Tender For Renovation The Shed Of Fire Station Bbmb At Beas Dam Site.
Tender Value
36.53 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
20 days left
EMD
73071
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshiarpur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation The Shed Of Fire Station Bbmb At Beas Dam Site.
BOQ
| Sl. No. | Item Description |
| 1 | Stripping and stacking iron sheets of a roof including ridging, flashing, eaves boards gutters and down pipes. |
| 2 | Corrugated GI Sheet roofing 0.80mm thick fixed with galvanized iron J or L hooks 10mm dia, GI Limpot and bitumen washers complete excluding the cost of purling rafters and trusses. |
| 3 | Earthwork In Excavation of Foundation of Bridge Culverts , including handling of materials with combined lead of 15 meters dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around---For semi conglomerate or Soil of nature of pick jumper. |
| 4 | Cement Concrete 1:6:12 with stone 40mm gauge using concrete mixer volumetric type. |
| 5 | First Class burnt Brick Work laid in Cement Sand Mortar 1:6 in Foundation and PLINTH. |
| 6 | Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot andsanded. |
| 7 | First Class Burnt Brick Work laid in Cement Sand Mortar 1:6 in first story upto 4m above PLINTH LEVEL. |
| 8 | 12.5mm Thick Cement Plaster1:5 |
| 9 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of parisand chalk mitti including finishing the surface to the required finish complete. |
| 10 | Finishing walls with textured exterior paint ofrequired shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coatof water proofing Cement Paint applied @ 2.20Kg/10 Sqm |
| 11 | Scraping (a) white wash and colour wash. |
| 12 | Appling priming coat with metal primer on new steel or iron work including preparation of surface. |
| 13 | Painting two or more coats with aluminum paint to give an even shade excluding priming coat. |
| 14 | Dismantling cement conglomerate floors 25mm to 50mm thick without concrete base. |
| 15 | Cement concrete 1:3:6 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type. |
| 16 | Providing and laying 100 mm thick factory made cement concrete interlocking Paving blocks of M- 50 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 - 2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge. |
| 17 | 1.8 Meter High G.I. Barbed Wire Fencing 1.8 meter high G.I. barbed wire fencing with2.4meter angle iron posts 50x50x6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 12 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size 0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications |
| 18 | Providing and fixing mineral fibre false ceiling tiles at allheights With 16 mm thick beveled tegular mineral fibreAnti-microbial false ceiling tile of size 595X595mm ofapproved texture, design and pattern. The tiles shouldhave Humidity Resistance (RH) of 99%, Light Reflection> 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K,Fire Performance as per (BS 476 pt - 6 &7)in truehorizontal level suspended on interlocking T-Grid of hotdipped all round galvanized iron section of 0.33 mmthick (galvanized @120 gsm) comprising of main Trunners of 15x32 mm of length 3000 mm, cross T ofsize 15x32mm of length 1200 mm and secondaryintermediate cross T of size 15x32 mm of length 600mm to form grid module of size 600x600 mmsuspended from ceiling using galvanized mild steel item(galvanised@80gsm) 50 mm long 8mm outer diameterM-6 dash fasteners, 6 mm diameter fully threadedSqm. 252.00 1856.00 277.20 1881.20hanger rod up to 1000 mm length and L-shape leveladjuster of size 85x25x2 mm, spaced at 1200 mmcentre to centre along main ‘T’. The system should reston periphery walls /partitions with the help of GIperimeter wall angle of size24x24X3000 mm made of0.40 mm thick sheet, to be fixed to the wall with help ofplastic rawl plug at 450 mm centre to centre & 40 mmlong dry wall S.S. screws. The exposed bottom portionof all T-sections used in false ceiling support systemshall be pre-painted with polyester baked paint, for allheights. The work shall be carried out as perspecifications, drawings and as per directions of theengineer-in-charge |
| 19 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s lessthan 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 finesand), complete. ( Full body vitrified tiles havepigment in entire body / thickness of tile whichmakes chips and scratches less noticeable andmakena ideal choice for high traffic zones.)Size 600x600 mm |
| 20 | Providing and laying anti skid ceramic floor tiles of size 300x300mm x10mm thick of 1st quality conforming to IS: 15622 of approved make in colours such as white, ivory, grey. Fume red brown, laid on flooring skirting and dado in12.5mm thick cement plaster 1:3 in base and jointed with @3.3 kg/sqm including pointing the joints with white cement and matching pigment etc, complete white cement slurry in joints including corners angels and beading. |
| 21 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming IS: 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy , bottle green, black of size 200x300mm, 100x200mm, 200x200mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:4 (1cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 22 | Supplying pressed steel sheet frames (chowkhat)consisting of 18gauge (1.25mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality fixed in position excluding the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete.(d) Doors and windows frame of size 161mm x60mm with 40mm wide double rebate weighing 4.05kg per meter. |
| 23 | Supplying onenable steel windows of standard rolled steel Z section joints mitered and electrically flash welded with iron fittings including necessary iron handles, Peg stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer.(b) Above one sqm area. |
| 24 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.(b) glass panes 4mm or 10.75 kg/ sqm exceeding 0.4 sqm of area. |
| 25 | Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5mm width fixed with machine screws complete in all respects. |
| 26 | Factory manufactured flush door fixed in position iron hings, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same of position.(c) Decorative with teak facing on both sides edges lipped with teak with laminated core.(iv)35mm thick. |
| 27 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc complete.(A)300x16mm |
| 28 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 29 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concretesurface to give an even shade. |
| 30 | Wire Gauge deodar wood door shutter without springs housed in chowkats (Single Leaf) 35mm thick (i)(a) |
| 31 | Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 32 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc complete.(a) ISI designation no I (size of door up to 700mm) |
| 33 | Ceiling Fan |
| 34 | LED Light 45 watt |
| 35 | Supplying and fixing rolling shutters, ofapproved make, made of 80mmx1.25mm,M.S. Laths, interlocked together throughtheir entire length and jointed together, atthe end, by end locks, mounted onspecially designed pipe shaft, withbrackets, side guides, 27.5cm long wirespring grade No. 2 and arrangement forinside and outside locking with push andpull operation complete, including topcover 0.80mm thick (payment is to bemade for the exact size of opening whererolling shutter is to be fixed) |
| 36 | LED Bulb 9 watt |
| 37 | Dismantling wood work from roof. |
| 38 | Dismantling brick work tile, masonry or tile lining.in cement. |
| 39 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid inheavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring fan point (Without fan box) |
| 40 | Wiring light point) |
| 41 | Wiring 6 Amp. wall socket point |
| 42 | Wiring 16/20 Amp. power plug control point |
| 43 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 2.5 sq.mm (Un-sheathed) |
| 44 | Overall size 4 sq.mm (Un-sheathed) |
| 45 | MINIATURE CIRCUIT BREAKERS/RCBO's/ RCCB's:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 46 | MCB Double Pole 50, 63 amp. (10kA, Curve-C) |
| 47 | MCB Four Pole 50, 63 amp. (10kA, Curve-C) |
| 48 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623- 1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates and circuitidentifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-SP&N Double Door Distribution Board 8 way each |
| 49 | SP&N Double Door Distribution Board 12 way each |
| 50 | TP&N Vertical Double Door Distribution Board 12 way each |
| 51 | DISMANTLING WIRING POINTS & FITTINGS:Dismantling old wiring points including necessary repairs to wall etc:-Fan, light or call bell point |
| 52 | Wall socket, power plug point |
| 53 | Dismantling Sanitary fixtures such as Eurpoean/ Indian/Orissa W.C., PVC/ China warecistern, Wash Hand Basin, Urinal Pot, Sinks andCP Fittings and disposal of dismantled materialwithin a distance of 100 Mtr. complete in allrespect as required by Engineer-in-Charge. Eurpoean/Indian/Orissa W.C. |
| 54 | Dismantling H.C.I specials includingdismantalling of lead joints including cartage /disposal within 5 Km. 100mm i/d H.C.I. specials. |
| 55 | Providing ,laying, jointing, fixing and testingISI Marked G.I. Pipe (as per IS 1239) BClassincluding cost of specials (such as tees,bends, sockets, elbows etc.) ,paintingwithanticorrosivebitumastic paint, testing,cutting,threading Inside building complete. 15mm i/d. |
| 56 | Providing ,laying, jointing, fixing and testingISI Marked G.I. Pipe (as per IS 1239) BClassincluding cost of specials (such as tees,bends, sockets, elbows etc.) ,painting withanticorrosivebitumastic paint, testing,cutting, threading Inside building complete. 20mm i/d. |
| 57 | Providing ,laying, jointing, fixing and testingISI Marked G.I. Pipe (as per IS 1239) Bclassincluding cost of specials (such as tees,bends, sockets, elbows etc.) ,painting withanti corrosivebitumastic paint, testing,cutting, threading Inside building complete. 25mm i/d. |
| 58 | Providing ,laying, jointing, fixing and testingISI Marked G.I. Pipe (as per IS 1239) Bclassincluding cost of specials (such as tees,bends, sockets, elbows etc.) ,painting withanti corrosivebitumastic paint, testing,cutting, threading Inside building complete.40mm i/d. |
| 59 | Providing, Laying , fixing & jointing of P.V.C.Pipes as per ISI-4985 (ISI marked with theprior approval of Engineer-in-Charge) alongthe Trenches and laying the same inTrenches to correct alignment and gradients,cutting, jointing and testing complete as perspecifications.110mm o/d pipe of 6 Kgf. / sqcm. |
| 60 | Providing, Laying , fixing & jointing of P.V.C.Pipes as per ISI-4985 (ISI marked with theprior approval of Engineer-in-Charge) alongthe Trenches and laying the same inTrenches to correct alignment and gradients,cutting, jointing and testing complete as perspecifications.90mm o/d pipe of 6 Kgf. / sqcm. |
| 61 | Providing and fixing in position C.P. brasssoap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawlplugs and C.P brass screws complete in allrespect. |
| 62 | Providing & Fixing in postion stop cock / Anglevalve of approved make (to the approval of Engineer-in-charge) complete in all respect. C.P.brass 15mm Angle valve without flange. |
| 63 | Providing and fixing in position ChinawareIndianOrisa water closet size 580x440 mm ofapproved make (to the approval of theEngineer-in-charge) consisting of 10 ltr. PVCflushing cistern ISI makred including cost ofPVC long bend 32 mm dia complete in allrespect and to the entire satisfaction ofEngineer-in-charge. |
| 64 | Extra for providing and fixing C.P. Brass longflush bend 32mm instead of PVC long bend. . |
| 65 | Providing and fixing in position vitreouschinaware white lavatory suites of approvedmake (to the approval of Engineer-in-charge)including Rack Bolt Screw Pair 115mm longwithout CP fittings complete in all respect. Size 550 mm x 400 mm x 815 mm. |
| 66 | Providing and fixing in position C.P. BrassAuto close Pillar Cock of approved make (tothe approval of Engineer-in-charge) |
| 67 | Providing and fixing P.V.C Waste PipeCollapsiable 32mm complete in all respect. |
| 68 | Providing & Fixing in position 5mm thickbevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-Charge)Size600mmx450mm. |
| 69 | Providing and fixing in position SS Grating withframe of approved make (to the approval of engineer in charge) complete in all respects. |
| 70 | Providing and fixing in position towel rails /ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.C.P. brass towel Rails size 15mm dia610mm long. |
| 71 | Providing & Fixing in postion 15 mm i/d bibcock of approved make (to the approval ofEngineer-in-charge )complete in all respect.Brass Bib cock/Stop cock 15mm x400gm. |
| 72 | Providing & fixing in position PVC flexible tubeconnection of approved make (to the approvalof Engineer-in-charge ) complete in all respect.PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut. |
| 73 | Providing, laying, jointing, fixing and testingISI Marked uPVC Pipe with G.I. specials asper ISI-4985, including cost of G.I. specialssuch as tees, bends, sockets, elbows etc.testing inside building complete.uPVC Pipe 6 Kgf/cm2(50mm i/d) |
| 74 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer-incharge) fixed in with rawl plugs and C.P brass screws complete in all respect.CP brass Acrylic Shelf size 560mmx130mm. |
| 75 | Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.C.P. Brass khunti with 6 pegs. |
| 76 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge)in PVC Water storage tanks complete inallrespect.G.I. tank nipple 20mm i/d |
| 77 | Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and PlasticBall.20mm i/d. |
| 78 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.Triple Layer Tanks. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender