Tender For Periodical And Mechanised Services Of Md And Otm Accn At Zone C And D Area Of Age B/R-I Under Ge (East) Lucknow
Tender Value
45 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
6 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical And Mechanised Services Of Md And Otm Accn At Zone C And D Area Of Age B/R-I Under Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling complete all as specified & as directed. |
| 2 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of cement base paint complete all as specified & as directed. |
| 3 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of cement base paint complete all as specified & as directed. |
| 4 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of oil emulison distemper (OBD) complete all as specified & as directed. |
| 5 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of oil emulison distemper (OBD) complete all as specified & as directed. |
| 6 | M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 7 | M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed. |
| 8 | M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 9 | M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed |
| 10 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 11 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement motar (1:6) etc all as specified and directed. |
| 12 | M & L for rendering 15 mm thick other than fair faces of brick work or concrete surfaces of wall in cement motar (1:4) etc all as specified and directed. |
| 13 | M & L for rendering 5mm thick in patches in cement mortar in 1:3 on ceiling complete all as specified and directed. |
| 14 | M & L for preparation of newly plaster surfaces of wall and applying two coat of acrylic distemper with one coat of primer on wall/ceiling etc all as specified and directed. |
| 15 | M & L for preparation of newly plaster surfaces of wall and applying two coat of cement base paint with one coat of primer on wall/ceiling etc all as specified and directed. |
| 16 | M & L for preparation of newly plaster surfaces of on ceiling applying three coat white wash all as specified and directed. |
| 17 | M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and directed. |
| 18 | Notes for item No 19, 20, 21 and 22 :-MoU with Manufacturer’s of Paint: (a) Irrespective of whatever specified elsewhere in tender documents, the work shall be got executed through authorized applicator of manufacturer’s Asian Paint Ltd/ / Kansai Nerolac Paints Ltd/ Acro Paints Ltd / Berger Paints India Ltd only. The tri-party agreement between contractor, said manufacturer’s of Paints and their authorized Applicator on Non Judicial Stamp paper of Rs. 100/- (format of MOU shall be provided by department.) Authorised Applicator of above mentioned Paint Manufacturers shall have valid authorization letter from the manufacturers. (b) The MoU shall be submitted by bidders in cover-I (technical bid) along with other requisite documents as per NIT. (c) MoU shall be verified from authorized applicator and Manufacturer’s Authorized delar (if Accepting officer found verification is required). In case of fake MoU found during verification of MoU, the bidder shall be liable for rejection of technical bid and financial bid shall not be opened of such bidders and appropriate necessary disciplinary action shall be taken against firms as deemed fit. |
| 19 | WorkManship procesure of periodical Work:(d) The Contractor shall procure and deposit 100% of the approved quantity of paint (20-litre packs), primer (20-litre packs), and wall putty (20 kg/40 kg packs) from the Approved Company with the Engineer-in-Charge within 15 days of commencement of work along with original GST invoices. (e) The approved paint system shall comprise Nerolac Excel Top Guard Exterior Emulsion / Berger Weather Coat Anti Dust / Asian Paints Apex Exterior Emulsion. (f) The scope under the MOU shall include mechanical scraping, surface preparation including rectification of undulations up to 5–8 mm, application of wall care putty, primer, and finishing coats through the Authorized Applicator only, strictly as per the manufacturer's specifications. (g) Each quarter shall be completed within 7 days from the date of handing over after completion of plaster repairs, if any. Delay beyond the stipulated period shall attract liquidated damages of ₹1,000 (Rupees One Thousand only) per day per quarter and shall be recovered from the Contractor's next due. (h) The OEM shall provide all labour, supervision, ladders, scaffolding, tools and plants, transportation, safety equipment, cleaning, and all incidental arrangements at no extra cost. Quoted unit rate shall be inclusive of T&P, scaffolding, transportation, supervision, or other incidental items and no claim shall be admissible on this account. |
| 20 | M & L for smart periodical services shall be executed thorugh approved applicator (Name of applicator and manufacture shall be approved by GE before commencment of work as per MoU) comprising Complete removal of existing treatment by scrapping with Wall Sander having mechanical vacuum mechanism having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust loose paint etc complete all as specified and directed. |
| 21 | M & L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm, over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and Sanding of the putty surface with wall sander having mechanical vacuum mechanism having RPM not less than 1500, sannding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust complete all as specified and directed. Step 1) Mix the putty powder by adding 40-50% water and mix it with mechanical Putty mixer having power min 1400 W and havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute).Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray putty application machine having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041\\" |
| 22 | M & L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application having an electric motor of min 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes as per manufacturer |
| 23 | M & L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up Resistance with low VOC less than 50 G/L, Anti Algae properties in two coats @ 1.79 ltr (undiluted)/10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray paint application machine having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surface before application of subsequent coats complete all as specified and directed. |
| 24 | M&L for complete removal of existing treatment of cemented surfaces i.e kerb stone etc and applying exterior paint with Silicone additives of required shade Two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqmed. |
| 25 | M&L 1mm thick wall care putty on wall/ceiling surface complete all as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender