Tender For Supplying, Erection, Testing And Commissioning Of Horizontal Split Casing (Hsc) Centrifugal Pumpsets And Its Allied Works At Vyasarpadi Water Distribution Station Area-Iv
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Sep 2026
6 days left
EMD
2.03 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supplying, Erection, Testing And Commissioning Of Horizontal Split Casing (Hsc) Centrifugal Pumpsets And Its Allied Works At Vyasarpadi Water Distribution Station Area-Iv
BOQ
| Sl. No. | Item Description |
| 1 | Horizontal Split casing Centrifugal pumpsets |
| 2 | Supply and delivery of AC three Phase 4 pole Horizontal squirrel cage Induction motor confirm ing to IS 325/1996 and as amended thereafter with Class F insulation to suit the speed of pump and suitable for operation with continuous S1 rated, 415 V +/- 10 %, 50 HZ +/- 5%, TEFC (upto 20 HP), SPDP (above 20 HP). The motor offered should be of energy efficient motors.(220KW- 300HP). |
| 3 | Supply and delivery of Horizontal split casing centrifugal pump conforming to IS 1520 and as amended thereafter with CI casing and split glands, stainless steel shaft, hydraulically and dynamically balanced bronze impellers capable of discharging required quantity of water against a total head noted below due to all causes and with the accessories such as G.M air release cock, Grease cup, G.I priming funnel, M.S lifting hook, drip water G.I pipe connections, leading to the outside of pump house rubber water deflector, double flap foot valve, G.M strainer including unique tyre type coupling, common M.S fabricated base to mount pump and motor and other standard fittings etc complete. Pump shall be capable of discharging the specified quantity at the head noted at the minimum NPSH at site conditions. The shut off head shall be atleast 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase, 415 V, 50 Hz, 1500 RPM. ( Flow: 32,700 LPM, Head 36 Meters) |
| 4 | Supply, delivery and installation of Variable Frequencty Drive with IP65 Enclosure Model FC302. Horizintal Centrifugal Pumpset including Control panel and cable adopter box with following specifications:Fuse unit 800A, 2A single pole MCB, ON/OFF indication lamp and trip indication lamp of 230V AC-3 nos, CT disconnector terminal block - 4 nos, 6A double pole MCB 10KA - 2nos, 6A single pole MCB 10KA - 1 no, 9A power contactor - 1no, push button - 2 nos, 6\\" cooling fan - 2 nos, 6\\" air filter - 2nos. The Panel technical specification includes rated operation voltage of 415V AC, rated insulation voltage of 1100V AC +/-10% voltage variation, rated frequency of 50Hz. IP54 degree of protection, floor mounting, control wiring of 1.5sqmm copper cables as per specification required in the site etc., complete for motors 320HP - 350HP |
| 5 | Supplying & laying of 3½ core 300 sq.mm. LTUG cable in a trench to be excavated at a depth of 2½' putting 6” layer of sand and covering the cable with brick and sand refilling the earth to make good |
| 6 | Supplying and fixing of cable gland and termination with Aluminium cable by 3½ core 300 sq mm PVC UG cable and with earth connection |
| 7 | Dismantling the existing pump set including motor, base frame and accessories |
| 8 | C.I. D/F Reflux (Non-Return) Valve as per IS 5312:2004 (Part I), PN-1,600mm with bypass arrangement, ISI marked and 5 years warranty. |
| 9 | 600mm CI sluice valves non raising spindle types to pressure rating of 1.6 PN to be used in pump houses (long body/ long face to Face) conforming to IS and with 5 years warranty |
| 10 | Supply,delivery, erection, testing and commissioning of electrically operarated actuator |
| 11 | Fabrication and fixing of 600mm dia M.S dismantling joint with 3 nos of IS standard flanges welded & 1no free flange including cost of material, Making flange holes, Rolling, welding, machining, FRB coating, \\"O\\" ring etc complete as per site condition as directed by the Engineer-in-Charge. |
| 12 | Cement concrete1:3:6 using Crushed stones and (M sand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc.,complete |
| 13 | Stock brick work with II class bricks in cement mortar1:3(Crushed stones and (M-sand)) for over 23 cm thick wall including curing etc. complete |
| 14 | Plastering with cement mortar 1:3 (Crushed stone sand (M-sand)) for 15mm thick including curing, etc., complete. |
| 15 | Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete |
| 16 | Pump for filling point |
| 17 | Supply, installation, testing and commissioning of Vertical Openwell Submersible Pumpset of approved make (Kirloskar/EKKI/KSB/CRI or equivalent), capable of delivering 100 m³/hr against a Total Dynamic Head (TDH) of 30 metres, driven by a suitable 3-phase, 415 V, 50 Hz squirrel cage induction motor with Variable Frequency Drive (VFD), complete with pump, motor, VFD control panel, non-return valve, sluice/butterfly valve, pressure gauge, delivery piping connections, power cable, cable glands, lugs, earthing, all necessary accessories, erection, alignment, testing, trial run and commissioning, including all labour, tools, tackles and incidental charges, complete as directed by the Engineer-in-Charge.Duty PointDischarge (Q): 100 m³/hrTotal Dynamic Head (TDH): 30 mPower Supply: 415 V, 3 Phase, 50 HzMotor Rating: Suitable HP as per manufacturer's selection (approximately 30 HP). |
| 18 | 3 Core × 50 sq.mm, 1.1 kV Grade, Armoured Aluminium Conductor, XLPE Insulated, PVC Sheathed Cable conforming to IS 7098 (Part I) with ISI marking.( LT Cables ) |
| 19 | Light and fans |
| 20 | Supply, delivery and erection of Three Phase 12 way, LDB with the following:1 No of 63 A FP isolator for incoming supply3 Nos. of 40A, 30mA, DP RCBO18 Nos.of 10 / 16A, SP MCBin sheet steel enclosure fitted with busbars and neutral links and suitable angle iron frame works with provision for earthing etc. complete |
| 21 | Run of 2 of 2.5 sq.mm. PVC unsheathed copper SC cable in PVC pipe for mains with continuous earth connection by 14SWG TC wire |
| 22 | a) Wiring with 2.5 sq.mm. PVC unsheathed copper SC cable in suitable PVC rigid pipe concealed for lights TW box switches and joint boxes with continuous earth connection by 14 SWG TC wire |
| 23 | b) Wiring with 2.5 sq.mm PVC unsheathed coppe single core cable in suitable conduit pipe for fans with 5 amps single pole switch M joint box and MS switch box in flush with all and covered with PVC sheet of 3mm thick with continuous earthwire connection by 14 SWG Tinned copper wire |
| 24 | Wiring with 2.5 sq.mm. PVC unsheathed SC copper cable on suitable rigid PVC pipe for 5A 3pin CS plugn on interlocking including S&F plug pin top inTW box with continuous earth connection by 14 SWG TC wire |
| 25 | Supplying and fixing of surface mount 18-22W LED light fitting |
| 26 | Supplying and fixing of ceiling fixture with gallery complete (Indian type suitable for 60W bulb (Adopting LED bulbs in place of incandescent lamps ) |
| 27 | Supplying and fixing of 12” sweep AC exhaust fan complete including providing necessary opening in the wall |
| 28 | Supplying and fixing of 48” sweep AC ceiling fan complete with regulator with 1m down rod (steampipe) including supplying and fixing of fan clamp with side plates and cross arm |
| 29 | Supplying & laying of 4 core 16 sq.mm LTUG cable in a trench to be excavated at a depth of 2½' putting 6” layer of sand and covering the cable with brick and sand refilling the earth to make good |
| 30 | Supply and fixing of cable gland and lamination with Aluminium cable by 2 core 10 Sqmm LTUG cable and with earth connection. |
| 31 | Supplying and clam ping of 2 core 4sq.mm.PVC LTUG cableby MS clamps on wall |
| 32 | Suppling and fixing of cable gland and termination with earth connection for 2 core 4 sq.mm |
| 33 | GI STEEL TUBULAR POLE FOR STREET LIGHT with 6 Metre Length Double Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length |
| 34 | Supply and fixing of 80W LED Focus Light Fitting with LED |
| 35 | Supply and fixing of 150W LED Industrial type High bay light fitting |
| 36 | Sub Total (excluding GST) |
| 37 | GST @18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender