Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Onboard In Ships At Naval Dockyard, Mumbai; Repair Rate Contract For Three Years For Degutting And Regutting Of Pipes, Valves, Coolers, Atus And Hes

Sharing tender

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Onboard In Ships At Naval Dockyard, Mumbai; Repair Rate Contract For Three Years For Degutting And Regutting Of Pipes, Valves, Coolers, Atus And Hes Fitted Onboard In Sh.. - Deguting Of System Pipes Of Dia Up To 125Mmthe Scope Of Work Will Cover The Following:-(I) Preparation Of System Layout Drawing.(Ii)Marking And Tallying Of System Pipes As Per Layout Drawing.(Iii)Degutting/Removal Of Pipes From System Through Means Of Gas Cutting/Mechanical Cutting/Grinding, Removal Of Fasteners, Electrical Connections, Cl S, Lagging Etc(Iv)Blanking Of Pipe Ends With Plastic/ Wooden Caps. (V)Transporting From Degutting Location To System Dept. Shop Floor Using Own Arrangement.(Vi)Handing Over To Concerned Work Centre And Getting Work Certified By The Concerned Work Centre-In-Charge On Log Book Along With Location Drawing , Degutting Of System Pipes Of Dia Up To 126Mm To 250Mm. The Scope Of Work Will Cover The Following:-(I)Preparation Of System Layout Drawing.(Ii)Marking And Tallying Of System Pipes As Per Lay Out Drawing.(Iii)Degutting/Removal Of Pipes From System Through Means Of Gas Cutting/Mechanical Cutting/Grinding, Removal Of Fasteners, Electrical Connections, Cl S And Lagging Etc.(Iv)Blanking Of Pipe Ends With Plastic/ Wooden Caps.(V)Transporting From Degutted Location To System Dept. Shop Floor Using Own Arrangement.(Vi)Handing Over To Concerned Work Centre And Getting Work Certified By The Concerned Work Centre-In-Charge On Log Book Along With Location Drawing. , Degutting Of System Pipes Of Dia Up To 251Mm To 350Mm. The Scope Of Work Will Cover The Following:-(I)Preparation Of System Layout Drawing.(Ii)Marking And Tallying Of System Pipes As Per Lay Out Drawing.(Iii)Degutting/Removal Of Pipes From System Through Means Of Gas Cutting/Mechanical Cutting/Grinding, Removal Of Fasteners, Electrical Connections, Cl S And Lagging Etc.(Iv)Blanking Of Pipe Ends With Plastic/ Wooden Caps.(V)Transporting From Degutted Location To System Dept. Shop Floor Using Own Arrangement.(Vi)Handing Over To Concerned Work Centre And Getting Work Certified By The Concerned Work Centre-In-Charge On Log Book Along With Location Drawing , Regutting Of System Pipes Of Dia Up To 125Mmthe Scope Of Work Will Cover The Following:-(I)Taking Over/ Transportation Of Repaired Pipes From Concerned Work Centre To Regutted Location/ As Indicated By Work Centre-In-Charge.(Ii)Removal Of Plastic/ Wooden End Caps.(Iii)Regutting/ Installation Of Pipes As Per System Layout Through Means Of Tightening With Fasteners, Washers, Gasket And Lagging If Required. All Consumable Material For Regutting/ Installation/ Lagging To Be Provided By The Firm(Iv)Work Done Of Regutting Of Pipes Certified By User Department On Log Book. , Regutting Of System Pipes Of Dia Up To 126Mm To 250Mm.The Scope Of Work Will Cover The Following:-(I)Taking Over/ Transportation Of Repaired Pipes From Concerned Work Centre To Regutted Location/ As Indicated By Work Centre-In-Charge.(Ii)Removal Of Plastic/ Wooden End Caps.(Iii)Regutting/ Installation Of Pipes As Per System Layout Through Means Of Tightening With Fasteners, Washers, Gasket And Lagging If Required. All Consumable Material For Regutting/ Installation/ Lagging To Be Provided By The Firm(Iv)Work Done Of Regutting Of Pipes Certified By User Department On Log Book , Regutting Of System Pipes Of Dia Up To 251Mm To 350Mm. The Scope Of Work Will Cover The Following:-(I)Taking Over/ Transportation Of Repaired Pipes From Concerned Work Centre To Regutted Location/ As Indicated By Work Centre-In-Charge.(Ii)Removal Of Plastic/ Wooden End Caps.(Iii)Regutting/ Installation Of Pipes As Per System Layout Through Means Of Tightening With Fasteners, Washers, Gasket And Lagging If Required. All Consumable Material For Regutting/ Installation/ Lagging To Be Provided By The Firm(Iv)Work Done Of Regutting Of Pipes Certified By User Department On Log Book , Degguting Of System Valve/ Reducer Of Dia Up To 125Mm. The Scope Of Work Will Cover The Following:-(I)Preparation Of System Layout Drawing.(Ii)Marking And Tallying Of System Valve/ Reducer As Per Lay Out Drawing.(Iii)Degutting/Removal Of Valve/ Reducer From System Through Means Of Gas Cutting/Mechanical Cutting/Grinding, Removal Of Fasteners, Electrical Connections, Cl S And Lagging Etc.(Iv)Blanking Of Valve/ Reducer Ends With Plastic/ Wooden Caps.(V)Transporting From Degutted Location To System Dept. Shop Floor Using Own Arrangement.(Vi)Handing Over To Concerned Work Centre And Getting Work Certified By The Concerned Work Centre-In-Charge On Log Book Along With Location Drawing. , Degguting Of System Valves Of Dia Up To 126Mm To 250Mm. The Scope Of Work Will Cover The Following:-(I)Preparation Of System Layout Drawing.(Ii)Marking And Tallying Of System Valves As Per Lay Out Drawing.(Iii)Degutting/Removal Of Valves From System Through Means Of Gas Cutting/Mechanical Cutting/Grinding, Removal Of Fasteners, Electrical Connections, Cl S And Lagging Etc.(Iv)Blanking Of Valve/ Reducer Ends With Plastic/ Wooden Caps.(V)Transporting From Degutted Location To System Dept. Shop Floor Using Own Arrangement.(Vi)Handing Over To Concerned Work Centre And Getting Work Certified By The Concerned Work Centre-In-Charge On Log Book Along With Location Drawing. , Degguting Of System Valve/ Reducer Of Dia Up To 251Mm To 350Mm. The Scope Of Work Will Cover The Following:-(I)Preparation Of System Layout Drawing.(Ii)Marking And Tallying Of System Valve/ Reducer As Per Lay Out Drawing.(Iii)Degutting/Removal Of Valve/ Reducer From System Through Means Of Gas Cutting/Mechanical Cutting/Grinding, Removal Of Fasteners, Electrical Connections, Cl S And Lagging Etc.(Iv)Blanking Of Valve/ Reducer Ends With Plastic/ Wooden Caps.(V)Transporting From Degutted Location To System Dept. Shop Floor Using Own Arrangement.(Vi)Handing Over To Concerned Work Centre And Getting Work Certified By The Concerned Work Centre-In-Charge On Log Book Along With Location Drawing. , Regutting Of System Valve/Reducer Of Dia From 125Mm. The Scope Of Work Will Cover The Following:--(I) Taking Over/ Transportation Of Repaired/ Overhauled Valve/ Reducer As Concerned Work Centre To Regutted Location/ As Indicated By Work Centre-In-Charge.(Ii) Removal Of Plastic/ Wooden End Caps.(Iii) Regutting/ Installation Of Valve Reducer As Per System Layout Through Means Of Tightening With Fasteners, Washers, Gasket And Lagging If Required. All Consumable Material For Regutting/ Installation/ To Be Provided By The Firm(Iv) Work Done Of Regutting Of Valve/ Reducers Certified By User Department On Log Book. , Regutting Of System Valves Of Dia Up To 126Mm To 250Mm. The Scope Of Work Will Cover The Following:-(I) Taking Over/ Transportation Of Repaired/ Overhauled Valve/ Reducer As Concerned Work Centre To Regutted Location/ As Indicated By Work Centre-In-Charge.(Ii) Removal Of Plastic/ Wooden End Caps.(Iii) Regutting/ Installation Of Valve Reducer As Per System Layout Through Means Of Tightening With Fasteners, Washers, Gasket And Lagging If Required. All Consumable Material For Regutting/ Installation/ To Be Provided By The Firm(Iv) Work Done Of Regutting Of Valve/ Reducers Certified By User Department On Log Book. , Regutting Of System Valve/Reducer Of Dia From 251Mm To 350Mm.The Scope Of Work Will Cover The Following:-(I) Taking Over/ Transportation Of Repaired/ Overhauled Valve/ Reducer As Concerned Work Centre To Regutted Location/ As Indicated By Work Centre-In-Charge.(Ii) Removal Of Plastic/ Wooden End Caps.(Iii) Regutting/ Installation Of Valve Reducer As Per System Layout Through Means Of Tightening With Fasteners, Washers, Gasket And Lagging If Required. All Consumable Material For Regutting/ Installation/ To Be Provided By The Firm(Iv) Work Done Of Regutting Of Valve/ Reducers Certified By User Department On Log Book , Degutting Of System Coolers/Atus/Hesthe Scope Of Work Will Cover The Following:-(I)Preparation Of System Layout Drawing.(Ii)Marking And Tallying Of System Coolers/Atus/Hes As Per Lay Out Drawing.(Iii)Degutting/Removal Of Coolers/Atus/Hes From System Through Means Of Gas Cutting/Mechanical Cutting/ Grinding, Removal Of Fasteners, Electrical Connections, And Cl S Etc. Delagging, Disconnection Of Flanges, Hot Work, Tallying Of Coolers, Removal, And Transportation To The Work Centre.(Iv)Blanking Of Coolers/Atus/Hes Ends With Plastic/ Wooden Caps.(V)Removal And Transporting From Degutted Location To System Dept. Shop Floor Using Own Arrangement.(Vi)Handing Over To Concerned Work Centre And Getting Work Certified By The Concerned Work Centre-In-Charge On Log Book Along With Location Drawing. , Regutting Of System Coolers/Atus/Hesthe Scope Of Work Will Cover The Following:-(I) Taking Over/ Transportation Of Coolers/Atus/Hes From Concerned Work Centre To Regutting Location As Indicated By Work Centre-In-Charge.(Ii) Removal Of Plastic/ Wooden End Caps.(Iii) Lagging Of System As Per Requirement (Iv) Regutting/ Installation Of Coolers/Atus/Hes As Per System Layout Through Means Of Tightening With Fasteners, Washers, Gasket And Lagging If Required. All Consumable Material For Regutting/ Installation/ To Be Provided By The Firm. Refitting Of Hes/Atus/ Coolers Requisite Trunkings/ Piping And Prove The System For No Leakages.(Iv) Work Done Of Regutting Of Coolers/Atus/Hes Certified By User Department On Log Book.