Tender For Provn Of Sewage Line From Defence Colony And Mes Key Personal Accn To The Existing Stp Of Mh Under Ge Stm Chennai.
Tender Value
43.35 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
12 days left
EMD
86700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Sewage Line From Defence Colony And Mes Key Personal Accn To The Existing Stp Of Mh Under Ge Stm Chennai.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and as directed. |
| 2 | Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick soft / loose soil complete all as specified and as directed. |
| 3 | Removing excavated material (soils) from site to a distance n.exc 50m away and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 4 | Supplying, laying, jointing, testing and commmisioning of DI Pipe as per IS 8329/ 2000 ISI marked, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches complete all as specified and as directed at site for the following sizes :-Note: - Earth work and joints shall be measured and paid separetely |
| 5 | 100 mm bore |
| 6 | 200 mm bore |
| 7 | M & L for DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the size 250mm dia confirming to IS: 9523 complete all as specified and as directed. |
| 8 | Supply, fixing, jointing & testing Cast Iron Sluice Valve of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.6, PD Short body, confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top complete all as specified and as directed.Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. |
| 9 | 100 mm dia (with cap) |
| 10 | 200 mm dia (with cap) |
| 11 | Supply, Installation, testing and comissioning of non clogs sewage subermsible pump 15 HP, 3 phase, 415 Volst complete all as specified and as directed.Make:- Kirloskar, Model No. ETERNA 11000CW 4P or equivalent make in Crompton, KSB, CRI. |
| 12 | Supply, Installation, testing and comissioning of non clogs sewage subermsible pump 5 HP, 3 phase complete all as specified and as directed.Make:- Kirloskar, Model No. ETERNA 3700 CW+ or equivalent make in Crompton, KSB, CRI. |
| 13 | S & F Star Delta Starter 3 Phase, 420 Volt AC suitable for 15 HP Submersible pump complete all as specified and directed. |
| 14 | S & F Star Delta Starter 3 Phase, 420 Volt AC suitable for 5 HP Submersible pump complete all as specified and as directed. |
| 15 | M & L for laying of 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches, including fittings materials, trenching, refilling & testing of joints complete all as specified and as directed. |
| 16 | PN - 16 Pipe, 25 mm OD |
| 17 | PN - 16 Pipe, 50 mm OD |
| 18 | PN - 16 Pipe, 110 mm OD |
| 19 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 Core complete all as specified and as directed. |
| 20 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 Core complete all as specified and as directed. |
| 21 | Supply and installed lifting tripod (or gantry) with a hoist capacity upto 3 Ton for pump installation and removal typically complete all as specified and as directed. |
| 22 | Supply and Fixing MS base channel of size as per site requirement including cutting, welding and making hole including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 23 | Supplying and laying burnt fly ash bricks class standard size for protection of under ground cable complete all as specified and as directed. |
| 24 | Supply and laying sand in trenches for protection of cable sand cushioning to cable 8 cum thick below cable and 15 cum thick above cable in layers complete all as specified and as directed. |
| 25 | Excavation over areas not exc 1.5 mtr in depth and getting out in hard/ dense soil complete all as specified and as directed. |
| 26 | Excavation over areas exc 1.5m in depth and n.exc 3m depth getting out in hard/ dense soil complete all as specified and as directed. |
| 27 | Excavation over areas exc 3m depth getting out in hard/ dense soil complete all as specified and as directed. |
| 28 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sqm on plan and n exc 1.5m in depth and getting out in hard dense soil complete all as specified and as directed. |
| 29 | Excavating in trenches, exc 1.5m wide and n.exc 3m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sqm on plan and n.exc 1.5m in depth and getting out in hard dense soil complete all as specified and as directed. |
| 30 | M & L for PCC 1:4:8 type D-2 using 40mm graded granite stone aggregate for foundation of manholes complete all as specified and as directed. |
| 31 | M & L for PCC 1:2:4 type D-2 using 40mm graded granite stone aggregate for foundation of manholes complete all as specified and as directed. |
| 32 | M & L for flyash brick work with sub class 'B' bricks, straight or curved on plan exc 6 mean radius with old size bricks built in CM 1:6 complete all as specified and as directed. |
| 33 | M & L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating, as directed and necessary form work complete all as specified and as directed. |
| 34 | M & L for rendering 15mm thick in CM 1:4 mixed with Water proofing compound on internal/ external fair faces of brick work or concrete surface finished even and smooth using extra cement complete all as specified and as directed.Note:- Water proofing compound shall be measured seperately. |
| 35 | Supply only integral water proofing compound |
| 36 | M & L for PCC 1:3:6 type C-2 using 40mm graded granite stone aggregate for concrete bed to 300mm dia pipe including packing under and completely surrounding pipas with concrete after they are laid and tested complete all as specified and as directed. |
| 37 | M & L for Reinforced concrete pipes, of 300mm bore class NP3, laid and jointed complete with collars complete all as specified and as directed. |
| 38 | M & L for reinforced cement concrete (nominal mix) Type A-1 1:1.5:3 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and shelves like complete all as specified and as directed. |
| 39 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n.exc 200mm thick horizontal complete all as specified and as directed. |
| 40 | M & L for Precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab for manholes set in CM 1:4 including necessary form work complete all as specified and as directed. |
| 41 | S & F mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking,bending,hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 42 | M & L for PCC 1:3:6 type C-2 using 40mm graded granite stone aggregate for concrete bed to 150mm dia pipe incl packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and as directed. |
| 43 | M & L for Reinforced concrete pipes, of 150mm bore class NP3, laid and jointed complete with collars complete all as specified and as directed. |
| 44 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching complete all as specified and as directed. |
| 45 | Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS: 10910, on 12mm dia steel bar conforming to IS: 1786, having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 1 12mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30 x 20 x 15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. |
| 46 | Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface, in hard/ dense soil complete all as specified and as directed. |
| 47 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50 x 50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete all as specified and as directed.Made of G.I. wire of dia. 4mm, PVC coated to achieve outer dia not less than 5mm in required colour and shade. |
| 48 | S&F Hand rail posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed. |
| 49 | S & F Mild steel Diameter of neck, 11 to 15mm screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long complete all as specified and as directed. |
| 50 | S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings (exclusive of steel, sheeting or other cvering, running rails and guides) and hanging; also fastening and fixing complete cconforming to grade Fe-410 (Gde-E-250) quality A(b) RCC pillar/ brick pillar and painting to steel surface including all connected items shall be measured and paid seperately under relevant items. (iii) Design as per directed by Engr-in-Charge. |
| 51 | M & L for two coats of synthetic enamel paint over a coat red oxide primer incl preparing Surfaces of any description, n.exc 10cm in width or girth,not otherwise described complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender