Tender For Renovation Work Of Input Storage Shed At Bio Control Lab At Icar-Iisr, Kozhikode
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Sep 2026
9 days left
EMD
3100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikode → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Work Of Input Storage Shed At Bio Control Lab At Icar-Iisr, Kozhikode
BOQ
| Sl. No. | Item Description |
| 1 | Renovation work of input storage shed at Bio control lab at ICAR-IISR, Kozhikode |
| 2 | 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 3 | Providing and fixing 4mm thick ACP in panelling fixed in aluminium cupboard shutter and partition frame with C.P brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge |
| 4 | 21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.21.8.1 Upto 5mm depth and 5 mm width |
| 5 | Providing and fixing glass sliding window (60x45cm) , consisting of heavy-duty aluminium / stainless steel top track, rollers, bottom guide, end stoppers, and all necessary fixing accessories, complete with labour and materials as per manufacturer’s specifications and direction of Engineer-in-Charge. |
| 6 | Dismantling / Removing existing non-woven carpet mat (floor mat) including careful removal, scraping of adhesive, and cleaning of base surface for re-flooring, stacking of serviceable materials and disposal of unserviceable as directed by engineer in charge. |
| 7 | Providing and laying cement concrete topping over existing flooring after removing and scrapping and sand papering, ,1:2:4 mix , 25-40mm thick, finished smooth with floating coat of cement, complete |
| 8 | 11.37 Providing and laying vitrified floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 9 | 14.75 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 10 | 15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : 15.13.1 Of area 3 sq. metres and below |
| 11 | 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces (single door size 1.20x2.00m ) |
| 12 | 13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 13 | 13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :13.43.1 Water thinnable cement primer |
| 14 | 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 15 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:13.98.1 One or more coats on old work |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :13.99.1 One or more coats on old work |
| 17 | 15.38 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. |
| 18 | Providing and installing Renacon Rapid Wall (Fibre cement sheet: Lightweight Concrete Sandwich panels) as per IS 17908:2023 is fixed in the grooves by pressing two panel towards each other by L angles Frame Material 1.2 mm thick GI sheet Thickness 1.2 mm Material Manufacturer sail-confirming IS 277 having Dimensions 75 mm x 75 mm x 1.6 mm and Fixing method & Application Using cutting, bending, MIG welding by Fixing Ceiling and Floor Channels , Erect the panel and align , Apply jointing material in tongue and groove joint, Apply jointing material and fibre mesh tape to the surface joint . complete |
| 19 | 26.57 After erection of GFRP wall panels, seal all GFRP wall joints with paper tape temporarily. Water proofing treatment of vertical joints with Zycosil/ equivalent water proofing Solution (1 litre of Zycosil/equivalent & 20 litres of water stirred first & 2 litres of Zycoprime/equivalent added and stirred (total 23 litres)) with 50 ml syringe till the gap and in filled concrete is completely saturated. After removing the paper seal, seal off the vertical joints with water proofing material \\"Grout RW/equivalent \\" |
| 20 | Supplying and fixing GI fabric mesh window including GI wire mesh (standard woven or 14 gauge ), MS angle/flat frame (size as required), cutting mesh to size, fixing with GI screws/fasteners, applying one coat of red oxide primer to steel frame, installing the frame on Renacon wall using suitable anchor fasteners/rawl plugs, making good the gap with polymer-modified mortar, and finishing the joint smooth, complete as per direction of Engineer-in-charge. |
| 21 | 20 W LED tube |
| 22 | 6‑module metal box & plate |
| 23 | BLDC wall fan |
| 24 | 4‑module metal box & plate |
| 25 | 6A socket |
| 26 | 16A socket |
| 27 | 16A switch |
| 28 | 6A switch |
| 29 | 1.5 mm² wire 2×30 m (60 m) |
| 30 | Ivory PVC pipe, clamps & screws (1.5 mm² run) |
| 31 | 2.5 mm² wire 3×20 m |
| 32 | 20 mm ivory pipe, clamps & screws (2.5 mm² run) |
| 33 | Exhaust fan 150 mm – 1 no |
| 34 | Labour (Skilled installation and testing Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender