Tender For Provn Of Reinforced Cement Concrete Security Wall With Y Shape Angle Iron And Concertina Coil Over Top From Bldg P-48 To New Residency (Along Main Road) At New Residency Area Under Ge Gwalior.
Tender Value
42.66 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
3 days left
EMD
85334
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Reinforced Cement Concrete Security Wall With Y Shape Angle Iron And Concertina Coil Over Top From Bldg P-48 To New Residency (Along Main Road) At New Residency Area Under Ge Gwalior.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 2 | Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed. |
| 3 | Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 4 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | Excavating in trenches n exc 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. (Note: As in foul condition manualy excavation works) |
| 6 | M&L for PCC 1:4:8 Type D2 (using 40mm graded stone agg) as in foundation filling mass concrete, complete all as specified and directed. |
| 7 | M&L for reinforced cement concrete, M-25 (design mix) (using 20mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs and mass cocrete complete all as specified and directed. |
| 8 | M&L RCC M-25 Design mix (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc., complete all as specified and directed |
| 9 | Use and waste for Form work to sides of concrete foundations, footings, base of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams etc for rough finished flat surfaces complete all as specified and directed. |
| 10 | Use and waste for formwork to sides of pillars, posts struts, piers columns andstanchions, square, rectangular or polygonal for fair finished surfaces of concrete complete all as specified and as directed |
| 11 | M&L for mild steel TMT bars, 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 12 | M&L for TMT bars 5mm dia and over upto and including 10mm dia of in stirrups, spacers and binders and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 13 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed. |
| 14 | M&L PCC 1:2:4 type B-1 (using 12.5mm graded stone aggregate) as in coping etc complete all as specified and directed. |
| 15 | M&L for 12 mm thick rendering in CM 1:6 on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for 15 mm thick rendering in CM 1:4 on other than fair faces of brick/ concrete/stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete, colour and pattern as approved by Engr-in-charge, complete all as specified and directed. |
| 18 | M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed |
| 19 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 20 | S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including, securing and tying at crossings with and provisions of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured). |
| 21 | M&L galvanized Concertina coil, duly stretched, maintaing a dia of 600mm, concertina coil placed in Y shape angle iron post erected over boundary wall and fixed to angle iron with 3mm dia GI bearer wire, complete all as specified and as directed. |
| 22 | Returning, filling in, including spreading ,leveling, watering and well ramming in layers n. exc 25 cm with any type of soil complete all as specified and as directed. |
| 23 | Removing excavated material (soil), exceeding 250m not exceeding 500m distance and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender