Tender For Installation Of Deep Tubewell At Bop Khatmarian Of 07 Bn Bsf Under Shq Bsf Jammu.
Tender Value
6.87 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
0 days left
EMD
13745
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Deep Tubewell At Bop Khatmarian Of 07 Bn Bsf Under Shq Bsf Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :65 mm nominal bore |
| 2 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 mtr depth below ground level:300 mm dia |
| 3 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 4 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:150 mm dia |
| 5 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:100 mm clamp |
| 6 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I):150 mm dia |
| 7 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 65 mm dia |
| 8 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 65 mm nominal bore |
| 9 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 65 mm nominal bore Horizontal |
| 10 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm nominal bore |
| 11 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia having minimum wall thickness 5.00 mm : |
| 12 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia |
| 13 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :50 to 80 mm nominal bore |
| 14 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with 22 HP DHT/ODEX capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 15 | Modified estimated cost after using correction factor on DSR 2023 on account of GST @ 0.973 |
| 16 | Add Cost Index @ 14.02 % |
| 17 | Providing and fixing G.I. flanged standard including nuts & bolts suitable for flanged jointing as per IS : 1538 :as per direction of Engineer -in-charge. |
| 18 | Lowering /sinking, installation, testing and commisioing of submersible pump set along with GI delivery pipes and submersible cable complete with lifting/machine i e transportation to the site etc as required as per direction of Engineer-in-charge. |
| 19 | Providing and fixing G.I. socket of approved quality (screwed end) :all complete as per direction of Engineer -in-charge: 65 mm nominal bore |
| 20 | Supplying & fixing 7.5 HP submersible pump set.,three phase, 415 volts (water filled motor)-32 mm , Starter panel all complete Make-approved brand as per direction of enginner In-charge |
| 21 | Supply & drawing 1.1 KV rated 4.0 sqmm three core PVC insulated PVC round sheathed copper conductor flexible cable for feeding submersible pump set through pump starter. All complete Make-approved brand as per direction of enginner In-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender