Tender For Plastering Pop Colouring Solar Panel With Inverter Battery To Ms Qaimoh.
Tender Value
4.88 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
3 days left
EMD
9760
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Plastering Pop Colouring Solar Panel With Inverter Battery To Ms Qaimoh.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kinds of soils, lead 01m from cutting edge. |
| 3 | providing and layimg of stone Soling duly hand packed including all carriages complete |
| 4 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl. carriage. |
| 5 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) incl. carriage. |
| 6 | Centring and shuttering incl. strutting, proping and removal of foam work complete, foundation. |
| 7 | Brick work with common burnt clay (selected bricks of class desig. 7.5 in exposed brick work incl. making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand) incl. curing & all carriages. |
| 8 | 12 mm thick cement plaster of mix 1:6 including curing etc. complete job. |
| 9 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600 x 600 mm. |
| 10 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90 litre/10sqm over an under coat of primer applied @ 0.75 litre/10sqm of approved brand and manufacture. |
| 11 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile OrganicCompound) content less than 50 grams/liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats. |
| 12 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 13 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90 litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture. |
| 14 | Providing and Fixing of 10 mm thick Ply board ceiling in class rooms including wooden supporting structure 2'' x 2'' size and making panels of standard size and wooden cornice with nails, necessary fixtures and scaffoldings. |
| 15 | Providing and fixing of wooden work in roofing, ceilings etc in the form of purlins in roof and joists in ceilings/ gables including hoisting, fixing in position of standard/approved size with nails and necessary fixtures complete job with (popular wood). |
| 16 | Providing and fixing galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating of approved make and brand including cutting and fixing with GI hooks, nuts, bolts and washers complete in all respects for covering of roof as per directions of EIC. |
| 17 | Providing and fixing coloured corrugated GI sheets 0.40 mm thick of approved make and shade including cutting to required size and fixing with GI hooks, nuts, bolts and washers complete in all respects for covering of roof, gable as per directions of EIC. |
| 18 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 |
| 19 | Providing glass panes 3.0 mm thick clerestory window shutters (Area of opening for glass panes excld portion inside shall be measured). |
| 20 | Engagement of Carpenter, Asst carpenters, Labours for demolishing/dismantling of old/existing ceilings, damaged roofings, Gables, soffits, eaves, including disposal of unserviceable and other materials outside the building. |
| 21 | Labours |
| 22 | Carpenters / Asst. Carpenters |
| 23 | Providing and fixing of electric fittings in all classrooms with channel fittings using 1.5 mm wire of approved brand for lighting, 2mm for fan points and 2.5 mm for heating points complete job. |
| 24 | lightning point |
| 25 | Fan points with fans |
| 26 | lightning point |
| 27 | Supplying and installing of Exide/Havells/Luminous Tubular inverter battery with provisions for roof top solar connection 150 AH complete job with all kinds of fixtures.And: Supplying and installing of sinewave Exide/Havells/Luminous Tubular inverter of 1500 watt capable of charging the two batteries with all kinds of fixtures complete job. |
| 28 | Inverter Battery 150 AH |
| 29 | Supplying and installing of sinewaveExide/Havells/Luminous Tubular inverter of 1500 watt capable of charging the two batteries with all kinds of fixtures complete job. |
| 30 | Inverter 1500 Watt |
| 31 | Supplying and installing of Exide/Havells/Luminous solar panels with all kinds of fixtures complete job [1 kWatt]. |
| 32 | Inverter Battery Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender