Tender For Repairs To Internal Water Supply, Plumbing And Sanitary Work For Md Accn Of Zone A At Age B/R-I Under Ge (West) Agra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Sep 2026
10 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Internal Water Supply, Plumbing And Sanitary Work For Md Accn Of Zone A At Age B/R-I Under Ge (West) Agra
BOQ
| Sl. No. | Item Description |
| 1 | S&F in replacement 15mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engr -In-Charge. |
| 2 | Refixing old steel tubing 15 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) with new fitting complete all as specified and directed by Engr -In-Charge. (Note- old servisible pipe obtain from BOQ item no 1 will be used) |
| 3 | S&F in replacement 20 mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engr -In-Charge. |
| 4 | Refixing old steel tubing 20 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) with new fitting complete all as specified and directed by Engr -In-Charge. (Note- old servisible pipe obtain from BOQ item no 3 will be used) |
| 5 | S & F in replacement 20 mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 including complete fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr -In-Charge. |
| 6 | S & F in replacement 16 mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 including complete fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr -In-Charge. |
| 7 | S & F in replacement 25 mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 including complete fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr -In-Charge. |
| 8 | S&F in replacement rotational moulded polyethene water storage tank 500 ltr capacity, three layer, hoisted and fixed in position including PVC cover, plug, 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) and check nuts complete all as specified and directed by Engr -In-Charge. |
| 9 | S&F in replacement rotational moulded polyethene water storage tank 1000 ltr capacity, three layer, hoisted and fixed in position including PVC cover, plug, 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) and check nuts complete all as specified and directed by Engr -In-Charge. |
| 10 | S&F in replacement 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in charge. |
| 11 | S&F in replacement 1mm thick Steel sheet duccan suitable screws for 500/1000ltr PVC tank (For Monkey mirace), design and size approved by complete all as specified and directed by Engr -In-Charge. |
| 12 | M&L in replacement 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ( minimum weight 210 gms) complete all as specified and directed by Engr -In-Charge. |
| 13 | S&F in replacement stop valve (external threaded) cast copper alloy fancy type, brass chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union and fixed in bore of pipe 15mm, complete all as specified and directed by Engr -In-Charge. |
| 14 | S&F in replacement 15mm bore (external threaded) bib taps cast brass alloy cromium plated long body fancy type with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr -In-Charge. |
| 15 | S&F in replacement angle valve in replace cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union, bore of pipe 15 mm, complete all as specified and directed by Engr -In-Charge. |
| 16 | S&F in replacement 15 mm bore pillar taps brass alloy with capatan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD\\" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr -In-Charge. |
| 17 | S&F in replacement 15 mm bore brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr -In-Charge. |
| 18 | S&F in repair 15 mm bore brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr -In-Charge. |
| 19 | S & F in replacement 15mm bore angle valves fancy type two way brass CP with long shank and cup screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr -In-Charge. |
| 20 | S&F in replacement 15mm PTMT bore (external threaded) bib taps long body fancy type with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr -In-Charge. |
| 21 | S&F in replacement 15mm dia PTMT angle valve in replace high pressure with crutch or butter fly handle screw both ends for iron pipe or for union, complete all as specified and directed by Engr -In-Charge.. |
| 22 | S&F in replacement 15 mm bore PTMT pillar taps/Sink tap Swan neck high pressure with or without lettered 'HOT' or 'COLD\\" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr -In-Charge. |
| 23 | S & F in replacement 15mm bore PTMT angle valves fancy type two way with long shank and cup screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr -In-Charge. |
| 24 | S&F in replacement Cabinate Mirror(400x500mm) PTMT complete all as specified and directed by Engr -In-Charge. |
| 25 | S&F in replacement 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engr -In-Charge. |
| 26 | S&F in replacement sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated SS bracket guard and railing 60cm long complete all as specified and directed by Engr -In-Charge. |
| 27 | S & F in replacement SS Soap dish chromium plated complete all as specified and directed by Engr -In-Charge. |
| 28 | S & F in replacement Toilet paper holder chromium plated SS complete all as specified and directed by Engr -In-Charge. |
| 29 | S & F in replacement SS towel rail 20 mm dia D type 600 mm long between flanges complete all as specified and directed by Engr -In-Charge. |
| 30 | S&F in replacement brass CP ABS health faucet with 1.5 m PVC connection as in replace complete all as specified and directed by Engr -In-Charge. |
| 31 | S & F in replacement 150mm dia ABS CP swivel shower rose complete all as specified and directed by Engr -In-Charge. |
| 32 | S&F in replacement stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495.mm x420mm with bowl size 410mm x 330mm x160mm complete all as specified and directed by Engr -In-Charge. |
| 33 | S&F in replacement stainless steel sink with dranage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495.mm x420mm with bowl size 410mm x 330mm x160mm complete all as specified and directed by Engr -In-Charge. |
| 34 | S&F in repair plate rack of 1mm thick stainless steel of size 900x750mm with three shelves complete all as specified and directed by Engr -In-Charge. |
| 35 | S&F in replacement 32 mm bore PVC pipe as in waste pipes for sinks & WHBs complete all as specified and directed. |
| 36 | S&F in replacement PVC connections 15mm size, 450mm long with PTMT nuts on both ends complete all as specified and directed by Engr -In-Charge. |
| 37 | S&F in replacement flushing cistern 10 Ltrs capacity low level white with inlet ball & float valve and handle including brackets complete all as specified and directed by Engr -In-Charge. |
| 38 | S&F in replacement Internal kit including flush handle & float for low level flushing cistern complete all as specified and directed by Engr -In-Charge.(Make- prayag or equvelent in relavent X categary). |
| 39 | S&F in replacement PTMT waste coupling (half/full threaded) fixed with 32mm dia discharge pipe for WHB/Kitchen sink (Minimum weight 32mm- 45gms) complete all as specified and directed by Engr -In-Charge. |
| 40 | S&F in replacement 100mm dia PTMT grating (Min weight 25 gms) complete all as specified and directed by Engr -In-Charge. |
| 41 | S & F in replacement PVC (SWR) nahani trap, plain with grating including jointing with solvent cement 75 mm complete all as specified and directed by Engr -In-Charge. |
| 42 | S&F in replace vitreous china wash basin white flat back, size 550X400 mm excluding taps, waste chain & plug porcelain stopper but including brackets, waste pipe, PVC connection CP waste copuling complete all as specified and directed by Engr -In-Charge. |
| 43 | S & F in replacement Vitreous china wash hand basin coloured, Table top type including cutting for or pinning complete including 32 mm CP brass waste fitting 32 mm PVC waste pipe, cast iron brackets and PCC 1:2:4 type B-1 using graded stone aggregate for embedding brackets and making good disturbed surface CM 1:3 complete all as specified and directed by Engr -In-Charge. |
| 44 | S & F in replacement Vitreous china wash hand basin coloured, Table sunk type including cutting for or pinning complete including 32 mm CP brass waste fitting 32 mm PVC waste pipe, cast iron brackets and PCC 1:2:4 type B-1 using graded stone aggregate for embedding brackets and making good disturbed surface CM 1:3 complete all as specified and directed by Engr -In-Charge. |
| 45 | M&L 18/20mm thick black granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills, cooking plateforms and like in premix cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of stone including rounding and moulding of edge and making hole for cooking gas pipe above 10mm thick screed bed 1:4 or Chemical adhesive as per requirement including Dismantling floor, hearth wall tiling and including cement and sand mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed by Engr -In-Charge.(Note- Colour/shed approved by Eng in charge) |
| 46 | S&F in replacement white Vitreous china European wash down water closet (Pedestal pattern) pan fixing with bolts including connecting to 100mm bore CI ‘P’ or ‘S’ trap, seat cover, complete all as specified and directed by Engr -In-Charge. |
| 47 | S & F in replacement Vitreous china ware wash down water closet pan, pedestal pattern with combined chinaware flushing device (CASCADE) coloured, including plastic WC seat cover same colour closed pattern water jet for WC including PVC pipe connection etc, complete all as specified and directed by Engr -In-Charge. |
| 48 | S & F in replacement Vitreous china ware wash down water closet pan,wall hange with chinaware flushing device coloured, including plastic WC seat cover same colour closed pattern water jet for WC including PVC pipe connection etc, complete all as specified and directed by Engr -In-Charge. |
| 49 | S&F in replacement vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe and including concrete bedding) complete all as specified and directed by Engr -In-Charge. |
| 50 | S&F in replacement Plastic seat cover for EWC solid type complete all as specified and directed by Engr -In-Charge. |
| 51 | S&F in replacement PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 110mm and all projected type iron clamp should be propper fixed from wall height upto 12.00 Rm complete all as specified and directed by Engr -In-Charge. |
| 52 | S&F in replacement PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 75 mm and all projected type iron clamp should be propper fixed from wall height upto 12.00 complete all as specified and directed by Engr -In-Charge. |
| 53 | S&F in replacement PVC (SWR) bends (with access door) of 110mm radius to PVC SWR pipes complete all as specified and directed by Engr -In-Charge. |
| 54 | S&F in replacement PVC (SWR) bends (with access door) of 75mm radius to PVC SWR pipes complete all as specified and directed by Engr -In-Charge. |
| 55 | S&F in replacement PVC (SWR) 110mm branch piece (with access door) ,single (single Y) equal or unequal complete all as specified and directed by Engr -In-Charge. |
| 56 | S&F in replacement PVC (SWR) 75mm branch piece (with access door) ,single (single T) equal or unequal complete all as specified and directed by Engr -In-Charge. |
| 57 | S&F in replacement Cast iron soil, waste and vent pipes in any length with or without ears, with cementjoints, laid in wall 110mm and all projected type iron clamp should be propper fixed for wall height upto 12.00 Mtr complete all as specified and directed by Engr -In-Charge. |
| 58 | S&F in replacement Cast iron soil, waste and vent pipes in any length with or without ears, with cementjoints, laid in wall 75mm and all projected type iron clamp should be propper fixed for wall height upto 12.00 mtr complete all as specified and directed by Engr -In-Charge. |
| 59 | S&F in replacement Cast iron bends (with oval access door) of 100mm radius to CI pipes complete all as specified and directed by Engr -In-Charge. |
| 60 | S&F in replacement Cast iron bends (with oval access door) of 75mm radius to CI pipes complete all as specified and directed by Engr -In-Charge. |
| 61 | S&F in replacement cast iron 100mm branch piece, (with oval access door) single (single Y) equal orunequal complete all as specified and directed by Engr -In-Charge. |
| 62 | S&F in replacement cast iron 75mm branch piece, (with oval access door) single (single T) equal orunequal complete all as specified and directed by Engr -In-Charge. |
| 63 | S & F in replacement stainless steel curtain rods upto 1.5 length or 25mm dia as in doors/windows SS brackets fancy type including screws and other necessary fitting (Knob) for fixing brackets for 25mm dia dropry rod fixed at each end of rods complete all as specified and directed by Engr -In-Charge. |
| 64 | S & F in replacement stainless steel curtain rods 1.5 mtr to 2mtr length or 25mm dia as in doors/windows SS brackets fancy type including screws and other necessary fitting (Knob) for fixing brackets for 25mm dia dropry rod fixed at each end of rods complete all as specified and directed by Engr -In-Charge. |
| 65 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .06 Sqm but not exc 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over and including 12 mm thicksmart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for screed bed or bedding layer of complete all including dismantling of old tile including cement and sand mortar, bedding complete all as specified and directed by Engr -In-Charge. |
| 66 | M&L for non skid coloured tiles 7.5 to 10mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.36 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 12mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for screed bed or bedding layer of complete all including dismantling of old tile including cement and sand mortar, bedding complete all as specified and directed by Engr -In-Charge. |
| 67 | M&L for coloured glazed ceramic tiles in vertical surface 300x450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 12mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for cement plaster on brick wall complete all including ismantling of old tile including cement and sand mortar, bedding complete all as specified and directed by Engr -In-Charge. |
| 68 | M&L 18/20mm thick Z black granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills, cooking plateforms and like in premix cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of stone including rounding and moulding of edge and making hole for cooking gas pipe including Dismantling floor, hearth wall tiling and including cement and sand mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed by Engr -In-Charge. |
| 69 | M&L Machine cut kota stone slab for 18-20mm thick fix with cement and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 12mm thick ready mix plaster, rubbing and polishing complete all including dismantling of old tile including cement and sand mortar, bedding complete all as specified and directed by Engr -In-Charge. |
| 70 | M&L for Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in floor/plinth protection etc and similar work Demolition of cement concrete (unreinforced) in any description and in any position complete all as specified and directed by Engr -In-Charge. |
| 71 | M&L for 5 mm thick smart care ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) ceiling surface and preparation of newly plastered surfaces of ceiling and applying three coat of white wash complete includingTaking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water all as specified and directed.by Engr -In-Charge |
| 72 | M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over interior surface of wall including M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of Birla putty to make smooth surface including taking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr -In-Charge. |
| 73 | M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over exterior surface of wall M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of thick waterproofing putty complete including taking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water all as specified and directed by Engr -In-Charge. |
| 74 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6complete including demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles all as specified and directed by Engr-In-Charge. |
| 75 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 except bricks, complete all as specified and directed by Engr-In-Charge. (Note- old servisible bricks obtain from item no 74 will be used) |
| 76 | M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over interior surface of wall and M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over a coat of primer over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed. |
| 77 | M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over exterior surface of wall and M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over a coat of primer complete all as specified and directed. |
| 78 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed. |
| 79 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed. |
| 80 | S&F factory made solid moulded PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement complete all as specified and directed. |
| 81 | S & F Solid PVC door frame for PVC doors, Kitchen cabinet of size 50mm x 47mm made out of 5mm PVC sheet reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed. |
| 82 | S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 83 | S&F 150 mm long aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 84 | S&F 100 mm long stainless steel hinges type B-12 complete all as specified and directed. |
| 85 | M&L for factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, 5mm thick glass, all complete as per approved drawing & direction of Engineer-in-Charge. |
| 86 | Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below and procedure as per Appendix'A' of particular specifications. |
| 87 | (a) S & F of drainage spout GI pipe 40mm dia bore light grade upto outside or outer wall ( Apprx 450mm to 600mm long). |
| 88 | (b) M & L for PCC 1:5:10 type E20 (using 40mm graded stone agg) 50mm thick laid in slope towards drainage out spout pipe mixed with waterproofing chemical as per manufacturer instructions of MAKE: FOSROC/SIKA/PEDILITE/STP Khurra 150mmx150mm (min) at appropriate location for free flow (of leaked water if any) towards drainage spouts shall be provided integrally while laying PCC. Fixing of spout shall be done with same PCC as in this item. |
| 89 | (c) M & L for 18mm thick cement plaster in premix plaster on verticalfaces mixed with water proofing chemical of Make: 301 Pidicrete URP of Dr Fixit or other techno commercially equvalent Make of : SIKA/Pedilite/FOSROC/STP. |
| 90 | (d) Items No(C) shall be executed while concrete is green as per item No 40(c) above and proper curing and ponding test shall be done before laying dfrainage water supply pipes upto the entire satisfaction of Engineer-In-Charge. |
| 91 | (e) Applying two coats of SIKA TOP seal 107 of SIKA or other techno commercially Equivalent Make of FOSROC/Pidilite/Dr Fixit/STP on vertical as well as horizontal surface. |
| 92 | (f) Drainage and water supply pipe if required and test for leakage /sanitary pipes and shall be laid to slope and a clear gap underneath the pipes shall be made avbailable by providing suitable cement concrete block. |
| 93 | (g) M & L PCC 1:5:10 type E-2 using 10-40mm graded stone aggregate as reqd depth at site over and including 150mm thick 20mm single sized stone agg to provide a filter media. |
| 94 | (h) M&L PCC 25mm thick 1:2:4 type B-0 using 12.5 mm grade stone aggregate as level course. |
| 95 | (j) M&L for 7 to 8 mm thick non skid ceramic coloured joint less tiles (aquare/rectangur) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc laid jointing in neat cement slurr and pointed filled with epoxy chemical Make :- SIKA/FOSROC/PIDILITE/Dr Fixit/STP mixed with pigment to match with shade of tiles over and including 15mm thick screed bed premix plaster complete all as specified and directed. |
| 96 | (k) Note for item : (i) Waterproofing treatment shall be undertaken alongwith laying of drainage pipe/sanitary pipes/drainage spout etc.(ii) The work shall be carried out as per the direction of Engineer-In-Charge.(iii) The sunken treatment work shall only be carried out after written approval of Engineer in charge for leakage/seapage of water/ sanitary pipes.(iv) Cost of drainage spout shall deemed to be included in the item however sanitary pipe, water pipe line if required shall be paid separately under respective items.(v) Laying of chemical required for varios applications shall be as per manufacturer instructions.(vi) Plan area shall only be measured and paid. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender