Tender For Repair And Maintenance Of Compound Wall, Fencing In Otm Accn At Central Zone Under Ge (North) Binnaguri
Tender Value
40 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
6 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Compound Wall, Fencing In Otm Accn At Central Zone Under Ge (North) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar of any description,etc complete all as specified and as directed. |
| 2 | M&L brick works with fly ash bricks straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed |
| 3 | M&L brick works with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed |
| 4 | M&L providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in louvres and jallies, 25mm thick (measured solid), including all mouldings and set in cement mortar 1:4 complete all as specified and as directed. |
| 5 | M&L Providing precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in cement mortar 1:4 complete all as specified and as directed. |
| 6 | Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. including removing of rubbished material from work site complete all as specified and as |
| 7 | M&L rendering 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 5mm) mixed with and liquid water proofing compound in top layer as per manufacturer's instructions, finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 8 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 9 | M&L preparation of newly plastered surfaces on wall / ceiling / chajjas and applying two or more coats of 10-0% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surfaces as per the manufacturer instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application with flow speed of minimum 1 Ltr per minute having pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed. |
| 10 | M&L preparation of old surfaces and applying one coat of premimum emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm including washing floors, cleaning glass, joinery etc of drops and splashed complete all as specified and as directed. |
| 11 | Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness (below or above the ground level) complete all as specified and directed |
| 12 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in sub base floor, finished even & fair complete all as specified and as directed. |
| 13 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 14 | M&L 300x300x 25 mm thick prepolished chemically treated chequered tiles set and jointed in neat cement slurry including 15mm thick screed bed in Cement Mortar 1:6 and pointed in white or coloured cement mixed with mixture of pigments to match with the colour of tiles complete all as specified and as directed. |
| 15 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.. |
| 16 | Dismantling post or struts (Wood steel or RCC) any size and shape including taking out embedded portion in concrete, brick work and making good disturbed ground complete all as specified and as directed. |
| 17 | Dismantling fencing wire mesh of any description complete all as specified and as directed. |
| 18 | Dismantling of barbed wire of any size and shape complete all as specified and as directed. |
| 19 | Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surface (soft/loose soil) complete all as specified and as directed. |
| 20 | M&L PCC as in foundation filling in & man concrete type C2 1:3:6 using 40mm graded agregate complete all as specified and as directed. |
| 21 | M&L for providing plain cement concrete type B0 1:2:4 with using 12.5mm graded stone aggregates in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 22 | S&F in repair galvanized. 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and galvanized coating of steel wire shall confirm to the requirement as laid down for medium coated wire in IS 4826 and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc complete all as specified and as directed.(Each line wire to be measured). |
| 23 | Restraining & resecuring including making good staples etc of old barbed wire complete all as specified as directed. |
| 24 | Supply only galvanised steel wire, (Hot dipped galvanised), 75 mm x 75 mm mesh, made up into mattresses or cages complete all as specified and as directed. |
| 25 | Fixing only chain link fencing to post old and new including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. |
| 26 | Supply and fix mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290-Gde E-165 complete all as specified and as directed. |
| 27 | S&F mild steel conforming to Fe.290.Gde-E-165 Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including necessary dismantling the existing unserviceable fram work complete all as specified and as directed. |
| 28 | M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but (dia of neck 10mm and 10cm long) complete all as specified and as directed. |
| 29 | M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enameled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified and as directed. |
| 30 | M&L preparation of new steel surfaces of any description n. exc 10 cm width or girth and applying two coats of synthetic enameled paint (1st quality) over two coat of red oxide Zinc chrome primer complete all as specified and as directed. |
| 31 | Dismantling floor, hearth or wall tilling including cement mortar being (but not backing), and rubbish off the premises complete all as specified and as directed. |
| 32 | M&L glazed ceramic coloured / digital printed/Elevation tiles of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 33 | Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as specified and as directed. |
| 34 | M&L for 18-20mm thick Granite work ( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screeding in cement mortar 1:4 including full rounding the exposed surfaces complete all as specified and as directed. Notes: (a)Granite colour shall be approved by Engr-in-charge /GE at the time of execution of work. |
| 35 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 36 | M&L Reinforced cement concrete (Nominal mix) type B-1 , 1:2:4 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 37 | M&L TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 38 | M&L for TMT bars 10 mm dia ,cut to length bent to shape required in hooking ends fixed in chain link fencing complete all as specified and as directed. |
| 39 | M&L TMT bars 8mm dia as in stirrups, spacers and binders with & including mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 40 | M&L450 mm dia reinforced concrete pipes, class NP3, laid and jointed complete with collers complete all as specified. |
| 41 | M&L preparation of old Steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender