Housing Urban and Rular Development Government Departments Closing in 4 days TDR #57323723

Tender For Balance Work Of Construction of New School Building I.E. Library & Examination Hall In repair of Ggsss Pal Ur Distt. Kangra (Hp) (Sh:- Brick Work, Plastering Work (Inerior & Exterior), providing and laying Tile Work & Granite Work In G.F E

Issued by Government Departments · Kangra, Himachal Pradesh
Tender Value
27.05 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
4 days left
EMD
54100
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Balance Work Of Construction of New School Building I.E. Library & Examination Hall In repair of Ggsss Pal Ur Distt. Kangra (Hp) (Sh:- Brick Work, Plastering Work (Inerior & Exterior), providing and laying Tile Work & Granite Work In G.F Etc. (Deposit Work)

BOQ

Name of Work:- Balance work of C/O New School Building i.e. Library & Examination Hall in r/o GGSSS Pal ur Distt. Kangra (HP) (SH:- Brick work, Plastering work (Inerior & Exterior), P/L Tile work & Granite work in G.F etc. (Deposit work)
Sl. No. Item Description
1Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etcetra including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
2Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths in all floor including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
3Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
4Providing and laying cement concrete grade M-25 (M-Twenty five) design mix with minimum compressive strength 25N/mm2 ( twenty five newton per millimetre square )with cement contents not less than 360 Kg (Three hundred sixty kilogram) per Cubic metre mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding the cost of form work and reinforcement for reinforcement cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto any floor level including carriage of materials with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
5Providing and laying cement concrete grade M-25 (M-Twenty five) design mix with minimum compressive strength 25N/mm2 ( twenty five newton per millimetre square )with cement contents not less than 360 Kg (Three hundred sixty kilogram) per Cubic metre mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design including cost of form work but excluding cost of reinforcement for reinforced concrete work in moulding as in cornies, window sills etcetra not exceeding 15cm in girth upto all floor levels including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
6Providing and laying tor steel of TataTISCO, SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
7Second class brick work using common burnt clay building F.P.S. (non modular) bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor levels as per PWD specification, drawing and design and curing complete including scaffolding and cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
8Second class half brick work using common burnt clay building F.P.S. (non modular) bricks with hoop iron in cement mortar 1:4 (one cement isto four sand) in super structure as per PWD specification, drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
9Providing and laying 25mm (Twenty five millimetre) thick Cheema Pink granite in flooring & skirting in combination with black granite border laid over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing moulding and nousing complete as per approved specification, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
10Providing and laying 600x600 mm (Six hundred into six hundred millimetre) vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero decimal zero eight percent) and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One cement isto four coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ sqm (Three decimal three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
11Providing and laying 600x600 mm (Six hundred into six hundred millimetre) vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero decimal zero eight percent) and conforming to IS:15622, of approved make, in skirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto three coarse sand), jointing with grey cement slurry at the rate 3.3 kg/ sqm (Three decimal three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
126mm (six millimetre) cement plaster 1:3 (one cement isto three sand) in ceiling and curing complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
1315mm (Fifteen millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (eighty millimetre) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete as per PWD specification including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
1415mm (Fifteen millimetre) ) thick cement plaster on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (eighty millimetre) in girth, with cement mortar 1:4 (one cement isto four sand) including curing as per PWD specification and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
1515mm (Fifteen millimetre) ) thick cement plaster on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (eighty millimetre) in girth, with cement mortar 1:5 (one cement isto five sand) including curing as per PWD specification and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.
16Providing 20 mm (Twenty millimetre) thick pattern in plaster in cement mortar 1:5 ( one cement isto five sand ) as per drawing, design and specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57323723
AUTHORITY Government Departments
TENDER VALUE 27.05 Lakhs
LAST DATE 08-09-2026
Authority
Authority Name Public Works Department
Work Description Tender for Balance Work Of Construction of New School Building I.E. Library & Examination Hall In repair of Ggsss Pal Ur Distt. Kangra (Hp) (Sh:- Brick Work, Plastering Work (Inerior & Exterior), providing and laying Tile Work & Granite Work In G.F Etc. (Deposit Work)
Basic Detail
Tender No EE PLP NIT No. 7981-8031 dated 27.08.2026
Bidding Type Tender
Location
City Kangra
State Himachal Pradesh
Key Dates
Publish Date 03 Sep 2026
Submission Date 08 Sep 2026
Open Date 08 Sep 2026
Finance
Tender Value 27.05 Lakhs
Tender Fee 2000
EMD 54100
Exemption Available
Document List
410d1a7f-37e9-4a12-957f-5b874a6515d5.html
BOQ_211696.xls
SBD.pdf
Tendernotice_1 (14).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Sep 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

410d1a7f-37e9-4a12-957f-5b874a6515d5.html

xls

BOQ_211696.xls

pdf

SBD.pdf

pdf

Tendernotice_1 (14).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders