Tender For Repair/Renewal Of Wooden And Steel Furniture For Md Accn At Af Stn Chabua And Repair/Maint Of Wooden And Steel Furniture For 42 Weu Under Ge (Af) Chabua
Tender Value
31.50 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
10 days left
EMD
63000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renewal Of Wooden And Steel Furniture For Md Accn At Af Stn Chabua And Repair/Maint Of Wooden And Steel Furniture For 42 Weu Under Ge (Af) Chabua
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to Bed Hard with Plywood top for the following :- (i) Removing old unserviceable head board from Bed hard and supply new head board made out of 18mm thick both sides pre-laminataed particle board screwed to MS strip in the existing position including 4mm thick timber beading around the edging all as directed. |
| 2 | (ii) Removing old unserviceable foot board from Bed hard and supply new foot board made out of 18mm thick both sides pre-laminataed particle board screwed to MS strip in the existing position including 4mm thick timber beading around the edging all as directed. |
| 3 | (iii) Removing of unserviceable Plywood from Bed hard and S&F new ply wood 12mm thick BWR,phenol bonded ISI marked fixed with 4mm dia 60mm long nut & bolts in its existing position complete as directed. |
| 4 | (iv) Removing u/s shoes from legs and S&F new rubber shoes best quality as directed. |
| 5 | Repairs to Bed with Plywood top for the following :- (i) Removing old unserviceable head board from Bed ply top and S&F new head board made out of 1st class hard wood, duly covered with new 4mm thick plywood one side teak finish (Make-Green Ply/Kit Ply) fixed on both side of head board including 4mm thick timber beading around the edging all as directed. |
| 6 | (ii) Removing old unserviceable foot board from Bed ply top and S&F new foot board made out of 1st class hard wood, duly covered with new 4mm thick plywood one side teak finish (Make-Green Ply/Kit Ply) fixed on both side of head board including 4mm thick timber beading around the edging all as directed. |
| 7 | (iii) Removing of unserviceable long rail and S&F new long rail made of 1st class hard wood all as directed. |
| 8 | (iv) Removing of unserviceable short rail and S&F new short rail made of 1st class hard wood all as directed. |
| 9 | (v) Removing u/s ply wood from existing position and S&F new plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board)12mm thick,ISI mark with screw all as directed. |
| 10 | Repairs to Chair dining for the following :-(i) Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed. |
| 11 | (ii) Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed. |
| 12 | (iii) Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed. |
| 13 | (iv) Taking out unserviceable back rest and provn of new back rest made of 1st class hard wood all as directed. |
| 14 | (v) Taking out unserviceable stiffeners and provn of new stiffeners made of 1st class hard wood all as directed. |
| 15 | Repairs to Chair dining JCOs/ORs for the following :-(i) Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed. |
| 16 | (ii) Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed. |
| 17 | (iii) Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed. |
| 18 | (iv) Taking out unserviceable back rest and provn of new back rest made of 1st class hard wood all as directed. |
| 19 | (v) Taking out unserviceable stiffeners and provn of new stiffeners made of 1st class hard wood all as directed. |
| 20 | (vi) Removing of unserviceable seat and S&F new PVC seat as per existing size and pattern complete all as specifed and directed. |
| 21 | Repairs to Chair easy for the following :- (i) Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed. |
| 22 | (ii) Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed. |
| 23 | (iii) Taking out unserviceable side rails and provn of new side rails made of 1st class hard wood all as directed. |
| 24 | (iv) Removing of unserviceable seat and S&F new seat made out of 1st class hard wood timber wrought duly caned with new plastic cane 2mm wide half round for main caning and border with 3.5mm wide half round cane and high glow polishing of frame with french polish complete. |
| 25 | (v) Removing of unserviceable back and S&F new back made out of 1st class hard wood timber wrought duly caned with new plastic cane 2mm wide half round for main caning and border with 3.5mm wide half round cane and high glow polishing of frame with french polish complete. |
| 26 | (vi) Taking out unserviceable arm rest and provn of new arm rest made of 1st class hard wood all as directed. |
| 27 | Repair to Chair Revolving high back for the following :-(i) Taking out u/s seat and S&F new seat with 12mm thick ply wood BWR made to shape for seat,upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around. |
| 28 | (ii) Taking out u/s back and S&F new back with 12 mm thick ply wood BWR made to shape of back, upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around |
| 29 | (iii) Taking out u/s hand rest and S&F new hand rest of black integral skin polyurethane reinforced with MS insert complete |
| 30 | (iv) Taking out u/s base and S&F new 5 star base fitted with twin wheel castors including u/s hydrolic system where applicable. |
| 31 | Repairs to Chair varandah for the following :- (i) Removing of old cane from seat of back and replace with new plastic cane 3.5mm wide half round complete all as specified and as directed. |
| 32 | (ii) Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new rubber shoe best quality in the same position as directed. |
| 33 | (iii) Removing of old usnsv cane/ Newar from seat & back and prepare the conduit structure for painting by scrapping the old surface and painting with white synthetic enamal paint over a coat of white primer complete as directed. |
| 34 | (iv) Welding to frames wherever required at cracked/broken portion |
| 35 | Repairs to Charpoy GI Pipe for the following :-(i) Taking out unserviceable long rails and fixing new long rails 1980 mm long duly threaded at both end out of GI tube 32mm dia medium grade of 1.98 m long all as directed. |
| 36 | (ii) Taking out unserviceable short rails and fixing new short rails made of GI tube 32mm dia medium grade of 0.90 m long out of u/s long rails so obtained from 11(a) here in above all as directed. |
| 37 | (iii) Taking out unserviceable legs and fixing new legs 0.44 m long,out of u/s short/long rails so obtained from 11(b) here in above and plugged the bottom of legs with 50mm dia circular 1st class hard wood block. |
| 38 | (iv) Taking out unserviceable elbow and S&F new GI elbow 32mm dia, three way medium grade, ISI marked duly screwed legs,short rails and long rails,tightly in to the angle elbow fully housed by 22mm all as directed. |
| 39 | (v) Taking out unserviceable check nut from long rails and S&F new check nuts of 10mm wide,32mm dia in its existing position . |
| 40 | (vi) Removing of existing unserviceable ply top from charpoy , tightening the frame and S&F new ply wood 12mm thick BWR, ISI marked with 4mm dia 60mm long nut & bolts ,03 Nos of MS flat iron 6mmx40mm with top welded to long rail to long rail on equal distance. 03 Nos of 4mm dia hole to be provided for fixing ply wood. 4 Nos of MS flat 100mmx25mmx6mm to be welded to the short rail for fixing ply wood all as directed. |
| 41 | Repairs to Locker bed side steel for the following :-(i) Removing of u/s leg and S&F new leg made out of 1mm MS sheet shape with ends covered and welded to bottom of locker duly painted the base internally/externally with existing colour over a coat of red oxide primer complete all as directed. |
| 42 | (ii) Taking out worn out shelf and S&F new shelf made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer. |
| 43 | (iii) Taking out worn out partition and S&F new partition made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer. |
| 44 | (iv) Taking out worn out shutter and S&F new shutter made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer. |
| 45 | (v) Replacement of u/s fittings such as Chromium plated steel handle 100 mm long, hasp & staple 75mm of existing pattern as directed. |
| 46 | Repairs to Peg table for the following :- (i) Taking down decayed top and supply and fixing new top 18 mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed. |
| 47 | (ii) Taking out broken legs and provn of new legs made of 1st class hard wood all as directed. |
| 48 | (iii) Removing unserviceable rails to the longer sides and supply and fixing new rails made of 1st class hard wood, complete all as specified and all as directed. |
| 49 | (iv) Removing unserviceable rails to the shorter sides and supply and fixing new rails made of 1st class hard wood, complete all as specified and all as directed. |
| 50 | Repairs to Sofa single seater with cushion ;-(i) Taking out u/s rear legs and provn of new legs made of 1st class HW and all as directed. |
| 51 | (ii) Taking out u/s front legs and provn of new legs made of 1st class HW and all as directed. |
| 52 | (iii) Taking out u/s rails and provn of new rails made of 1st class HW and all as directed. |
| 53 | (iv) Taking out u/s seat frame and provn of new seat frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 54 | (v) Taking out u/s back frame and provn of new back frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 55 | (vi) Taking out u/s arm and provn of new arm made of 1st class HW all as directed. |
| 56 | (vii) Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 32 density,ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 450/- per RM) duly wraped with long cloth of existing pattern and as directed. |
| 57 | Repairs to Sofa 3 seater with cushion ;-(i) Taking out u/s rear legs and provn of new legs made of 1st class HW and all as directed. |
| 58 | (ii) Taking out u/s front legs and provn of new legs made of 1st class HW and all as directed. |
| 59 | (iii) Taking out u/s long rails and provn of new rails made of 1st class HW and all as directed. |
| 60 | (iv) Taking out u/s short rails and provn of new short rails made of 1st class HW and all as directed. |
| 61 | (v) Taking out u/s seat frame for 3 seaters and provn of new seat frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 62 | (vi) Taking out u/s back frame for 3 seaters and provn of new back frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 63 | (vii) Taking out u/s arm and provn of new arm made of 1st class HW all as directed. |
| 64 | (viii) Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 32 density,ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 450/- per RM) duly wraped with long cloth of existing pattern and as directed. |
| 65 | Repairs to Sofa 5 seater with cushion ;-(i) Taking out u/s rear legs and provn of new legs made of 1st class HW and all as directed. |
| 66 | (ii) Taking out u/s front legs and provn of new legs made of 1st class HW and all as directed. |
| 67 | (iii) Taking out u/s long rails for 3 seater and provn of new rails made of 1st class HW and all as directed. |
| 68 | (iv) Taking out u/s long rails for single seater and provn of new rails made of 1st class HW and all as directed. |
| 69 | (v) Taking out u/s short rails for 3 seater and provn of new rails made of 1st class HW and all as directed. |
| 70 | (vi) Taking out u/s seat frame for 3 seater and provn of new seat frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 71 | (vii) Taking out u/s back frame for 3 seater and provn of new back frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 72 | (viii) Taking out u/s seat frame for single seater and provn of new seat frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 73 | (ix) Taking out u/s back frame for single seater and provn of new back frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 74 | (x)Taking out u/s arm and provn of new arm made of 1st class HW all as directed. |
| 75 | (xi) Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 32 density,ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 450/- per RM) duly wraped with long cloth of existing pattern and as directed. |
| 76 | Table Computer (Make-Godrej, Model-C2)(i) Taking down u/s top and supply and fixing new top 18 mm thick pre-laminated particle board exterior gradewith 4mm thick timber beading all around the edging complete all as directed. |
| 77 | (ii) Taking down u/s Key board tray and supply and fixing new tray duly fitted on telescopic channels with smooth sliding towards front and back as per existilnlg size and pattern complete all as specifed and directed. |
| 78 | (iii) Taking down u/s bottom shelf and supply and fixing new bottom shelf 18 mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed. |
| 79 | (iv) Taking down u/s wheel from the bottom of table and supply and fixing wheel as per existilnlg size and pattern complete all as specifed and directed. |
| 80 | Repairs toTable dinning ORs for the following :-(i) Taking down decayed top and supply and fixing new top of 18 mm thick pre-laminated particle board exterior grade with 4 mm thick teakwood beading all around the edging complete all as specified and shown on drawings. |
| 81 | (ii) Material and labour for applying one coat of synthetic enamel paint of approved colour by spray painting including removing old painted surface by scraping complete all as specified and directed. |
| 82 | (iii)Removing of u/s legs of size 100 mm long ,25 mm size MS square tube and refixing the same in existing position of frame by welding complete all as specified and directed. |
| 83 | (iv) Removing of u/s cracked or decayed rubber shoes and replacing the same with new rubber shoes of best quality complete all as specified and directed. |
| 84 | Repairs to Table dressing ladies for the following:- (i) Taking down decayed top and supply and fixing new top with 12mm thick pre-laminated particle board exterior grade with one side teak face to the exposed surface all as directed. |
| 85 | (ii) Taking down decayed side and supply and fixing new side with 12mm thick pre-laminated particle board exterior grade with one side teak face to the exposed surface all as directed. |
| 86 | (iii) Taking down decayed bottom and supply and fixing new bottom with 12mm thick pre-laminated particle board exterior grade with one side teak face to the exposed surface all as directed. |
| 87 | (iv) Replacing decayed bottom, sides & back of drawer with new 6 mm thick ply wood, front side with 18mm thick pre-laminated particle board all as directed. |
| 88 | (v) Removing of defade mirror and replaced with new 5mm thick electro copper plated mirror (Modi/Atul Saint Gobbin of size as specified with a frame cut to shape and fixed 12 X 20 mm HW and sloping on sides all as directed. |
| 89 | Repairs to Teapoy Varandah for the following:- (i) Taking down decayed top and supply and fixing new top 18 mm thick pre-laminated particle board exterior gradewith 4mm thick timber beading all around the edging complete all as directed. |
| 90 | (ii) Welding to frame wherever required complete all as directed. |
| 91 | (iii) Replacement of 4 nos rubber shoes with new one complete all as directed. |
| 92 | Material and labour for removing of old cane from various chairs such as chair dining, chair easy, etc.and replacing the same with new 2mm wide for main caning and border with 3 mm wide cane all as specified. |
| 93 | Material and labour for polishing /painting to various wooden/ Steel furniture with French polish including removing of old polish complete all as directed:-(i) Almirah Med 1/2H,1/2S |
| 94 | (ii) Almirah large with shelf |
| 95 | (iii) Chair Dining |
| 96 | (iv) Chair Easy |
| 97 | (v) Hat stand with mirror |
| 98 | (vi) Sofa five seater |
| 99 | (vii) Sofa single seater |
| 100 | (viii) Sofa three seater |
| 101 | Repairs to Almirah large Steel with shelves for the following :- (i) Removing of unserviceable base and S&F new base made of two numbers MS channels out of 1mm MS sheet U shaped with ends covered and welded to bottom of almirah duly painted the base internally/externally with existing colour over a coat of red oxide primer complete all as directed. |
| 102 | (ii) Taking out worn out shelf and S&F new shelf made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer |
| 103 | (iii)Removing of unservilceable locks and S&F new locks of existing pattern with two keys. |
| 104 | (iv) Removing of unserviceable handle and S&F new MS chromium plated handles of existing pattern. |
| 105 | Repairs to Almirah medium Steel for the following :- (i) Removing of unserviceable base and S&F new base made of two number MS channels out of 1mm MS sheet shape with ends covered and welded to bottom of almirah duly painted the base internally/externally with existing colour over a coat of red oxide primer complete all as directed. |
| 106 | (ii) Taking out worn out shelf and S&F new shelf made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer. |
| 107 | (iii) Removing of unserviceable locks and S&F new locks of existing pattern with two keys. |
| 108 | (iv)Removing of unserviceable handle and S&F new MS chromium plated handles of existing pattern. |
| 109 | Repairs to Bed Hard with Plywood top for the following :- (i) Removing old unserviceable head board from Bed hard and supply new head board made out of 18mm thick both sides pre-laminataed particle board screwed to MS strip in the existing position including 4mm thick timber beading around the edging all as directed. |
| 110 | (ii)Removing old unserviceable foot board from Bed hard and supply new foot board made out of 18mm thick both sides pre-laminataed particle board screwed to MS strip in the existing position including 4mm thick timber beading around the edging all as directed. |
| 111 | (iii) Removing of unserviceable Plywood from Bed hard and S&F new ply wood 12mm thick BWR,phenol bonded ISI marked fixed with 4mm dia 60mm long nut & bolts in its existing position complete as directed. |
| 112 | (iv)Removing u/s shoes from legs and S&F new rubber shoes best quality as directed. |
| 113 | Repairs to Bed with Plywood top for the following :- (i) Removing old unserviceable head board from Bed ply top and S&F new head board made out of 1st class hard wood, duly covered with new 4mm thick plywood one side teak finish (Make-Green Ply/Kit Ply) fixed on both side of head board including 4mm thick timber beading around the edging all as directed. |
| 114 | (ii) Removing old unserviceable foot board from Bed ply top and S&F new foot board made out of 1st class hard wood, duly covered with new 4mm thick plywood one side teak finish (Make-Green Ply/Kit Ply) fixed on both side of head board including 4mm thick timber beading around the edging all as directed. |
| 115 | (iii) Removing of unserviceable long rail and S&F new long rail made of 1st class hard wood all as directed. |
| 116 | (iv)Removing of unserviceable short rail and S&F new short rail made of 1st class hard wood all as directed. |
| 117 | (v) Removing u/s ply wood from existing position and S&F new plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board)12mm thick,ISI mark with screw all as directed. |
| 118 | Repairs to Chair CB office for the following :-(i) Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood as directed. |
| 119 | (ii) Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed. |
| 120 | (iii) Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed. |
| 121 | (iv) Taking out unserviceable back rest stiffener and provn of new back rest stiffener made of 1st class hard wood all as directed. |
| 122 | (v) Taking out unserviceable stiffener.and provn of new stiffener.made of 1st class hard wood all as directed. |
| 123 | (vi) Taking out unserviceable arm and provn of new arm made of 1st class hard wood all as directed. |
| 124 | Repairs to Chair Computer w/arm for the following :- (i) Taking out u/s seat and S&F new seat with 12 m thick hot pressed ply wood made to shape for seat and shall be upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around. |
| 125 | (ii) Taking out u/s back and S&F new back with 12 m thick hot pressed ply wood made to shape for back and shall be upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around. |
| 126 | (iii) Taking out u/s hand rest and S&F new hand rest of black integral skin polyurethane reinforced with MS insert complete. |
| 127 | (iv) Taking out u/s base and S&F new 5 star base fitted with twin wheel castors including u/s hydrolic system where applicable . |
| 128 | (v) Taking down u/s wheel from the base and supply and fixing wheel as per existing size and pattern complete all as specifed and directed. |
| 129 | Repairs to Chair dining for the following :-Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed. |
| 130 | Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed. |
| 131 | Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed. |
| 132 | Taking out unserviceable back rest and provn of new back rest made of 1st class hard wood all as directed. |
| 133 | Taking out unserviceable stiffeners and provn of new stiffeners made of 1st class hard wood all as directed. |
| 134 | Repairs to Chair dining JCOs/ORs for the following :-Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed. |
| 135 | Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed. |
| 136 | Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed. |
| 137 | Taking out unserviceable back rest and provn of new back rest made of 1st class hard wood all as directed. |
| 138 | Taking out unserviceable stiffeners and provn of new stiffeners made of 1st class hard wood all as directed. |
| 139 | Removing of unserviceable seat and S&F new PVC seat as per existing size and pattern complete all as specifed and directed. |
| 140 | Repairs to Chair easy for the following:-Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed. |
| 141 | Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed. |
| 142 | Taking out unserviceable side rails and provn of new side rails made of 1st class hard wood all as directed. |
| 143 | Removing of unserviceable seat and S&F new seat made out of 1st class hard wood timber wrought duly caned with new plastic cane 2mm wide half round for main caning and border with 3.5mm wide half round cane and high glow polishing of frame with french polish complete. |
| 144 | Removing of unserviceable back and S&F new back made out of 1st class hard wood timber wrought duly caned with new plastic cane 2mm wide half round for main caning and border with 3.5mm wide half round cane and high glow polishing of frame with french polish complete. |
| 145 | Taking out unserviceable arm rest and provn of new arm rest made of 1st class hard wood all as directed. |
| 146 | Repair of chair tubular steel with arms for the following:-Removing of unserviceble seat and S & F new seat made out of 1st class HW timber wrought duly caned with new plastic cane 2mm wide half round for main caning and border with 3.5mm wide half round cane and applying to coats of black paint complete as directed. |
| 147 | Removing of unserviceble back and S & F new back made out of 1st class HW timber wrought duly caned with new plastic cane 2mm wide half round for main caning and border with 3.5mm wide half round cane and applying to coats of black paint complete as directed. |
| 148 | Removing of unserviceble wooden arm and S & F new wooden arm of 1st class HW as per existing one and applying applying to coats of black paint complete as directed. |
| 149 | Repairs to Chair Steel Executive visitors for the following :-Removing of unserviceble seat and S & F new seat made out of 1st class HW timber wrought duly caned with new plastic cane 2mm wide half round for main caning and border with 3.5mm wide half round cane and applying to coats of black paint complete as directed. |
| 150 | Removing of unserviceble back and S & F new back made out of 1st class HW timber wrought duly caned with new plastic cane 2mm wide half round for main caning and border with 3.5mm wide half round cane and applying to coats of black paint complete as directed. |
| 151 | Removing of unserviceble wooden arm and S & F new wooden arm of 1st class HW as per existing one and applying applying to coats of black paint complete as directed. |
| 152 | Repairs to Chair varandah for the following :- Removing of old cane from seat of back and replace with new plastic cane 3.5mm wide half round complete all as specified and as directed. |
| 153 | Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new rubber shoe best quality in the same position as directed. |
| 154 | Removing of old usnsv cane/ Newar from seat & back and prepare the conduit structure for painting by scrapping the old surface and painting with white synthetic enamal paint over a coat of white primer complete as directed. |
| 155 | Welding to frames wherever required at cracked/broken portion |
| 156 | Repairs to Chair WB without arm for the following:- Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood as directed. |
| 157 | Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed. |
| 158 | Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed. |
| 159 | Taking out unserviceable back rest and provn of new back rest made of 1st class hard wood all as directed. |
| 160 | Taking out unserviceable stiffener.and provn of new stiffener.made of 1st class hard wood all as directed. |
| 161 | Taking out old unserviceable seat and provn of new seat of 6mm thick ply wood BWR grade all as directed. |
| 162 | Repairs to Chair writing for the following :- Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed. |
| 163 | Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed. |
| 164 | Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed. |
| 165 | Taking out unserviceable back rest and provn of new back rest made of 1st class hard wood all as directed. |
| 166 | Taking out unserviceable stiffeners and provn of new stiffeners made of 1st class hard wood all as directed. |
| 167 | Taking out unserviceable arm and provn of new arm made of 1st class hard wood all as directed. |
| 168 | Repairs to Charpoy GI Pipe for the following :-Taking out unserviceable long rails and fixing new long rails 1980 mm long duly threaded at both end out of GI tube 32mm dia medium grade of 1.98 m long all as directed. |
| 169 | Taking out unserviceable short rails and fixing new short rails made of GI tube 32mm dia medium grade of 0.90 m long out of u/s long rails so obtained from 11(a) here in above all as directed. |
| 170 | Taking out unserviceable legs and fixing new legs 0.44 m long,out of u/s short/long rails so obtained from 11(b) here in above and plugged the bottom of legs with 50mm dia circular 1st class hard wood block. |
| 171 | Taking out unserviceable elbow and S&F new GI elbow 32mm dia, three way medium grade, ISI marked duly screwed legs,short rails and long rails,tightly in to the angle elbow fully housed by 22mm all as directed. |
| 172 | Taking out unserviceable check nut from long rails and S&F new check nuts of 10mm wide,32mm dia in its existing position . |
| 173 | Removing of existing unserviceable ply top from charpoy , tightening the frame and S&F new ply wood 12mm thick BWR, ISI marked with 4mm dia 60mm long nut & bolts ,03 Nos of MS flat iron 6mmx40mm with top welded to long rail to long rail on equal distance. 03 Nos of 4mm dia hole to be provided for fixing ply wood. 4 Nos of MS flat 100mmx25mmx6mm to be welded to the short rail for fixing ply wood all as directed. |
| 174 | Repairs to Locker bed side steel for the following :-Removing of u/s leg and S&F new leg made out of 1mm MS sheet shape with ends covered and welded to bottom of locker duly painted the base internally/externally with existing colour over a coat of red oxide primer complete all as directed. |
| 175 | Taking out worn out shelf and S&F new shelf made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer. |
| 176 | Taking out worn out partition and S&F new partition made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer. |
| 177 | Taking out worn out shutter and S&F new shutter made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer. |
| 178 | Replacement of u/s fittings such as Chromium plated steel handle 100 mm long, hasp & staple 75mm of existing pattern as directed. |
| 179 | Repairs to Peg table for the following :- Taking down decayed top and supply and fixing new top 18 mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed. |
| 180 | Taking out broken legs and provn of new legs made of 1st class hard wood all as directed. |
| 181 | Removing unserviceable rails to the longer sides and supply and fixing new rails made of 1st class hard wood, complete all as specified and all as directed. |
| 182 | Removing unserviceable rails to the shorter sides and supply and fixing new rails made of 1st class hard wood, complete all as specified and all as directed. |
| 183 | Repairs to Table 900 x 600 w/o drawer for the following :-Taking down decayed top and S&F new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed. |
| 184 | Taking out unserviceable legs and provn of new legs made of 1st class hard wood all as directed. |
| 185 | Taking out unserviceable long rails and provn of new long rails made of 1st class hard wood all as directed. |
| 186 | Taking out unserviceable short rails and provn of new short rails made of 1st class hard wood all as directed. |
| 187 | Taking out unserviceable stilffener and provn of new stiffener made of 1st class hard wood all as directed. |
| 188 | Repairs to Table Centre for the following:- Taking down decayed top and S&F new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed. |
| 189 | Taking out unserviceable legs and provn of new legs made of 1st class hard wood and all as directed. |
| 190 | Taking out unserviceable long rails and provn of new long rails made of 1st class hard wood and all as directed. |
| 191 | Taking out unserviceable short rails and provn of new short rails made of 1st class hard wood and all as directed. |
| 192 | Table Computer (Make-Godrej, Model-C2)Taking down u/s top and supply and fixing new top 18 mm thick pre-laminated particle board exterior gradewith 4mm thick timber beading all around the edging complete all as directed. |
| 193 | Taking down u/s Key board tray and supply and fixing new tray duly fitted on telescopic channels with smooth sliding towards front and back as per existilnlg size and pattern complete all as specifed and directed. |
| 194 | Taking down u/s bottom shelf and supply and fixing new bottom shelf 18 mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed. |
| 195 | Taking down u/s wheel from the bottom of table and supply and fixing wheel as per existilnlg size and pattern complete all as specifed and directed. |
| 196 | Repairs to Table dining 4 persons for the following :-Taking down decayed top and supply and fixing new top 18mm thick pre-laminated particle board exterior grade with 4mm thick 1st class HW beading all around the edging complete all as directed. |
| 197 | Taking out decayed legs and provn of new legs made of 1st class hard wood all as directed. |
| 198 | Taking out decayed long rail and provn of new long rail made of 1st class hard wood all as directed. |
| 199 | Taking out decayed short rail and provn of new short rail made of 1st class hard wood all as directed. |
| 200 | Repairs toTable dinning ORs for the following :-Taking down decayed top and supply and fixing new top of 18 mm thick pre-laminated particle board exterior grade with 4 mm thick teakwood beading all around the edging complete all as specified and shown on drawings. |
| 201 | Material and labour for applying one coat of synthetic enamel paint of approved colour by spray painting including removing old painted surface by scraping complete all as specified and directed. |
| 202 | Removing of u/s legs of size 100 mm long ,25 mm size MS square tube and refixing the same in existing position of frame by welding complete all as specified and directed. |
| 203 | Removing of u/s cracked or decayed rubber shoes and replacing the same with new rubber shoes of best quality complete all as specified and directed. |
| 204 | Repairs to Table Office clerk for the following :-Taking down unserviceable decayed top and supply and fixing new top 18mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed. |
| 205 | Repalcing decayed bottom of drawer with new 6 mm thick ply wood, front side with 18mm thick pre-laminated particle board and all as directed. |
| 206 | Removing broken legs and supply and fixing new legs of 1st class hard wood and all as directed. |
| 207 | Supply and fixing new brass lock for drawer with duplicate key of existing pattern including removing old unserviceable lock. |
| 208 | Repairs to charpoy MS with hard top for the following :-Removing of unserviceable Plywood from charpoy ,welded to MS framing wherever required,scrapping off old painted surface and paint the surface with spray machine with two coats of synthetic enamel paint OG colour (Make- Berger/Shalimar/ Jenson & Nilchollson/Asian paint) complete as directed. |
| 209 | S&F new ply wood 12mm thick BWR, ISI marked with 4mm thick timber beading all around complete all as directed.. |
| 210 | Removing u/s shoes from legs and S&F new rubber shoes best quality as directed. |
| 211 | Repairs to Table dressing gents for the following:- Taking down decayed top and replaced with 12mm thick pre-laminated particle board exterior grade with one side teak face to the exposed surface all as directed. |
| 212 | Taking down decayed bottom and S&F new bottom with 12mm thick pre-laminated particle board exterior grade with one side teak face to the exposed surface all as directed. |
| 213 | Replacing decayed bottom, sides & back of drawer with new 6 mm thick ply wood, front side with 18mm thick pre-laminated particle board duly fitted with one no 25 mm knob of reqd colour complete all as directed. |
| 214 | Removing defade mirror with frame and replaced with new 5.5 mm thick electro copper plated mirror (Modi/Atul Saint Gobbin of size as shown in drawing with a frame cut to shape and fixed 12X20 mm HW and sloping on sides all as directed. |
| 215 | Repairs to Sofa 5 seater with cushion ;-Taking out u/s rear legs and provn of new legs made of 1st class HW and all as directed. |
| 216 | Taking out u/s front legs and provn of new legs made of 1st class HW and all as directed. |
| 217 | Taking out u/s long rails for 3 seater and provn of new rails made of 1st class HW and all as directed. |
| 218 | Taking out u/s long rails for single seater and provn of new rails made of 1st class HW and all as directed. |
| 219 | Taking out u/s short rails for 3 seater and provn of new rails made of 1st class HW and all as directed. |
| 220 | Taking out u/s seat frame for 3 seater and provn of new seat frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 221 | Taking out u/s back frame for 3 seater and provn of new back frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 222 | Taking out u/s seat frame for single seater and provn of new seat frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 223 | Taking out u/s back frame for single seater and provn of new back frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed. |
| 224 | Taking out u/s arm and provn of new arm made of 1st class HW all as directed. |
| 225 | Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 32 density,ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 450/- per RM) duly wraped with long cloth of existing pattern and as directed. |
| 226 | Material and labour for removing of old cane from various chairs such as chair dining,chair writing, chair easy,chair CB office etc.and replacing the same with new 2mm wide for main caning and border with 3 mm wide cane all as specified. |
| 227 | Material and labour for polishing /painting to various wooden furniture with French polish including removing of old polish complete all as directed:-(i) Chair Dining Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender