Tender For Restoration Of Shideshwar And Shiv Temple Drangbal P Ore.
Tender Value
86.03 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
14 days left
EMD
1.72 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Shideshwar And Shiv Temple Drangbal P Ore.
BOQ
| Sl. No. | Item Description |
| 1 | Part-A Shiv Mandir. |
| 2 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 3 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 7 | Tile brick masonry with common burnt clay tile bricks of class designation 10 in foundation and plinth including curing complete in: Cement mortar 1:6 (1 cement : 6 coarse sand |
| 8 | Extra for tile bricks masonry with common burnt clay tile bricks in superstructure above plinth level upto floor five level. |
| 9 | Brick work in foundation and plinth with non-modular bricks Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 10 | Extra for tile bricks masonry with common burnt clay tile bricks in superstructure above plinth level upto floor five level. |
| 11 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed |
| 12 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Rough chisel dressed |
| 13 | Ruted/flush pointing on brick tile masonry surface with lime, surkhi and sand in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 fine sand. |
| 14 | 12mm Cement Plaster of mix 1:4(1 cement:4 fine sand) |
| 15 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 16 | Carriage of different materials by MT |
| 17 | Stone and sand for an average lead of 5 kms |
| 18 | Bricks for an average lead of 5 kms |
| 19 | Providing and fixing of signage boad installation fixing in position with writing of necessary information complete job as directed. |
| 20 | Part-B Pujari Bhawan Shiv Temple. |
| 21 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 22 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 23 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 24 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 25 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 26 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 27 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns for mass concrete |
| 28 | Centring and shuttering incld. Strutting, proping etc & removal of form work for lintls, beams, plinth beams, girders bressumers & cantilivers |
| 29 | Centring and shuttering incld. Strutting, proping etc & removal of form work for suspended floors, roofs, landings, balconies & access plateform |
| 30 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 31 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 32 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 33 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD wood |
| 34 | Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISI marked black enamelled M.S Butt hinges with necessary screws excluding panelling KD wood German quality 35mm thick |
| 35 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : KD wood german quality 30 mm Thick |
| 36 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glared shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.KD WOOD |
| 37 | Providing glass panes 4 mm thick ) clerestory window shutters (Area of opening tor giass panes excid portion inside shall be measured) including all beadings fixtures camiage complete job |
| 38 | Providing & fixing of 40x5mm flat iron hold fast 40cm long including fixing to frames with 10mm dia bolts nuts &wooden plugs and embedding in cement conc block 30x10x5cm 1:3:6mix 1cement:3 coarse sand:6 graded stone agg) 20mm nominal size |
| 39 | 12mm Cement Plaster of mix 1:4(1 cement:4 fine sand) |
| 40 | 6mm Cement Plaster of mix 1:3(1 cement:3 fine sand) |
| 41 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 42 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 43 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 44 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 45 | Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade New work (2 or more coats) over and including. Priming coat with cement primer |
| 46 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @2.20kg/10sqm) |
| 47 | Applying priming coat with ready mixed Pink or grey primer of approved brand and manufacture on WOOD work (hard or soft wood) |
| 48 | Painting with synthetic enamel paint of app. Brand & manufacture to give an even shade 2 or more coats on new work |
| 49 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 50 | Providing following hardware items of approved brand and standard manufacturer including all fittings and fixtures complete. |
| 51 | L Drop 200 mm |
| 52 | Tower bolts 100 mm |
| 53 | Tower bolts 200 mm |
| 54 | Handles 150 mm |
| 55 | Handles 200 mm |
| 56 | Stopper |
| 57 | Providing and fixing stainless steel grade 304 railing made of hollow tubes, channels plates etc including grading tube channels plates etc including grinding buffing polishing and making curvature wherever required and fittings same with necessary stainless steel nuts and bolts complete including fixing of railing with necessary accessories and stainless steel dash fasteners and stainless steel bolts etc of required size on top of the floor or on side of waist slab with suitable arrangement as per approval of EIC in four rows. |
| 58 | Providing and fixing stainless steel naval posts (ornamental including top ball 304 Grade of required weight duly anchored to dash fasteners complete as per direction of EIC in four rows |
| 59 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 60 | Providing and fixing gang saw cut, mirror polished, pre-moulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (area of slab over 0.50 sqm) 16 mm thick,Granite. |
| 61 | Carriage of materials by way of Mechanical Transport from source to site of work. |
| 62 | Stone Agg. for an avg lead of 5 km |
| 63 | Sand for an avg lead of 5 km |
| 64 | Bricks for an avg lead of 5 km |
| 65 | Sanitary and Plumbing. |
| 66 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 67 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS:8931 |
| 68 | Supply & fixing in position 20mm dia 600mm long CP Towel Rod of approved make as per the directions of Engineer-in-charge. |
| 69 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 70 | Supplying, fixing, testing and commissioning of storage type water heater (Geyser) approved quality with automatic thermostatic control electric element, pressure release valve, M.S. nuts and bolts etc. Complete, conforming to IS: 2082. 50liters capacity standard Make. |
| 71 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS :8931 |
| 72 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and makę, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 73 | Supply, installation, testing & commissioning of PVC Floor Trap of size 110x75x50/40 inside the toilet/Pantry filling area of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge |
| 74 | Supply/fixing of CP Jali of approved make with all fittings complete. 100mm dia. |
| 75 | Providing, laying, jointing, fixing & pressure testing of 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to.JS:15801. UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings like tees, bends, elbows, reducers, enlargers, unions, nipples, adapters, controls etc. for inlet, delivery, overflow, underground including excavation and backfilling etc. all places. (internal and external works) |
| 76 | PN-16, 25mm OD(SDR-7.4)concealed. |
| 77 | PN-16, 32mm OD(SDR-7.4)exposed |
| 78 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x510mm bowl depth 200mm |
| 79 | Providing and fixing of PVC pipe (type B) in proper gradient including all fittings and fixtures complete. |
| 80 | 100 mm |
| 81 | 75 mm |
| 82 | 100 mm día plain bend |
| 83 | 75 dia dia plain bend |
| 84 | 100 mm dia plain Tee |
| 85 | 75 mm dia plain Tee |
| 86 | Reducer 100mm to 75mm |
| 87 | 100mm dia Door bend |
| 88 | Supplying installing, testing & commissioning of C.P brass sink mixer of approved make with C.P. wall flange, including all necessary accessories, complete in all respect. |
| 89 | Supplying, installing, testing & commissioning of CP brass wall mixer non-telephonic with C.P. wall flange, include necessary accessories complete in full respect. |
| 90 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 91 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 92 | Part-C Shideshwar Temple. |
| 93 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In lime mortar |
| 94 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: |
| 95 | Demolishing Roof manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: |
| 96 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 97 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 98 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 99 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 100 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 101 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 102 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 103 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 104 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 105 | Removing devri stone at existing place incl.re fixing the same in cement motor 1:3 mix with all leads and lifts involved complete |
| 106 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns for mass concrete |
| 107 | Centring and shuttering incld. Strutting, proping etc & removal of form work for lintls, beams, plinth beams, girders bressumers & cantilivers |
| 108 | Centering and shuttering including strutting, propping etc. and removal of form for Arches, domes, vautts upto 6 m span |
| 109 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed |
| 110 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 111 | 6mm Cement Plaster of mix 1:3(1 cement:3 fine sand) |
| 112 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 113 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @2.20kg/10sqm |
| 114 | Stone tile work (Chisselled devri stone) for wall lining upto 10m height with special chemical adhesive like araldite or equivalent over 12mm thick bed of cement mortar 1: 3 (1 cement: 3 coarse sand) / Cement plaster including pointing in white cement with an admixture of pigment to match the stone shade.20mm-25mm thick. with beadings dash fastners anchors etc in any shape (irregular, rectangular etc as per EIC inc carriage complete job |
| 115 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD wood |
| 116 | Providing & fixing panelled or panelled & glazed shutters for windows and clerestory windows including ISI marked black enamelled M.S Butt hinges with necessary screws excluding panelling KD wood German quality 35mm thick |
| 117 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately ist class kail wood 35mm thick |
| 118 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glared shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 35 mm thick.First Class Kail Wood with Carving one side. |
| 119 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class imported wood 30 mm Thick |
| 120 | Providing glass panes 4 mm thick ) clerestory window shutters (Area of opening tor giass panes excid portion inside shall be measured) including all beadings fixtures camiage complete job |
| 121 | Providing and fixing of signage boad installation fixing in position with writing of necessary information complete job as directed. |
| 122 | Carriage of materials by way of Mechanical Transport from source to site of work. |
| 123 | Sand/stone Agg. for an avg lead of 5 km |
| 124 | Electricfication. |
| 125 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 3.5 sqmm FRLS/HEER PVC Insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/AR/Apar make as desired by engineer Incharge) single core cable in surface / recessed medium class PVC condult, Including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty, paint, complete, with modular switch Antibacterial series (Legrand /ABB/Siemens make.), modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC Insulated copper conductor single core cable etc. as required. (Group-C). |
| 126 | Supplying and fixing suitable size Gl box with modular plate and cover In front on surface or In recess, Including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, modular plate, suitable Gt box, connections etc. as required. Modular Switch & Socket:-Antibacterial series (Legrand/ABB/Siemens make.) |
| 127 | Wiring for light/ power plug with 2X4 sq. mm 1X 4 sq. mm earth wire, FRLS/HFFR PVC Insulated copper conductor (Polycab Green/Havells Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer Incharge )) single core cable in surface/recessed medium class PVC conduit.including cutting the wall and making good the same In case of recessed conduit as |
| 128 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, Including providing and fixing 3 pln 5/6 A modular socket outlet and 5/6 A modular switch, Antibacterial series ( Legrand/ABB/Siemens make.) connections etc. as required. |
| 129 | Supplying and fixing suitable size Gi box with modular plate and cover In front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- Antibacterial series (Legrand/ABB/Siemens make1 |
| 130 | Wiring for circult/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC Insulated copper conductor (Polycab Green/Havell Life guard/Fenolex/Salzer/RR/Apar make as desired by engineer Incharge), single core cable in surface/ recessed medium class PVC conduit as required.including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty, paint, complete |
| 131 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 132 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 133 | 2 X6 sq. mm +1 X 6 sq. mm earth wire |
| 134 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 135 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required |
| 136 | Supplying and fixing of following sizes of medium class PVC condult Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty, paint, complete |
| 137 | 25 mm |
| 138 | 32 mm |
| 139 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (But without MCB/RCCB/Isolator). (legrand/Schinider/L&T./ABB/equivalent standard make as directed by engineer Incharge.) |
| 140 | 6 way (4+18), Double door |
| 141 | LED Supply installation testing and commissioning of 18 W+ Surface/recess, Mounted light luminary fitting square or round shape with minimum system lumen efficacy ≥ 120 Im/Watt with Pressure Die cast Aluminium Housing and Heat Sink and P.F.>0.95, THD<10%, CCT 5700K, CRI 80 The LED with Useful life of 50000 Hrs at L70, separate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V. The Fixture should have In-built Surge Protection of 2kV. Certification: LM79 & LMSO test report should be from govt approved In-house NABL lab/government of India. The job Includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years which includes replacement of fixtures of Philips/Helonix/Wipro/Regent make/sample to be approved before Installation. |
| 142 | S/F testing and comm. Of MCB's 10 kA of the below mentioned capacities In sub main controls legrand C curve/ Schinider Acti 9/ L&T/ABB make as directed by engineer incharge. |
| 143 | a) 6-32 Amp SP MCB |
| 144 | b) 40-63amp DP MCB |
| 145 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos, canoples, shackle kit, Power Factor not less than 0.9, Service Value Including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, sultable for 230 V, 50 Hz, and including Iron hook complete. USHA/Havells/Crompton/orient make as directed by engineer Incharge. |
| 146 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Antibacterial series (Legrand/ABB/Siemens make.) |
| 147 | Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make Incl. PVC Block. |
| 148 | Providing of Chemical earthing as per IS standards by way of digging 10 deep pit then embedding 3 meter G.I Earthing electrode, 80mm dia. connecting the plate with main control board by 10 SWG copper wire with 1/2\\" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical.compound |
| 149 | Supply, laying (partly underground/partly overhead) testing and commissioning of PVC alluminium un-armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer Incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 150 | (d)16 sq.mm 2 core (un armoured) |
| 151 | Supply installation testing and comm. of flood light 50 W (warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07,, with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC, lower THD, toughned glass and secondary lens, Open Circult Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/Havells /Wipro/Crompton make. the Job also Includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender