Tender For Special Repair To Road From P-309 To P-160 (Lrw) Of Asc Bn Under Ge Gangtok.
Tender Value
13.50 Lakhs
Estimated cost
Bid Submission
02 Oct 2026
11 days left
EMD
27000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gangtok → sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Road From P-309 To P-160 (Lrw) Of Asc Bn Under Ge Gangtok.
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 sqm, depth not exceeding 50mm and segregation materials stacking for reuse and remove from the site of work complete all as specified and as directed. |
| 2 | M&L for 100 mm thick (spread thickness) soling (or sub base) with broken boulders or quarried stone inter stices filled, surface formed and rolled and consolidated to required gradient and camber required using 8 to 12 tonne power mechanical road roller, complete all as specified and directed. |
| 3 | M&L 150 cm thick (Compacted thickness) WBM in two layer (75 mm in each layer) with Granite, trap or Basalt, coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required using 8-12 tonne power road roller, complete all as specified and directed. |
| 4 | M&L 7.5 cm thick (Compacted thickness) WBM with Granite, trap or Basalt, coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required using 8-12 tonne power road roller, complete all as specified and directed. |
| 5 | Preparing unsurface WBM by brushing with wire brushes for removing caked mud etc sweepijng with brooms and finally fanning the cleaned surface with gunny bags / by mechanical means to remove all loose dirt etc., complete all as specified and as directed. |
| 6 | M&L for applying evenly a priming / tack coat with bitumen primer using paving bitumen of grade 10 Pack (VG-10) @ 10 Kg per 10 sqm on WBM surface complete all as specified and as directed. |
| 7 | M&L for premix bituminous macadam using paving bitumen of grade 30 Pack (VG-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed. |
| 8 | M&L for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweepijng with brooms and finally fanning the cleaned surface with gunny bags / by mechanical means to remove all loose dirt etc., complete all as specified and as directed. |
| 9 | M&L for applying evenly a priming / tack coat with bitumen primer using paving bitumen of grade 10 Pack (VG-10) @ 5 Kg per 10 sqm, complete all as specified and as directed. |
| 10 | M&L for 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 Cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqm of binder using paving bitumen grade 30 Pack (VG-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed. |
| 11 | M & L for Premixed Sand seal caot with 0.06 cum sand mixed with 6.8 kg bitumen, applied and rolled to a uniform smooth surface in paving bitumen complete all as specified and directed |
| 12 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 13 | M&L for 150mm thick plain cement concrete(1:4:8), type D-2, (using 40mm graded stone aggregate) as in sub-base, sub-floors, floors, pavings etc, all as specified and as directed. |
| 14 | M&L for 100mm thick cement concrete type B-2, 1:2:4 (using 40mm graded stone agg) as in floors, sub-floors, sub-base, pavings, laid in panels etc all as specified and directed. |
| 15 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates.Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender