Tender For Renovation Works At Nrpl Jalandhar
Tender Value
34.24 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
3 days left
EMD
9000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Works At Nrpl Jalandhar
BOQ
| Sl. No. | Item Description |
| 1 | Renovation works at NRPL Jalandhar |
| 2 | ACP CLADDING WORK :Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: (A) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (B) Providing, fabricating, supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/ Lumiflon based fluoropolymer resin coating of approved colour and shade on face #1 and polymer (Service) coating on face #2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (C) The fastening brackets of Aluminium alloy 6005 T5/ MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in square metre up to two decimal places. |
| 3 | Float Glass Panes - 5.5 mm thick (weigth not less than 12.5 Kg/SQM) |
| 4 | Providing and fixing, on fixed glazing/ doors/ window panes, sun control film \\"HP NATURAL 35 SAFETY COMBINATION FILM-4Mil\\" of M/s. GARWARE or approved equivalent make and shade, all complete as per manufacturer's specification and as per directions of the Engineer-in-Charge. |
| 5 | Powder coated aluminium (Minimum thickness of powder coating 50 micron) |
| 6 | Polyester powder coated (Minimum thickness 50 micron) Aluminium |
| 7 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per directions of the Engineer-in-Charge. [Note: Door handle, lock and stopper etc.to be paid separately]. |
| 8 | Pull handle with roses 250mm x 19mm diameter. (Ref. Make: DORSET, Model: IP 10 PR SS or approved equivalent). |
| 9 | Supply and installation of lock for toughened glass lock (Make -Ozon for door to door, door to wall arrangement as per instruction of EIC complete in all respect including material, tools, labor etc. |
| 10 | Providing and fixing the frosted/designed (material-PVC, polyester, Make- 3M of equivalent) type film for doors and windows including cutting IOC LOGO and other details as per direction of SIte Engineer/EIC complete in all respect including supply of film ,tools ,labor etc. |
| 11 | Providing & fixing of Roller Blinds of make Vista Non Blackout/ Aerolux Non Blackout/ Vyoma Non Blackout, Blind Shades, Color Decided as per site complete in all respect as per directions of Site Engineer/EIC. All items required for complete fixing (like roller Blinds, headrails, necessary screws, fasteners are included in this item). |
| 12 | \\"Providing and fixing 18 mm thick HDHMR board conforming to relevant IS Standard and of approved brand complete as per direction of the Engineer-in-Charge : For cupboard shutter with one side decorative & other side balancing lamination including providing & fixing 2 mm thick edge binding tape with hot glue using edge binding machine, auto closing spring loaded hinges (hydraulic type) etc. including cutting the grooves on decorative side in desired design and spacing complete as per directions of EIC/Site Engineer. [Note: Payment for Auto Closing Hinges shall be made separately].\\" |
| 13 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make, 500 mm long with screws etc. complete as per direction of the Engineer-in-Charge. |
| 14 | Supply and fixing of IOCL LOGO (Size 1.5 feet x 1.5 feet) in Stainless Steel Material with LED lighting of approved color around perimeter of IOCL LOGO complete in all respect as per directions of Site Engineer/EIC. |
| 15 | 12 mm thick Marine plywood conforming to IS:710 |
| 16 | For cupboard shutter with one side decorative & other side balancing lamination including providing & fixing 2 mm thick edge binding tape with hot glue using edge binding machine, auto closing spring loaded hinges (hydraulic type) etc. complete. [Note: Payment for Auto Closing Hinges shall be made separately]. |
| 17 | 200 mm (Fancy Handle) |
| 18 | Providing and fixing stainless steel soft closing spring hinges at zero degree hinges (hydraulic type) of approved make/ brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of the Engineer-in-Charge. |
| 19 | Providing and fixing readymade stainless steel (304 Grade) Modular Kitchen Basket and accessories such as right angle basket (Plain Cup & Saucer, Plant, Partition, Bottle Rack, Thali, Cutlery), Kitchen Utensil Basket, Dinner Set Basket, Kitchen Grain Basket, Multipurpose Basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, stainless steel screws and telescopic channel, etc. as per direction of the Engineer-in-Charge. [Notes: (1) For payment purpose, only weight of stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners, Telescopic Channels, etc. (2) Payment for providing & fixing telescopic channel shall me made separately under relevant item of SOR]. |
| 20 | Providing and fixing 450 mm deep storage cabinet (All types- low height, full height and over head) with boxing and shutters finished with 19 mm thick pre-laminated block board of BWP Grade, Decorative type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) with, 1.5’ x 1.25’ mm rubber wood/ C.P. teak moulding, complete in all respect including all hardware and polishing of wooden surfaces in natural shade with melamine as per drawings, specification and directions of the Engineer-in-Charge. [Note: Elevation area shall be measured for payment purpose.] |
| 21 | Providing and fixing in position built-up cupboard, internal framework, shelves, drawers, layon slides partitions and shutters 19 mm thick pre-laminated block board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including piano type hinges 19x25 mm, best quality teak wood lipping around the shutter edges, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent) complete including spirit polishing/ enamel painted on lipping in required shade matching to the laminate etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only): For kitchen wall cabinets. |
| 22 | Providing and fixing in position built-up cupboard, shutters with 19 mm thick pre-laminated block board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including piano type hinges 19x25mm, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent) and frame size 50x35 mm in 2nd class teak wood as per drawing complete including spirit polishing/ enamel painted on frame & lipping in required shade matching to the laminate, fixing of frame to wall with hold fasts, 1:2:4 RCC etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only): For kitchen under slab cabinets. |
| 23 | Providing and fixing in position for crockery case made of internal framework, shelves, drawers, layon slides partitions and shutters with 19 mm thick pre-laminated block board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) including piano type hinges (19x25 mm), best quality teak wood lipping around the shutter edges, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent), spirit polishing/ enamel painting on lipping in required shade matching to the laminate etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only). |
| 24 | Supplying, fabricating and fixing M.S. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc., for struts, chain link fencing posts as per drawing including gate, ladders, safety grills, walkways, collapsible gate, signboards, supports for cable trench, making slots for barbed line, wire hoisting, placing in position, embedding in concrete, applying two coats of epoxy paint \\"EPILUX 155\\" High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent make as per manufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing anchor plates,bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc.complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (excluding the cost of concrete work). |
| 25 | Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provision for lifting arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 26 | Size of Tile 1200 x 1200 mm |
| 27 | Size of Tile 1000x1000 mm |
| 28 | 1:4 (1 cement : 4 fine sand) |
| 29 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 30 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 31 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 32 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 33 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge] |
| 34 | Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] |
| 35 | Of area 3.0 sq. metres and below |
| 36 | Of area beyond 3.0 sq. metres |
| 37 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.] |
| 38 | For thickness of tiles 10 mm to 25 mm |
| 39 | Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender