Tender For Replacement Of Led Light Fixtures At Dats Complex And Bijwasan, New Delhi.Sh-Phase-2
Tender Value
56.12 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
10 days left
EMD
1.12 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Led Light Fixtures At Dats Complex And Bijwasan, New Delhi.Sh-Phase-2
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Sep-2026 | Corrigendum - 1 | Other | 24-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply of LED recessed mounted circular shape Downlighter having wattage 18 - 20 Watt ,suitable to operate on 140 -270 Volts, 50 Hz supply housing should be Extruded aluminium/CRCA/standard alloy with efficient heat dissipation along with integrated inbuilt electronic driver having minimum driver efficiency ≥ 85%, output min. 100 lumen /watt, life of fixture (including driver ) ≥ 50,000 burning hours., CCT not less than 4000K, CRI ≥ 80, THD ≤10%, power factor ≥ 0.95 with minimum five(05) year OEM warranty complete with all accessories required as per site requirement.( Supply shall be made only after approval of sample installed at site by the EIC ) |
| 2 | Installation testing and commisioning of item no.1 complete in existing cut-out i/c making/finishing of existing cut-out (approx inner dia 155 mm)etc. required (including hanging chain if required) as per site requirement i/c dismantling of old light fixture along with deposition to store complete as required. |
| 3 | Supply of LED recessed mounted circular shape Dimmable Downlighter having wattage 18 - 20 Watt with suitable optics and sheilding to ensure minimum glare on ATC tower system display ), suitable to operate on 140 -270 Volts, 50 Hz supply housing should be Extruded aluminium/CRCA/standard alloy with efficient heat dissipation along with integrated inbuilt Dimable electronic driver having minimum driver efficiency ≥ 85%, output min.100 lumen /watt, life of fixture (including driver ) ≥ 50,000 burning hours., CCT not less than 4000K, CRI ≥ 80, THD ≤10%, power factor ≥ 0.95 with minimum five(05) year OEM warranty complete with all accessories required as per site requirement. ( Supply shall be made only after approval of sample installed at site by the EIC ) * Contoller ,key pad and dimable LED fixture must be from the Same OEM |
| 4 | Installation testing and commisioning of item no.3 complete in existing cut-out i/c making/finishing of existing cut-out etc(approx inner dia 193 mm). required (including hanging chain if required) as per site requirement i/c dismantling of old light fixture along with deposition to store and complete commisioning of controller for dimable light and along with the pad /switche complete as required. |
| 5 | Supply of DALI (latest Version) compatible dimmable luminaries controller ,suitable for controlling DALI LED luminaires through the existing wiring ,with minimum 3 independet DALI control channels supporting minimum 20 DALI control devices per channel (minimum total capacity 60 devices), integrated DALI bus power supply ,programmable control diagnostic indication, communication interface (RS-485/Ethernet or equivalent ),DIN-rail mounting ,suitable for operation on 140-270V AC ,50/60 Hz ,complete with all hardware accessories as per the site requirement ( Supply shall be made only after the approval of TDS by the EIC )* Contoller ,key pad and dimable LED fixture must be from the Same OEM |
| 6 | Supply of programmable wall mounted lighting control keypad with minimum 4/6 configurable push buttons, LED indication ,on/off and dimable luminaire controller through digital communication newtworks complete with mounting accessories as per the site requirement .( Supply shall be made only after the approval of TDS by the EIC )* Contoller ,key pad and dimable LED fixture must be from the Same OEM |
| 7 | Installation testing and commissioning of Item 5 and 6 with the dimable luminaire (item no.3) including addressing grouping of luminires,configuration of lighting groups, on /off and dimable funtions.The Agency shall submit detailed luminaire grouping drawings ,indicating controller-wise ,keypad-wise and group wise control logic .the system shall be commissioned only after the approval of grouping drawings by the EIC. |
| 8 | Supply of LED recessed mounted circular shape Downlighter having wattage 18 - 20 Watt ,suitable to operate on 140 -270 Volts, 50 Hz supply housing should be Extruded aluminium/CRCA/standard alloy with efficient heat dissipation along with integrated inbuilt electronic driver having minimum driver efficiency ≥ 85%, output min. 100 lumen /watt, life of fixture (including driver ) ≥ 50,000 burning hours., CCT not less than 4000K, CRI ≥ 80, THD ≤10%, power factor ≥ 0.95 ,with minimum five(05) year OEM warranty complete with all accessories required as per site requirement.( Supply shall be made only after approval of sample installed at site by the EIC ) |
| 9 | Installation testing and commisioning of item no.8 complete in existing cut-out i/c making/finishing of existing cut-out (approx inner dia 193 mm)etc. required (including hanging chain if required) as per site requirement i/c dismantling of old light fixture along with deposition to store complete as required. |
| 10 | Supply of LED surface mounted Downlighter having wattage18-20 Watt, suitable to operate on 140 -270 Volts, 50 Hz supply housing should be Extruded aluminium/CRCA/standard alloy with efficient heat dissipation along with integrated electronic driver having minimum driver efficiency ≥ 85%, output min. 100 lumen /watt, life of fixture (including driver ) ≥ 50,000 burning hours. ,CCT not less than 4000K, CRI ≥ 80, THD ≤10%, power factor ≥ 0.95 with minimum five(05) year OEM warranty complete with all accessories required as per site requirement. |
| 11 | Installation testing and commisioning of item no. 10 complete with all accessories required as per site requirement i/c dismantling of old light fixture along with deposition to store complete as required. |
| 12 | Supply of 45 watt LED street light fixture housing should be made of high pressure die cast aluminium/standard alloy luminaire with heat sink for outdoor application( IP ≥ 66) suitable to operate on 140 -270 Volt, 50 Hz supply with efficient heat dissipation along with integrated electronic driver having minimum driver efficiency ≥ 85%, output min. 110 lumens /watt, life of fixture (including driver)≥ 50,000 burning hours., CCT ≥ 6500K, CRI ≥ 70, THD ≤10%, power factor ≥ 0.95 with minimum five(05) year OEM warranty complete with all accessories required as per site requirement. |
| 13 | Installation testing and commisioning of item no. 12 complete with all accessories required as per site requirement i/c dismantling of old light fixture along with deposition to store complete as required. |
| 14 | Supply of 10-15 Watt LED bulkhead Light with suitable for wall mounting, opel diffuser, IP ≥ 66, IK ≥ 08,Diffuser should have UV Protection, suitable to operate on 140 -270 Volts, 50 Hz supply housing should be High pressure diecast aluminium/standard alloy with efficient heat dissipation along with integrated inbuilt electronic driver having minimum driver efficiency ≥ 85%, output min. 110 lumen /watt, life of fixture (including driver ) ≥ 50,000 burning hours., CCT not less than 4000K, CRI ≥ 70, THD ≤10%, power factor ≥ 0.95 ,with minimum five(05) year OEM warranty complete with all accessories required as per site requirement |
| 15 | Installation testing and commisioning of item no. 14 complete at the existing location i/c making/finishing etc. required as per site requirement i/c dismantling of old light fixture along with deposition to store complete as required. |
| 16 | Supply of LED wall parapet Light fitting of 3-5 wattage suitable to fixed in the existing boundy wall cutout, Diffuser should have UV Protection and suitable to operate on 140 -270 Volts, 50 Hz supply IP ≥ 66, IK ≥ 08 housing should be High pressure diecast aluminium/standard alloy with efficient heat dissipation along with integrated inbuilt electronic driver having minimum driver efficiency ≥ 85%, output min. 110 lumen /watt, life of fixture (including driver ) ≥ 50,000 burning hours., CCT not less than 4000(K), CRI ≥ 70, THD ≤10%, power factor ≥ 0.95 ,with minimum five(05) year OEM warranty complete with all accessories required as per site requirement |
| 17 | Installation testing and commisioning of item no.16 complete in existing cut-out i/c making/finishing of existing cut-out (approx.250mm x 270mm) etc. required(including minor civil work) as per site requirement i/c dismantling of old light fixture along with deposition to store complete as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender