Tender For Special Repair To Urc Bldg No T-8 Of Inf Bde C At Shahjahanpur Cantt Under Ge (East) Bareilly
Tender Value
47.31 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
2 days left
EMD
94600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Urc Bldg No T-8 Of Inf Bde C At Shahjahanpur Cantt Under Ge (East) Bareilly
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-Sep-2026 |
| 2 | 30-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down of chowkhats or frame exc 1.5 Sqm but n.exc 4.0 Sqm (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkhats or window frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and directed. |
| 3 | Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed by Engr-in-Charge |
| 4 | Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete. |
| 5 | S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (coating of AZ 150 GSM) as in roof covering/cladding to wall, fixed with self tapping screws as specified . |
| 6 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa (coating of AZ 150 GSM) as in ridges, roof covering/cladding to wall,fixed with self tapping screws as specified |
| 7 | Taking down of existing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa carefully without damagiing the sheet and refixing the same with new self tapping screws with existing frame work complete as specified . |
| 8 | M&L roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings, and heavy bracket framing (Beam, tee,channel, angle or flat sections ) incl distance pieces, cleats confirming to Fe 410-W gde 250 quality A etc complete all as specified and as directed. |
| 9 | M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed. |
| 10 | S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and including decorative laminate 0.60 mm thick type 1 of surface finish and other side balancing white laminate 0.30 mm thick, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 11 | S&F 35mm thick 1st class softwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 12 | S & F of pressed steel frames for doors 165 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 13 | M & L for PCC type B-0 1:2:4 as in roof kerbs or mud stops, rounded or chamfered on edges, fixing of hold fasts, and filling of pressed steel frames complete all as specified and directed. |
| 14 | S&F Providing and fixing factory made uPVC white color sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 15 | S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note: S&F rates, include for anodised aluminium hard ware as indicated, pvc roller, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames. |
| 16 | M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes.framed guard bars iron doors.ladders framed balusters, walk ways. Railings, frame work of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed. |
| 17 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed. |
| 18 | S& F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 19 | M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundation footing, Plinth, lintel / roof beam complete all as specified and directed. |
| 20 | M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 21 | S&F form work to sides of concerte, foundation, footings base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to butter as specified and directed. |
| 22 | S&F form work to sides of formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work vertical as specified and directed by GE. |
| 23 | S&F mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 24 | S&F 300mm long stainless steel grade 304 sliding door bolts, bolt or clip type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifieed and directed. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position complete as per direction of Engineer-in-Charge. |
| 26 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge as per specification & drawing complete all as specifed and directed. |
| 27 | S & F of 200 mm long stainless steel grade 302 barrel barrel tower bolts and fixed as specified and as directed. |
| 28 | S&F 100 mm long butt hinges, 2.00 mm thick (minimum) stainless steel grade 304 with SS hinge pin and fixed complete all as specified and directed. |
| 29 | S&F 150 mm stainless steel grade 302 handles 3.00 mm thick (minimum) complete all as specified and as directed. |
| 30 | M&L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying Two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 31 | Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing , steps, cills, sunshade , shelves,lintels, etc and cutting chases for concealed conduit wiring , etc and making good, cutting not exc 20 cm girth all as specified and as directed. |
| 32 | S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floor all as specified and as directed. |
| 33 | S&F curtain rod 25mm dia , mild steel, chormium plated/pvc coated with fixing bracket, stops,rollers etc for hangging curtain rod complete all as specified and directed. |
| 34 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. |
| 35 | M & L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in colour cement over and including 10 mm thick in CM 1:4 complete all as specified and as directed. |
| 36 | M&L providing non skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. |
| 37 | M&L for polished glazed vitrified tiles light shade 10 mm thick (square/rectanglar) polished area of each tiles exceeding 0.72 sqm in floor etc set and jointed in neat cement slurry over and over and including 15 mm thick screed bed of cement mortar in 1:4 and pointed in white or coloured cement to match coloured tiles complete all as specified |
| 38 | M&L providing polished glazed vitrified tiles light shade 8-10 mm thick (square /rectanglar) polished area of each tiles exceeding 0.72 sqm in dado/ skirting etc set and jointed in neat cement slurry over and including 10 mm thick cement mortar rendering in 1:4 and pointed in white or coloured cement to match coloured tiles complete all as specified |
| 39 | M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4 with WPC on roof surfaces complete all as specified and directed by GE. |
| 40 | M & L for machine cut kota stone slab flooring 20-25mm thick including 20 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 41 | M & L for machine cut kota stone slab 20-25mm thick, as in riser of steps, skirting, dado and pillar including 10 mm thick cement plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 42 | Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc all as specified and directed. |
| 43 | M&L rendering 15mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement all as specified and directed. |
| 44 | M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement complete all as specified and directed. |
| 45 | M&L for two coat of (2 mm thick minimum) wall care cement wall putty on old/newly plastered of walls all as specified and directed |
| 46 | M & L for finishing walls with two coat of acrylic distemper over a coat of primer after complete removal of existing surfaces of wall or on new plastered surfaces of wall complete all as spd. |
| 47 | M & L for finishing walls with two coat of cement base paint over a coat of alkali primer after complete removal of existing surfaces of wall or on new plastered surfaces of wall complete all as spd. |
| 48 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 49 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Brushing neat cement slurry with 3.0kg of cement per sq. metre |
| 50 | M&L for machine pressed cement concrete tiles 25cm x 25cm x 22mm thick with grey cement and pigment, set over including 15 mm thick screed bed in cement mortar 1:6, jointed and pointed and set in neat cement slurry on floors complete all as specified and directed. |
| 51 | M&L 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone agg) as in plinth protection /Path finishing cement concrete even and smooth without using extra cement all as specified and directed. |
| 52 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests, P Trap and concrete in PCC 1:4:8 type D-2 including connection to drain or out going pipe and flush pipe etc complete all as specified and as directed. |
| 53 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed. |
| 54 | S&F plastic water closet soft closing seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and directed. |
| 55 | S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 56 | S & F in repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed. |
| 57 | S&F in repair vitreous china wash basin white, padestal pattern size 550 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe complete all as specified and directed |
| 58 | S&F in repair only 32mm dia waste fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.complete all as specified and directed. |
| 59 | S&F repair 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed. |
| 60 | S&F in repairs bib taps 15mm bore chromium plated with crutch or butter fly handle screwed down for iron pipe or brass ferrule and fixed complete all as specified and direcetd. |
| 61 | S&F in repair stop valve/angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed. |
| 62 | S&F in repair Vitreous China Urinal, Half Stall type (back or corner wall type) complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brakctes flush pipe grating and union for discharge pipe complete all as specified and directed. |
| 63 | S&F, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (minimum weight 60 gms) complete all as specified and direcetd. |
| 64 | S&F 450mm x 600mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer all as specified and directed. |
| 65 | S&F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified. |
| 66 | S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement all as specified and direceted. |
| 67 | Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store complete all as specified and directed. |
| 68 | S&F rotational moulded polethylene multilayared water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position triple layer in white colour all as pacific SSR Part- I, including metalic cover (GI basin as cover) complete all as specified and directed. |
| 69 | S&F rotational moulded polethylene water tank of 500 ltrs capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I |
| 70 | S&F 20 mm bore CPVC ball valve or gate valves, with CPVC/PTMT wheel head all as specified and directed. |
| 71 | S&F 20 mm bore float ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule all as specified and directed. |
| 72 | Taking up or down existing steel tubing and connections incl cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore all as specified and directed. |
| 73 | Taking up or down existing steel tubing and connections incl cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore all as specified and directed. |
| 74 | S&F 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 75 | S&F 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 76 | S&F reducing Tee/Elbow/Socket 20 x 16 mm dia with Female Brass Threaded Adaptor (FTA/FBTA) all as specified and directed. |
| 77 | Taking up or down existing PVC/CI/asbestos cement pressure pipe any class, (including all fitting) including disconnecting pipes 75/110 and fittings complete all as specified and directed. |
| 78 | S&F in repair 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints and solvent laid in trenches or in floors all as specified and directed. |
| 79 | S&F 75 mm bore PVC (SWR) bends and jointed with solvent all as specified and directed. |
| 80 | S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches and jointed with solvent all as specified and directed. |
| 81 | S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall and jointed with solvent all as specified and directed. |
| 82 | S&F of 110 mm PVC (SWR) bend any radius and jointed with solvent all as specified and directed. |
| 83 | S&F of 110mm bore PVC (SWR) junction single (single T) equal or unequal with access door all and jointed with solvent as specified and directed. |
| 84 | S&F PVC 75/100 mm dia pipe with wall, stack clamps out of 25mmx3mm flat iron for fixing including securing ends of stays to ball or roof all as specified and directed. |
| 85 | S&F of 110 mm PVC (SWR) vent cowl any radius and jointed with solvent all as specified and directed. |
| 86 | Demolition of brick work in build in mud mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles etc complete all as specified and directed. |
| 87 | M&L brick work with fly ash bricks (old size) straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 88 | M&L brick work with sub class 'B' Bricks (old size) straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 89 | M&L brick work with sub class 'B' Bricks straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and as directed. |
| 90 | M & L of providing precast cement concrete type B-1 1:2:4 as in window or door cills, lintels, quoin blocks, copings. kneelers, apex stones, pier caps, columns, posts, bed plates, pintle blocks, anchorage blocks, corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:4 with joints to match complete. |
| 91 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 92 | Mild steel bars 5 mm dia and over upto 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups, spacers and binders |
| 93 | M & L for PCC type B-1 1:2:4 as in coping, roof kerbs or mud stops, rounded or chamfered on edges including necessary form work complete. |
| 94 | Taking down of Aluminium door or window frame exc 1.5 Sqm but n.exc 4.0 Sqm (without taking off shutters from the frames) and refixing in the same opening complete all as specified and directed. |
| 95 | M&L for 16 to 18 mm thick Granite of any colour (table rubbed and polished) as in windows cill & cooking platforms and like fixed in cement mortar (1:6) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete. |
| 96 | M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies complete all as specified and directed. |
| 97 | S&F Formwork to soffits of suspended slabs such as roof slabs, roof beam floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) as specified and directed. |
| 98 | Taking down existing roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings, and heavy bracket framing (Beam, tee,channel, angle or flat sections ) incl distance pieces, cleats etc care fully and refixing the same as per direction with drilling, welding or with nut bolts complete all as specified. |
| 99 | Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete. |
| 100 | S & F exposed metal frame ceiling with 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm aluminium snap grid frame work of size 605 x 605mm as in ceiling as specified. The main and cross tees (15mm x 15mm x 1.5mm, weighing @ 0.12 Kg/Rm) shall be jointed at junction/crossings with anodized Al angle brackets. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized Al angle of size 40mm x 25mm x 2mm, weighing @ 0.36 Kg/Rm as indicated. Snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 4mm dia G.I. wire (upto 1200 mm in length) adjusting levels fixed to truss/purlin by ceiling cleats made of GI flat 40 x 3 mm size 60 mm long or J bolts with necessary bolts, nuts and washer complete. |
| 101 | Excavating in trenches not exc 1.5m deep & n exc 1.50 m wide for foundation etc and getting out in soft/loose soil complete all as specified and directed |
| 102 | Material & Labour for cement concrete type 1:3:6 (40 mm graded) as in surface channel and drain complete all as specified and directed. |
| 103 | M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 as in drain complete all as specified and as directed. |
| 104 | M&L mild steel steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 105 | M&L mild steel steel TMT bars 8mm dia as in spaces and binders and binding with and including mils steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 106 | M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finishing surfaces even and smooth/floating coat with using extra cement slurry complete all as specified and as directed. |
| 107 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, includingforms, moulds, mi- tred/stopped ends etc. |
| 108 | M & L of Reinforced concrete pipes 600 mm dia class NP 2 with one collar per length of pipe complete all as specified and as directed. |
| 109 | M&L for Returning, filling of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 110 | Removing excavated soil n. exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 111 | Taking down carefully of point wiring (Light , fan, socket or power) complete (fittings such as switches, Ceiling roses, pendants, regulator, sockets etc to be measured separately) removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed |
| 112 | Taking down carefully old unserviceable fittings & Fixers of any type and any size. |
| 113 | Taking down carefully old unserviceable by unscrewing from DB box, MCB SP/SPN/TPN of any size & any capacity . |
| 114 | Taking down carefully old unserviceable sub main wiring of any size . Please Enable Macros to View BoQ information |
| 115 | Taking down carefully old unserviceable sub main wiring of any size . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 05, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender