) and sewn with either clear monofilament or triple-strand polyester thread, colour matched to the fabric used. The bottom of the buckram shall be sewn to the face of the fabric. The curtain shall have pleats gathered in the set of 3 separated by 125-175mm c/c. The rates are inclusive of cloth, transportation, stitching, curtain tracks, consumables etc all complete as per direction of EIC. The payment shall be made on the finished elevation area of the curtain without any provisions for pleats, hems, folds, cuttings , lapping etc.The basic cost of the sheer curtain cloth shall be min Rs 1200 /- per m for 48/52 inch width. Make - D’Decor, Bombay Dyeing, Maspar, Jagdish Store |
| 456 | Providing and fixing polyester / cotton polyester mix decorative fabric curtains with powder coated aluminum curtain /drape tracks with pvc cord rope arrangement. The Upper side of the curtain will have buckram lining (2-3 inch) and top hems of 75mm to 100mm width. Bottom hems shall be 75 mm to 100 mm width and are to be double-turned to consist of layers of fabric and be blind stitched . Lead weights shall be securely sewn at each seam and at the corners. Side hems shall be double-turned 1 ½ inch wide and be blind stitched so that stitches are not visible on the face of the fabric. All vertical seaming shall be sewn with a twin-needle machine with selvage trimmed and over locked. Drapery heading shall be fabricated so that the permanent finish buckram shall be double-folded into the heading (3 thicknesses of fabric) and sewn with either clear monofilament or triple-strand polyester thread, colour matched to the fabric used. The bottom of the buckram shall be sewn to the face of the fabric. The curtain shall have pleats gathered in the set of 3 separated by 125-175mm c/c. The rates are inclusive of cloth, transportation, stitching, curtain tracks, consumables etc all complete as per direction of EIC. The payment shall be made on the finished elevation area of the curtain without any provisions for pleats, hems, folds, cuttings , lapping etc. The basic cost of the fabric shall be min Rs 1350 /- per m for 48/52 inch width. Make - D’Decor, Bombay Dyeing, Maspar, Jagdish Store |
| 457 | Providing & fixing black out roller blinds manufactured from dust & stain repellant polyster fabric in specified width of approved design & shade of make complete with control unit, idler, head rail, brackets, operating chain, roller tube & load bar etc. complete as per manufacturer's specifications. (Payment shall be made for the finished area. Height of the curtain/ blinds shall be taken in open position from the top of the headrail to the bottom of the curtain.) The blinds to be fixed and commissioned as per manufactures specification. Rate shall be including wastage as per design & direction no extra payment shall be paid for wastage. ( Basic rate of blinds with all item required for blinds- Rs 2500/- Per Smt. ) Make - D’Decor, Bombay Dyeing, Maspar, Jagdish Store |
| 458 | Extra for providing and installation of motorised roller blinds( size approx 2.5m X 2.7m ht) instead of manual blinds, motor should be silient type with lifting power of 40 kgs (min). The motor shall be operated by switch or remote controls and shall be compatable for automation . The devices shall be provided all complete with necessary fixtures, adaptors etc for 230 volt , 60 HZ electrical supply. (payment for remote shall be extra) |
| 459 | Providing and supplying remote control system for operation of motorised roller blinds, including handheld remote (multi-channel/single channel as required), compatible receiver/control unit, necessary programming, pairing with existing motors, wiring connections (if required), and commissioning for smooth operation of blinds. The item shall also include supply of batteries, wall holder, and all necessary accessories required for complete and functional remote operation system. The system shall be fully compatible with existing motorised blind systems of approved makes such as Somfy / Galaxy / Mac / Hunter Douglas or equivalent |
| 460 | Providing and fixing wallpaper of approved make, shade, and pattern on MDF / Gypsum board / POP punning base backing, including surface preparation to receive wallpaper, application of adhesive as per manufacturer#s specifications, alignment, trimming, and finishing, complete in all respects as per drawing and as directed by the Engineer-in-Charge. The wallpaper shall be free from air bubbles, wrinkles, or visible joints and fixed with proper workmanship. Make - D’Decor, Marburg, AS Creation, Zoffany, Harlequin, Nilaya by Asian Paints, Marshalls or equivalent |
| 461 | Providing, fabricating, and fixing temporary site barricading around construction/working areas using approved quality wooden battens/framework, plywood backing, and printed flex sheet with approved artwork/text/message as directed by the Engineer-in-Charge. The barricading shall be adequately supported and fixed firmly to withstand wind and site conditions, complete with necessary nails, screws, clamps, supports, bracing, fastening arrangements, and all accessories required for proper installation. The item includes supply of all materials, digital printing of flex with safety/informational graphics and text, installation, maintenance during construction period, shifting if required, and dismantling after completion of work, including all labour, tools & tackles, transportation, loading/unloading, scaffolding, and consumables complete as directed by the Engineer-in-Charge. The work shall be executed in true line and level and maintained in good condition throughout the contract period to the complete satisfaction of the Engineer-in-Charge. Measured in square feet of visible barricading surface area completed at site. |
| 462 | Supplying and fixing brass door stopper of approved quality, made of solid brass body with rubber buffer tip, floor/wall mounted type as required, complete with stainless steel screws, rawl plugs and all necessary accessories for proper fixing and smooth operation. |
| 463 | Supplying and fixing stainless steel name plates of SS-304 grade, brushed/matt finish, of required size and thickness, with laser engraving in English and/or Hindi characters filled with black/red enamel paint as approved. The work shall include cutting, polishing, engraving, colouring, backing, studs/screws/adhesive for fixing on wall/door/board and all necessary accessories complete in all respects. |
| 464 | Supplying and fixing brass name plates/boards of approved quality, made from solid brass sheet of required thickness, polished/mirror finish, with laser/chemical engraving of text in English and/or Hindi, filled with black/red enamel paint as approved. The item shall include cutting, shaping, polishing, engraving, colouring, studs/screws, spacers, adhesive and all necessary fixing arrangements complete in all respects. |
| 465 | Supplying and fixing PVC name plates with slider pocket of approved quality, made of high density rigid PVC sheet/foam board of required thickness, with printed/UV printed or vinyl pasted lettering in English and/or Hindi, as approved. The work shall include cutting to size, edge finishing, printing, backing support, screws/studs/adhesive and all necessary fixing arrangements complete in all respects. |
| 466 | Supplying and fixing 3D signage/logo comprising 12 mm thick stainless steel letters with golden matte finish, fabricated in approved font and design, size approximately 4\\" height × 30\\" overall length, including laser cutting, bending, polishing, necessary backing support, studs, spacers, adhesive, screws and fixing arrangement complete as required for installation on wall/panel surface. Per- Job |
| 467 | Supplying and fixing pedestal lock suitable for office table pedestal drawers, made of high quality brass/zinc alloy body with nickel/chrome finish, cam locking mechanism, including 2 keys, fixing screws, and necessary accessories complete as required.Type: 3/4 lever / multi-lever cam lock suitable for wooden/metal pedestal drawers. Make Godrej/Hettich or equivalent |
| 468 | Providing and fixing approved make concealed soft close auto-close hinges (all crank type) complete with mounting plate, screws and all necessary fittings suitable for modular kitchen, wardrobe and cabinet shutters, including cutting of 35 mm cup hole, alignment and testing complete, as directed by Engineer-in-Charge. Make Godrej/Hettich |
| 469 | Supplying and fixing mortise lock with lever handle set suitable for doors, of approved make Godrej/Dorset or equivalent, made of high quality brass/stainless steel/ zinc alloy body with satin/chrome/SS finish, heavy duty locking mechanism suitable for high traffic use, including lock body, cylinder, key set (minimum 3 keys), internal–external lever handles, strike plate, screws, spindle and all necessary accessories complete in all respects. |
| 470 | Providing and fixing modular kitchen basket fittings made of stainless steel grade SS-304 with minimum 1.0 mm thick wire/plate, matt/satin finish, including telescopic/heavy duty channels, screws, brackets, SS patti, runners, necessary hardware and accessories complete as required for fixing in kitchen cabinets of approved make and design. The item includes installation of basket units such as cutlery basket, thali basket, cup & saucer basket, plain basket, bottle basket, tandem basket, corner basket etc., complete in all respects. Make - Hafele / Hettich / Ebco / Godrej or equivalent. |
| 471 | Supplying Fevicol HeatX heat resistant synthetic resin adhesive suitable for kitchen cabinet laminations, shutters, vertical applications and heat-prone areas, having heat resistance up to 170°C, fast bonding and quick setting properties, complete in all respects as approved by Engineer-in-Charge. |
| 472 | Supplying heavy duty transparent grip tape made of clear acrylic/nano PU material with strong double side adhesive properties, washable and reusable type, suitable for fixing glass, ACP sheets, mirrors, PVC panels, kitchen accessories, decorative items and general mounting applications, complete as approved by Engineer-in-Charge. Make - Oddy / Wonder Tape / Nano Grip / Duck or equivalent. |
| 473 | Supplying urinal sensor with I-plate of approved make Jaquar/Kohler, battery/electrically operated infrared sensor type automatic flushing system complete with sensor plate, concealed/exposed flush valve body, control unit, solenoid valve, connecting accessories, fixing hardware and all necessary fittings required for proper functioning, complete as approved by Engineer-in-Charge. |
| 474 | Supplying solenoid valve suitable for automatic urinal flushing sensor system, electrically operated brass body solenoid valve with coil, diaphragm, inlet/outlet connections, compatible with sensor-operated flushing units, complete with all necessary fittings and accessories as required for proper functioning. Make Jaquar/Kohler or equivalent |
| 475 | Supplying WC seat cover hinges of approved make Jaquar/Kohler, made of stainless steel/high grade engineering polymer with chrome finish, suitable for EWC seat covers, including fixing accessories, screws, buffers and all necessary hardware complete as required. EA = Set Make Jaquar/Kohler or equivalent |
| 476 | Supplying and providing toilet cleaning vacuum pump / heavy duty rubber suction pump (plunger type) of approved quality, suitable for clearing blockage in WCs, urinals and floor traps, made of heavy duty rubber cup with strong wooden/plastic/steel handle, providing high suction pressure for effective de-choking of sewer lines, complete as required. |
| 477 | Supplying stainless steel waste pipe of approved quality, suitable for wash basin/sink/urinal connections, made from SS-304 grade with chrome/matt finish, including necessary nuts, flanges, washers and fixing accessories complete as required. Flexible type |
| 478 | Repairing and servicing of motorised window blinds, including checking, dismantling (if required), fault diagnosis, repairing/replacement of motor, control unit, remote receiver, wiring connections, alignment of blind fabric/slats, lubrication, re-fixing and testing for smooth and noiseless operation, complete in all respects as per site requirement and manufacturer’s specifications. |
| 479 | Supplying and fixing telescopic drawer channels of size 16\\" to 20\\" (400 mm to 500 mm) of approved make, heavy duty full extension type, made of high quality cold rolled steel with ball bearing mechanism for smooth and noiseless movement, complete with screws, brackets and all necessary fittings for proper installation in drawers, kitchen cabinets, wardrobes and furniture units. Make - Hettich/ Godrej/ Ebco / Ozone / Hafele or equivalent approved make. Set includes left and right channels, Proper alignment and smooth operation to be ensured after fixing. EA = set |
| 480 | Supplying and fixing door sealing strips (door seals) of approved quality, made of high-grade rubber suitable for wooden, steel and aluminium doors, fixed along door frame or shutter to prevent dust, noise, light, air leakage and insects, complete with necessary adhesive, screws and fixing accessories as required. |
| 481 | Supplying and fixing decorative mirrors of approved quality, made of superior quality float glass mirror with polished edges, provided with decorative brass edge framing (round/corner or as approved by Engineer-in-Charge), complete with necessary backing board, concealed fixing arrangements, adhesive, screws, spacers and all required hardware for proper installation. Mirror shall be of required shape (round / square / rectangular / custom profile) and size as directed at site. Premium designer brass edge mirror |
| 482 | Supply of decorative handles for doors/cupboards of approved design and size, of approved make such as Jolly, Qubo, Godrej or equivalent approved brand/manufacturer, at site including all fixtures, screws, accessories, transportation, loading/unloading, all applicable taxes, duties, and incidental charges, complete in all respects and as directed by the Engineer-in-Charge (EIC). |
| 483 | 4\\" to 6\\" |
| 484 | 8\\" to 12\\" |
| 485 | Providing and fixing large format vitrified tiles of size 1200 mm × 2400 mm of approved make such as Kajaria Ceramics / Somany Ceramics or equivalent approved manufacturer, of required shade, thickness and finish (glazed / polished / full body as specified), conforming to relevant IS standards, in flooring / wall cladding as required, laid over cementitious adhesive of approved make (flexible polymer modified tile adhesive suitable for large format tiles), including surface preparation, levelling of base, back buttering of tiles, spacers, alignment, proper jointing, grouting with epoxy / polymer grout of matching shade, cutting, wastage, scaffolding (for wall application), curing, cleaning and protection of finished surface, complete in all respect as per drawings and directions of Engineer-in-Charge (EIC).” |
| 486 | Providing and fixing carpet flooring of approved make, quality, colour, pattern and texture, comprising machine-tufted/machine-woven carpet manufactured from nylon/polypropylene/wool blend yarn design and make as approved by EIC, having minimum pile height of 6 mm, total thickness not less than 8 mm and pile weight as specified, laid over existing prepared floor surface with approved quality synthetic underlay wherever required, fixed with approved solvent-free acrylic adhesive/double-sided tape system/ leather beading around edges as per manufacturer's specifications. The work shall include surface cleaning and preparation, measurement, marking, cutting to required sizes and shapes, laying in proper alignment and pattern, matching of joints and seams, edge trimming, stretching, fixing around columns, corners, skirting, ducts and other obstructions, providing approved aluminium/brass/PVC transition strips at doorways and junctions with other flooring materials, finishing edges neatly, removal of surplus material, cleaning of stains, and handing over the completed work in perfect condition. The carpet shall be free from wrinkles, bubbles, unevenness and visible seam lines and shall be laid true to line, level and pattern. The item includes all labour, materials, adhesives, accessories, wastage, tools and plants, scaffolding if required, loading, unloading, transportation, leads and lifts, testing and quality control, complete in all respects as directed by the Engineer-in-Charge. Rectangular area of the carpet shall be measured. Make - Jagdish Store, IDUS, Jaipur Rugs or equivalent makes as approved by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender