Tender For Special Repair/Replacement Of Old Unsv Tanks With Sheet Molding Compound (Smc) Thick Insulated Panel Tanks Along With Connected Items At Posts In Hill Sector At Bb Cantt, Srinagar.
Tender Value
49.97 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
5 days left
EMD
99950
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair/Replacement Of Old Unsv Tanks With Sheet Molding Compound (Smc) Thick Insulated Panel Tanks Along With Connected Items At Posts In Hill Sector At Bb Cantt, Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing of SMC/GRP panel tank for water storage as confirming with IS 14399: 1996 (Par I & II) and IS 4249:1967 for fire retardant and NSF UK tested required capacity of suitable size including fixing and assembling / erecting the tanks. Base Frame Grillage for tanks as per suitable for tank size and capacity. Made out from M.S. Channels / beams with anticorrosive paints / HDG coating, complete fixing and fabrication in the scope of suppler. The tanks to be leak proof after installation and having following specifications. Standard Insulated Grey colour SMC Panels Hot pressed moulded UV stabilized made from Sheet Moulding Compounds (SMC) composing of glass fibre and formulation. The SMC panel & accessories specification are as follows :- |
| 2 | SMC PANELS :-(i) Made by Hot Pressed Process moulded – 25mm PUF Insulated(ii) Bottom Panel SMC Panel - 1000 x 1000 x 70mm, Convex Shape(iv) Drain Panel & Outlet Panels SMC Panel - 1000 x 1000 x 70mm Special design for complete drain(v) Side Panel SMC Panel - 1000 x 1000 x 70mm, 1000 x 500 x 70mm(vi) Ceiling Panel SMC Panel - 1000 x 1000 x 70mm(vii) Manhole SMC Panel - 1000 x 1000 x 70mm with 700mm x 700mm locable lid.(viii) Thikness of the Panels As per IS 14399 (Part I & II) – Min 4mm to 10mm |
| 3 | SPECIAL ACCESSORIES :- (i) Corner Frame : HDG Steel Vertical Corner Angle at Four Corners(ii) Sealing Tape – Non Toxic : 3mm thick with high level of resistance to ageing and superior recovery from compression (Make : Norseal by Saint Gobain)(iii) Steel Bolts for Panel Joints : HDG Steel Nut-Bolts– M12 x 40mm – 8 nos. pe side.(iv) Air Vent - PVC : Air Vent dia 100mm with insect proof mesh in side.(v) Inlet/Outlet/Overflow/Drain : G.I. Flanages with 9” Long Nipple – 50NB each.(vi) External Reinforcement : ISI marked C channel at every 1-meter except in the corner of steel with anti-corrosive paint and it is tie with top external tie rods.(vii) Water Level Indicator : Transperent tube type with Alu. Body(viii) Internal Roof Supports : FRP Square Hollow section for Roof Supports – 50x50x5mm. (ix) Ladders : Exteranl ladder with wall mounting arrangement. Internal ladder FRP.(x) Connection fixing Inlet, Outlet, Overflow & Drain – 50NB (as per Table D - BS10) G.I. Flange type with 9” long thread end Nipple(xi) Base frame Grillage with Pedestal : Made out from M.S. Channels / beams with anticorresive paints. Please Enable Macros to View BoQ information |
| 4 | SPECIAL ACCESSORIES :- (i) Corner Frame : HDG Steel Vertical Corner Angle at Four Corners(ii) Sealing Tape – Non Toxic : 3mm thick with high level of resistance to ageing and superior recovery from compression (Make : Norseal by Saint Gobain)(iii) Steel Bolts for Panel Joints : HDG Steel Nut-Bolts– M12 x 40mm – 8 nos. pe side.(iv) Air Vent - PVC : Air Vent dia 100mm with insect proof mesh in side.(v) Inlet/Outlet/Overflow/Drain : G.I. Flanages with 9” Long Nipple – 50NB each.(vi) External Reinforcement : ISI marked C channel at every 1-meter except in the corner of steel with anti-corrosive paint and it is tie with top external tie rods.(vii) Water Level Indicator : Transperent tube type with Alu. Body(viii) Internal Roof Supports : FRP Square Hollow section for Roof Supports – 50x50x5mm. (ix) Ladders : Exteranl ladder with wall mounting arrangement. Internal ladder FRP.(x) Connection fixing Inlet, Outlet, Overflow & Drain – 50NB (as per Table D - BS10) G.I. Flange type with 9” long thread end Nipple(xi) Base frame Grillage with Pedestal : Made out from M.S. Channels / beams with anticorresive paints. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender