Tender For special Repair To Road Including Road Shoulders At Rimc Dehradun
Tender Value
38.80 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
5 days left
EMD
77600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Road Including Road Shoulders At Rimc Dehradun
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Scarifing or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 Sqm and depth n exc 50 mm & removing from site complete all as specified and directed. |
| 2 | M&L for providing 150mm thick (spread thickness) soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber using 8 to 10 Ton power road roller complete all as specified and directed. |
| 3 | M&L for providing 150mm thick WBM in two layers each layer 75mm thick with coarse aggreagate granite trap or basalt of grading 2 spread rolled and consolidated to gradient and chamber with 8 to 10 Ton power roller complete all as specified and directed. |
| 4 | M&L for preparing of un surfaced water bound macadam by brushing with wire brushes for removing caked mud etc. and sweeping with mechanical broomers and finally fanning the cleaned surface with air compressors to removed all loose dirt and applying evenly priming/tack coat with bituminous primer @ 10Kg/10 sqm using viscosity grade Bitumen VG-10 complete all as specified and directed. |
| 5 | M&L for Premix bituminous macadam (consolidated thickness 75 mm or less) with 4% binder content by weight of total mix using viscosity grade Bitumen VG-30 any penetration, laid/rolled and compacted to rquired gradient and camber using power road roller complete all as directed and directed. |
| 6 | M&L for preparing black to surface by brushing with wire brushes for removing caked mud etc sweeping with mechanical broomer and finally fanning the cleaned surface with air compressors to removed all loose dirt and applying evenly priming/tack coat with bituminous primer @ 5Kg/10 sqm paving bitumen VG-10 complete all as specified and directed. |
| 7 | M&L for bituminous premix asphaltic semi-dense concrete 30mm consolidated thickness using viscosity grade bitumen VG-30 with 5.5% binder content by weight of total mix, laid by mechanical paver, rolled and compacted with vibromatic roller to required camber and gradient complete all as specified and directed. |
| 8 | M&L for repair to pot holes any depth, not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm in depth, making good by applying tack coat with bituminous primer using paving bitumen (VG-10) @ 5kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm using viscosity grade bitumen VG-30, blinded with 0.09 cum of stone chippings 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chips). depth of potholes exc 30 mm complete all as specified and directed. |
| 9 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and ditected. |
| 10 | M&L Brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 11 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 12 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed. |
| 13 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 14 | M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. |
| 15 | M & L for prepolished coloured (Red/ Yellow) machine pressed/ Vibromatic precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all as specified and directed. |
| 16 | M & L for sand filling under floors or in foundations excluding watering and consolidation complete all as specified directed. |
| 17 | M & L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate for side packing of paver block (of any section indicated) with plain fair faces and the like edge slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 18 | M&L for Ashlar masonry with dressed stone of size 100x100x200mm, facia of masonry will be ground on the face of 100x100mm, hammer dressed stone used in masonry, built in cement mortar 1:6 complete all as specified and directed. |
| 19 | M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minium 2.5mm thick single coat as in centre line and edge line road marking of 100/150mm width using 'HOT MARK' thermoplastic paint (Hot application) white/yellow by indigenous modern proplled road marking machine as directed including all ingredients such as blinder, glass beads, Titanium dioxide clacium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions and as directed by Engr-in-Charge as per IRC-35. |
| 20 | S&F in replacement metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm hight duly powder coated and thermoplastic elastomer 3 bands of green ,red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4, type B-1 block (150 X150 X 300mm ) and necessary earth work complete all as specified and as directed. |
| 21 | S & F in repair solar cat eye (studs) aluminium alloy shall (100% water proofing design according to 65) of size 125mmx125mmx25mm (shank 65 mm) of high efficiency Monou rystafie solar panel 2.4 V/0.3 watt one Ni-ed rechargeable battery (1.2V/1600 MA) consisting of super bright LED with 10,000 to 18000 mcd as per manufactures instructions complete all as specified and directed. |
| 22 | S&F in repair cat eye reflective type of metal body alloy of size 100mmx100mmx20 mm with PAMA striplens reflector of model No . DA 972 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 23 | S&F stainless steel GRDE 304, railing with chain and globe of 100mm dia with fixing arrangement, pipe shall be 75mm dia and height of pipe shall be 1.2mtr fixed/embeded on PCC floor at a distance 1.5mtr each having a hook for chain of stainless steel of dia 25mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender