Tender For Special Repairto Bldg No P-477 Badminton Court At Af Stn Car Nicobar. 8858/E8
Tender Value
48 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
10 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nicobar → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairto Bldg No P-477 Badminton Court At Af Stn Car Nicobar. 8858/E8
BOQ
| Sl. No. | Item Description |
| 1 | M & L careful dismantaling and removal of existing Teak/Maple wood squash court flooring system, including top finished boards, underlayment, sleepers, and shock-absorbing ruuber pads. The scope includes staking of reusable material or disposal of debris outside the premises as directed by Engineer-in-Charge. Rate shall include all labor, tools, and equipment required for the task. |
| 2 | Material and Labour for Supply and installation of ITF certified 8 layers’ acrylic sports flooring system with thickness up to 3mm. The flooring should be certified by International Tennis Federation (ITF) and should have application as first layer of primer (100% acrylic latex-based emulsion to improve bond of acrylic court system to the asphalt surface having consumption ratio of 0.014 kg/sq. ft.), second layer of acrylic Resurface (Filling and smoothing asphalt or concrete surfaces in preparation for acrylic court system. It should also fill the surface chips, voids and conceals repairs while providing a smooth surface for colour coating. It should have a consumption ratio of 0.046kg/sq. ft.), Third, Fourth & Fifth layer of Uni-rubber liquid cushion layers at a consumption ratio of 0.10 kgs per sq. ft. altogether, Sixth & Seventh layer of Pre-coat (Quartz filled % 100 acrylic latex based textured topcoat with consumption ratio of 0.078kg/sq. ft.) and Eighth layer of Topcoat (100% acrylic latex polymer & colour coat for the finished surface to protect from UV). It should have consumption ratio of 0.023 kg/sq. ft.) on top of these 8 layers; the line marking should be done with Over line paint (100 % acrylic latex based high hiding line paints. It should have consumption ratio of 4 kg/court). The acrylic resurface must have silica sand infill to be embedded into it with consumption ratio of 0.065 kg/sq. ft. The product must be approved by the respective International Sports Federation and used at the Indian/International championships recognized by the respective Regional/International Sports federation, complete in all respects as per manufacturer's specifications and directions of the Engineer-in-Charge.Make: SportMaster/ Pidilite Industries/ Fosroc/ Conica/ Unica |
| 3 | Material and Labour for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in sub base of floors including necessary form work complete all as specified and as directed. |
| 4 | Material and Labour for 75mm thick plain cement concrete 1:2:4 type B2 using 40mm graded granite stone aggrgate as floor and other similar type of work, laid in panels and finishing cement concrete surface even and smooth Without using extra cement, complete all as specified and as directed. |
| 5 | Dismantling floor, hearth or wall tilling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 6 | M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade, incl 15 mm thick rendering in CM (1:6) complete all as specified and directed. |
| 7 | M&L for digital design glazed ceramic coloured tiles in vertical surface of size of each tile 300 x 450 mm /350x250 mm and 7 to 8 mm thick fixed to set and joint in neat cement slurry and pointed in white or coloured cement to match the same complete all as specified and directed. |
| 8 | Taking up or down steel tubing /CPVC pipe 15 mm bore including connections, cleaning for refixing or removal to store all as directed. |
| 9 | Taking up or down steel tubing 20 mm bore including connections, cleaning for refixing or removal to store all as directed. |
| 10 | Taking down existing unserviceable water tank after disconnecting water supply line and Supply and fix Rotational moulded Polyetheylene Water Storage Tank 1000 Ltr capacity Triple Layer (Cylinderical verticle with closed top) including 20mm dia GI Medium Grade 450mm long overflow and wash out pipe each with all required fittings, Checknut, Stopper etc complete hoisted and fixed in position, including all incoming and outgoing connection of GI pipe complete and including 25mm PTMT Ball valves high pressure wiith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete for 20mm dia pipe fixed on roof top complete all as specified and directed. |
| 11 | Supply and fixing galvanised steel water tubing medium grade 15 mm bore including all necessary fittings such as bends, L bows, short piece connections, backnuts, caps plugs, unions couplings, flanges, sockets etc, fixed to wall/floor/ceiling including necessary cutting/chauging in walls made of brick/concrete surface complete all as specified and as directed. |
| 12 | Supply and fixing galvanised steel water tubing medium grade 20 mm bore including all necessary fittings such as bends, L bows, short piece connections, backnuts, caps plugs, unions couplings, flanges, sockets etc, fixed to wall/floor/ceiling including necessary cutting/chauging in walls made of brick/concrete surface complete all as specified and as directed. |
| 13 | Supply and Fix in repairs Vitreous china European type water closet with flushing cistern of size 780 x 375 x 700 mm including trap set, seat cover and fixing of flushing cistern, brackets, flushing pipe etc, etc. with 'P' or 'S' trap, making good the floor to match with existing floor complete all as specified and as directed.MAKE : Hindware , Jaquar |
| 14 | Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified . |
| 15 | Supply and fixing in repairs vitreous China wash hand basin, white (flat back or angle back type or counter top) of size 630X450mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc all as specified and as directed.MAKE : Hindware , Jaquar |
| 16 | Supply and fixing Vitreous China full stall urinal bowl type (back or corner wall type), white , of size 465mm x 355mm x 265mm complete with chromium plated waste fittings including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing arround urinal back in cement, (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and as directed. |
| 17 | Supply and Fixing in repairs stop valves/angle cock, 15mm bore, fancy type, with long shank & cut concealed type chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.MAKE : Hindware , Jaquar |
| 18 | Supply and fix in repair fancy type 15mm dia pillar tap, cast copper alloy, chromium plated, with capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe Make: CERA /Parryware/Hindware |
| 19 | Supply and fixing in repair 6 mm thick bevelled edge looking mirror of size 600 x 450 mm mounted on 6 mm thick AC Building board or commercial plywood/hard board backing and fixed to wooden plugs with CP Screws and cup washers all as specified and as directed. |
| 20 | Supply and fix soap dish vitireous china white 160x160x90mm (Approximate) complete all as specified and as directed. |
| 21 | Supply and fixing in repairs urinal partition , vitreous china, white, of size 310mmx770mmx50mm all as specified and as directed. |
| 22 | Supply and fixing in repairs Towel rails tubular brass chromium plated 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed. |
| 23 | Supply and fixing in repairs 15mm bib tap standard of PTMT any colour fancy type long body high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 105 gms) etc complete all as specified and directed. |
| 24 | Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 25 | Demolition and breaking up 110mm bore drain pipes (RCC pipe/Salt glazed ware or Reinforced concrete) set in cement mortar including haunching and removing debris to a distance exc 1.5Km and n.exc 5Km all as specified and as directed. |
| 26 | S&F in repair PVC (SWR) pipes 110 mm dia. single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 27 | S&F PVC (SWR) bend 110 mm dia with access door complete all as specified and as directed. |
| 28 | Supply and fix in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed suitable for 15 mm ISI marked and taking down unserviceable ball valves all as specified and as directed. |
| 29 | S&F PVC (SWR) junction single 110 mm bore, (single T) equal or unequal with access door complete all as specified and as directed. |
| 30 | Supply and fix PVC (SWR) floor trap , plain with grating including jointing with solvent cement 75mm bore complete all as specified and as directed. |
| 31 | Supply and fix stop valves/angle cock, 15mm bore, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 32 | Supply and fix in repairs 2 way angle valves/2 in 1 angle cock, 15mm bore,quarter turn with wall flange, chromium plated, screwed down, high pressure with crutch or butterfly handle and fixed complete all as specified and directed. |
| 33 | Supply and fix Gun metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 34 | Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 35 | Supply and fix in repair waste coupling of cast copper alloy 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc all as specified and as directed. |
| 36 | Supply and fixing in repairs PVC waste pipe 32mm dia with 40mm dia reducer, 90cm long for WHB/urinal outlet with 4 Nos screws for fixing pipes, complete all as specified and directed. |
| 37 | Supply and fix in repairs stainless steel grating 125 mm dia with waste pipe hole complete all as specified and as directed. |
| 38 | Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water, removing rubbish/debris etc complete all as specified and as directed. |
| 39 | Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed. |
| 40 | Material and labour for 15 mm thick rendering on brick/concrete surfaces in two layers in CM 1:4, finishing coat of 5mm thick, finished even and smooth without using extra cement complete all as specified and as directed. |
| 41 | Material and labour for preparation of of new plastered/concrete surfaces of walls and applying two coats of acrylic distemper of approved shade/tint over a coat of primer, over 1mm thick wall care putty finish to achieve uniform smooth surface of wall all as specified and as directed. |
| 42 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 43 | M&L for complete removal by Washing, rubbing down and stopping and preperation of distempered and painted surfaces of walls, pillars,cornices by brooming down etc including filling depressions of scrapped surfaces with wall care putty (1 mm thick) and preparation of surfaces for further treatment and applying two coats of distemper oil emulsion over a coat of primer complete all as specified & directed. |
| 44 | Material and labour for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over old surfaces complete all as specified and directed. |
| 45 | Material and labour for preparation of new or previously untreated steel surface over 10 cm width or girth and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 46 | Material and labour for 15 mm thick rendering on brick/concrete surfaces in two layers in CM 1:4, finishing coat of 5mm thick using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound shall be measured separately. |
| 47 | Supply only integral water proofing compound all as specified and as directed. |
| 48 | Supply and Fixing Heat absorbing glass, 3mm thick and glazing complete with beads fixed with brass screws in square exc 1.5 sqm in each pane complete all as specified and as directed. |
| 49 | Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (without taking off shutters from the frame) complete all as specified and directed. |
| 50 | Material and labour taking down chowkhats or frames, without taking off shutters from the frame not exceeding 1.5 Sqm in each and removing complete all as specified and directed. |
| 51 | Supply and fix Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.Note : Glass panel/particle board panel filling shall be measured and paid separately. |
| 52 | Supply and fix powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, and sliding tower bolt 150mm long anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 53 | Supply and fix for powder coated, Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 54 | Supply and fix Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum coating of grade AC 15) of DG 102 design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. |
| 55 | Supply and fix Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with Aluminium alloy wire staples complete all as specified and directed |
| 56 | Supply and fix in 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21complete all as specified and directed. |
| 57 | Supply and fixing aluminium alloy,anodised, sliding door bolt of length 250mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed. |
| 58 | Supply and Fix 150mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge. |
| 59 | Supply and Fixing 5.5mm thick ordinary quality glass with film cover, ordinary quality and glazing with oil and putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 60 | Supply and fix Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacture's complete all as specified and as directed. |
| 61 | Supply and fixing Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supporting & fixing in opening as per specification & drawing complete all as specified and directed. |
| 62 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plian colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing of SSR Part II. |
| 63 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. |
| 64 | M&L point wiring complete with 1.5 Sqm sincle core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel duly painted concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, all as specified and as directed for the following :- |
| 65 | (a)One light point or one light/ exhaust fan/ fan point controlled by one switch |
| 66 | (b) One 3 pin socket outlet 5 Amps on same board |
| 67 | (c) one 3 pin socket outlet 5 Amps point controlled by one switch on Independent board. Please Enable Macros to View BoQ information |
| 68 | (c) one 3 pin socket outlet 5 Amps point controlled by one switch on Independent board. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender