Tender For Primary School Reshipora Dilapidated Primary (S.No 1690)
Tender Value
42.80 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
17 days left
EMD
85600
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Primary School Reshipora Dilapidated Primary (S.No 1690)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excv. By mechnical means over areas not excd. 30 cms & upto 5 m in depth 1.5m in width as well as 10 sqm. On plan, disposal of excvtd. Earth upto 1 m, disposed earth to be levelled & neatly dressed( all kinds of soils) |
| 2 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 3 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 4 | P/L in position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size |
| 5 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:3:6 coarse sand 20mm nominal size crushed stone agg.) |
| 6 | Filling available excv. Earth(excld. Rock) in trenches plinth sides of foundation etc. layers not excd. 20cm in depth consolidating each deposited layer by raming and watering lead 50m and lift upto 1.5 mtr |
| 7 | Reinforced cement conc. Work in beams, suspended floors roofs having slope upto 15 deg. Landing balconies, shelves, lintels upto floor 5 level excld. Centring, shuttering in 1:1.5:3 20mm stone agg. Nominal size |
| 8 | Reinforcement for R.C.C work including straightening cutting, bending placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more..Including carriage of all materials involved with loading unloading and stacking complete. |
| 9 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in 1:6 coarse sand(1 cement, 6 coarse sand) upto floor v level |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately (imported wood) |
| 11 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Imported wood 35mm thick |
| 12 | Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISImarked black enamelled M.S Butt hingeswith necessary screws excluding panelling imported KD wood 35mm thick |
| 13 | Providing & fixing panelling or panelling /glazing in panelled & glazed shutters for doors & windows and clerestory windows 25mm to40mm imported Wood German Quality |
| 14 | Providing & fixing 35mm thick wire gauze shutters using galvanised MS wire aperture1.4mm wire dia 0.63mm for doors & windows and clerestory windows incld bright finished/ black enamelled M.S Butt hinges with necessary screws imported wood german quality |
| 15 | Painting with synthetic enamel paint of app. Brand & manufacture of reqd. colour to give an even shade 2 or more coats on new work over an under coat of suitable shade with ordinary paint of app. Brand & manufacture |
| 16 | 12mm Cement Plaster of mix 1:6(1 cement:6 fine sand) |
| 17 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 1 mm thick |
| 18 | Cement Concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg) finished with a floating coat of neat cement incld. cement slurry but excld the cost of nosing of steps etc complete 50mm thick with 20mm n/s stone agg crushed |
| 19 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 20 | Distempring with oil bound washable distemper of approved brand & manufacture to give an even shade New work (2 or more coats)over and incld. Priming coat with cement primer |
| 21 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns for mass concrete |
| 22 | Centring and shuttering incld. Strutting, proping etc & removal of form work for lintls, beams, plinth beams, girders bressumers & cantilivers |
| 23 | Centring and shuttering incld. Strutting, proping etc & removal of form work for suspended floors, roofs, landings, balconies & access plateform |
| 24 | Centring and shuttering incld. Strutting, proping etc & removal of form work for stairs(excld. Landings excpt spiral stair cases) |
| 25 | Centring and shuttering incld. Strutting, proping etc & removal of form work for colums, pillars, piers, abts, posts and strats |
| 26 | Centring and shuttering incld. Strutting, proping etc & removal of form work for edges of slabs and brakes in floors and walls (under 20 cm wide) |
| 27 | Providing and fixing of 3.5 mm thick Float glass panes |
| 28 | Providing & fixing of 40x5mm flat iron hold fast 40cm long including fixing to frameswith 10mm dia bolts nuts &wooden plugs and embedding in cement conc block 30x10x5cm 1:3:6mix (1cement:3coarse sand:6 graded st agg)20mm nominal size |
| 29 | Providing & fixing Tower bolts 150 mm |
| 30 | Providing & fixing Tower bolts 100 mm |
| 31 | Providing & fixing Handles 100 mm |
| 32 | Providing & fixing Handles 150 mm |
| 33 | Al Drops |
| 34 | P/L Vitrified floor tiles in different sizes with water absorption less than 0.08% with approved make in all colors and shades laid on 20 mm thk c. mortar 1:4 incld grouting the joints with white cement and matching pigments 60x60 cm |
| 35 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 36 | Providing and fixing stainless steel (Grade 304) railing made of Hollowtubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railingwith necessary accessories and stainless steel dash fasteners, stainless steelbolts etc. of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 37 | Structural steel riveted or bolted in built up sections trusses and framed work incld cutting hoisting fixing in positon and applying a priminng coat of approved steel primer all complete Welded |
| 38 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side othe sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 39 | Providing and fixing of teen chajja of coloured teen sheets including cost of base work nails etc. complete job as per the direction of engineer incharge. |
| 40 | Providing and fixing plained eaves boarding.@nd class Kail wood 250x32 mm (nominal size) |
| 41 | Providing ridges of hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.63mm thick with zinc coating not less than 275g/sqm |
| 42 | Providing valley of 90cm overall in plain GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.63 mm thick with zinc coating not less than 350g/sqm |
| 43 | Provision for laying of electric PVC pipes 1\\" Dia in slabs including P/F of Dp box for ceiling lights and fan box during construction work before electrification ( for two No. of slabs and condute walls in civil part) (to be paid as per actual whichever is less) |
| 44 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (Hand lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid. |
| 45 | Providing & fixing Mirror of Superior glass of appd Qtly & required shape and size with plastic moulded frame 6mm thick hard board RECTANGULAR shape 453x357mm |
| 46 | Providing anf fixing brass bib cock of approved quality 15 mm nominal bore |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including allCPVC plain and brass threaded fittings. This includes jointing of pipesand fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge |
| 48 | 15mm nominal Outer dia |
| 49 | 20mm nominal Outer dia |
| 50 | 25mm nominal Outer dia |
| 51 | 32mm nominal Outer dia |
| 52 | Providing and Fixing of Floor Traps 110 mm with double chrome plated Cover one Grated and one closed and all other fittings required. |
| 53 | Providing, Fixing, Testing & Commissioning uPVC SWR pipes (Type-B) for soil, waste and vent conforming to IS 13592 along with all required fittings like tees, bends, cowls, crosses with or without access doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in R.C.C/brick work (slab/beam/wall) and making good the floors, beams and walls with cement mortar where required complete of outer diameter.(Soil/ Waste pipe) (PRINCE ISI MARK) |
| 54 | 100 mm |
| 55 | 75 mm |
| 56 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 57 | Providing and fixing 15 mm nomonal bore C.P brass angle value for basin mixer and geyser of approved make confirming to IS: 8931 |
| 58 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. 18.10.1 White glazed fire clay kitchen sink of size 600x450x250 mm |
| 59 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 60 | Providing and fixing of Geyser of 50 litre capacity i/c all necessary fittings and fixtures |
| 61 | Carriage of different items by machanical transport including loading/unloading. |
| 62 | 40mm + 20mm nominal size aggregates for an average lead of 12 KMs. |
| 63 | Sand from kakapora for an average lead of 15 Kms |
| 64 | Bricks for an average lead of 15 Kms |
| 65 | Septic Tank and Sokage Pit |
| 66 | Earth work in excv. By mechnical means over areas excd. 30 cms & upto 5 m in depth 1.5m in width as well as 10 sqm. On plan, disposal of excvtd. Earth upto 1 m, disposed earth to be levelled & neatly dressed( all kinds of soils) |
| 67 | Providing & Laying of stone soling (dully hand packed) including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 68 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 69 | P/L in position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stoneagg. 20mm nominal size |
| 70 | Centring and shuttering including proping, strutting & removalof the same. Up to plinth level |
| 71 | Brick work with FPS bricks of class designation 75 in foundtion & plinth in cement mortar 1:6 (1 cement, 6 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in |
| 72 | 12 mm Cement Plaster on the rough side of single or half brickwall of mix 1:6(1 cement:6 fine sand) |
| 73 | Reinforcement for R.C.C work including straightening cutting, bending placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more..Including carriage of all materials involved with loading unloading and stacking complete. |
| 74 | Cement Concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg) finished with a floating coat of neat cement incld. cement slurry but excld the cost of nosing of steps etc complete 50mm thick with 20mm n/s stone agg crushe |
| 75 | Dry Random rubble masonry with hard stone i/c all carriagescomplete. |
| 76 | Carriage of materails By Mech.Transport, from source to site of work |
| 77 | 40mm + 20mm nominal size aggregates for an average lead of 12 KMs. |
| 78 | Sand from kakapora for an average lead of 15 Kms |
| 79 | Bricks for an average lead of 15 Kms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender