Tender For Construction Of Museum At Kamru Kila In Tehsil Sangla District Kinnaur (H.P) (Sub Head:- Construction Of Building Portion Including W.S. & S.I.). Estimated Cost:-₹ 48,29,994/- Earnest Money:-₹ 96,600/- Time:- Twelve Months.
Tender Value
48.29 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
1 days left
EMD
96600
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Museum At Kamru Kila In Tehsil Sangla District Kinnaur (H.P) (Sub Head:- Construction Of Building Portion Including W.S. & S.I.). Estimated Cost:-₹ 48,29,994/- Earnest Money:-₹ 96,600/- Time:- Twelve Months.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches in earth work in all height and depths in all kinds of soil, including saturated soils comparising of pick work, jumper work, blasting work both in soft and hard rock with chiselling and wedging out of rock ( where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site., according to the HP.PWD specification of 1990 (One thousand nine hundred ninety) volume-I (One) and sorting out useful and unuseful material and transportation of the unuseful material for disposing off to dumping site (to be arranged by the contractor) as per satisfaction of Engineer-in-charge through all modes of transporation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineris, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor which shall have to be duly compensated by him in all respects including all incidental charges. |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in pedestial and pedestial foundation, footings bases of columns etcetera and mass concrete including carriage of materials within all leads and lifts and other incidentals complete in all respect as per direction of Engineer in Charge. |
| 4 | Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beam, cantilever, girders and lintels, sides and soffits of beams beams haunching below supporting cantilevers girders bressumers and lintels of any depth including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 5 | Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square, rectangular, polygonal in plan including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 6 | Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surface such as soffits of suspended floors, roofs, landings and the like upto any thickness including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 7 | Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls of any width including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 8 | Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded/crushed/crushed stone aggregate 40mm (Forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 9 | Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footings bases of coloumns and the like and mass concrete including carriage of material within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 10 | Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girder bressumers and cantilever upto all floor level including carriage of material within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 11 | Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars. posts and struts etcetra upto all floor level including carriage of material within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 12 | .Providing Tor steel reinforcement for R.C.C.work including bending,binding and placing in position complete upto in super structrue for all floors in all heights including carriage of material through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of the Engineer-in-charge. |
| 13 | Providing and laying brick work using common burnt clay building bricks in super structure for all floors in all heights using second class bricks in cement mortar 1:6 (One cement isto six sand) and curing complete including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge |
| 14 | Providing and laying 30cm. (thirty centimetre) thick composit stone masonry with stone facing of chisel dressed stones one line dressed in cement mortar 1:6 (One cement isto six sand) and concrete backing with cement concrete 1:3:6 (One cement isto three sand isto six crushed stone aggregate 20mm.(twenty milimetre) nominal size) on inner face of walls including centring, shuttering, curring and propping complete for all floor including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per the entire satisfaction and direction of the Engineer-in-charge. |
| 15 | Boulder filling of selected hard dry stone hand packed tightly in ground floor and filling the interstices with spalls etcetra as per the direction of Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 16 | Providing first class deodar wood work in frames of doors, windows, clere story windows and other frames wrought framed and fixed in position including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 17 | Providing and fixing 40mm (forty millimeter) thick first class deodar wood panelled glazed or panelled and glazed shutter for doors, windows and clere story windows including black enamelled iron butt hinges with necessary screws and 5 mm thic glass including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 18 | Providing and fixing 40mm (forty millimeter) thick first class deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85g (Eighty five) gauge with wire of diameter 0.56mm (zero point five six millimeter) for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of material with in all leads, lifts and other incidental charges complete in all respect.all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 19 | Providing and fixing 19mm HDMR (nineteen millimetre) thick Commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc. complete for all floors including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge. |
| 20 | Providing and fixing cubboard made with 19 mm HDMR.(Nineteen milimetre) thick water proof resistant commercial board as a complete box including shelves, shutters and vertical portions. including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts as per direction of the Engineer-in-charge. |
| 21 | Providing and fixing back side of cup board box shall have 6mm thick water proof ply all cut portions of board shall be finished with 6/20mm thick hard(HDMR) wood edging as per detail. The shutter shall be finished with 1mm thick lamination (from out side) including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts as per direction of the Engineer-in-charge. |
| 22 | Providing first class deodar wood work in trusses, purlins, rafters, posts, post plates, wall plates and the like wrought framed hoisted and fixing in position including carriage of materials within all leads and lifts complete in all respect as per PWD specification and as per the direction of Engineer-in-charge. |
| 23 | Providing first class deodar wood runner 5 x 15 cm in size and the like wrought framed hoisted and fixing in position including carriage of materials within all leads and lifts complete in all respect, and lifts as per direction of the Engineer-in-charge. |
| 24 | Providing and fixing of wooden truss in deodar wood 30 cm wide eaves board 100mm x25mm. thick including fixing in position in 1st class deodar wood including carriage of materials within all leads and lifts complete in all respect as per PWD specification and as per the direction of Engineer-in-charge. |
| 25 | Providing and fixing slate roofing of 40cm x 20 cm (forty into twenty centimetre) size with 7.5 cm (seven point five centimetre) lap double layer fixed on wooden battens (wood work to be paid for seperately) complete in all respect including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 26 | Providing wood work in trusses, purlins, rafters, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position in hard wood complete in all respect including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 27 | Providing and fixing Tar Shield Membrane beneath slate roofing over timber battens/wooden roof framework, including surface preparation, overlapping of membrane joints, fixing with approved fasteners, sealing of joints wherever required, all labour, tools and plants, scaffolding, carriage of materials within the work site, and all incidental charges complete in all respects, as per the manufacturer's specifications and as directed by the Engineer-in-Charge. The rate includes GST, royalty, and all other statutory taxes, duties, levies, and incidental charges as applicable under Government of Himachal Pradesh |
| 28 | Providing and fixing 19mm thick HDMR Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) in all respects, as per the manufacturer's specifications and as directed by the Engineer-in-Charge. The rate includes GST, royalty, and all other statutory taxes, duties, levies, and incidental charges as applicable under Government of Himachal Pradesh |
| 29 | 25 mm cement concrete flooring 1:2:4 (1 cement: 2 sand :4 stone aggregate of size 12.5 mm and below) laid over base concrete and finished with a floating coat of neat cement (base concrete to be paid saparately). including curring carriage of material by all modes of transportation within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge. |
| 30 | Providing and laying H.D.F. flooring action tessa 10mm thick (AC -4 Sheet) with layer of foam over floor and fixing/jointing complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge |
| 31 | Providing and laying 20 Cms (twenty centimetre) thick flagged stone flooring laid in cement mortar 1:5 (one cement isto five sand) and curing complete including carriage of material within all leads and lifts and other incedental charges complete in all respects as per direction of Engineer in Charge. |
| 32 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 33 | White glazed tiles 6mm (six millimetre) thick in skirting riser of steps and dado 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry complete upto all floor level in all respect including carriage of materials within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge. |
| 34 | 15mm (fifteen millimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 35 | Applying Birla White wall care putty over plaster surface after throughly brushing the suface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the suface including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 36 | 6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement : three sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 37 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for making the surface including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 38 | Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction of Engineer in Charge. |
| 39 | Providing and fixing 12 mm thick wooden plank ceiling with planks over lapping each other and jointed with wood screws (frame work to be paid for separately) in 1st class rai wood including carriage of materials within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge. |
| 40 | P/F deodar ceiling 12 mm thick over wooden frame 5x5 cm in false ceiling of the musem with planks over lapping each other and jointed with wood screws (frame work to be paid for separately) in 1st class deodar wood including carriage of materials within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge. |
| 41 | Providing and fixing 12 mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) including carriage of materials within all leads and lifts as per PWD specification and as per the direction of Engineer-in-charge. |
| 42 | Providing and fixing 300x16mm (Three hundred into sixteen millimeter) anodized heavy duty aluminum sliding door bolt anodized transparent or died to required colour and shade with bolts and nuts screws etcetra as approved by the Engineer-In-Charge complete including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 43 | Providing and fixing 250x16mm (Two hundred fifty into sixteen millimeter) anodized heavy duty aluminum sliding door bolt anodized transparent or died to required colour and shade with bolts and nuts screws etcetra as approved by the Engineer-In-Charge complete including carriage of materials within all leads and lifts complete in all respect. |
| 44 | Providing and fixing 300x10mm (three hundred into ten millimetre) heavy duty aluminum tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect. |
| 45 | Providing and fixing 250 x10mm (two hundred fifty into ten millimeter) heavy duty aluminum tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect. |
| 46 | Providing and fixing 150 x10mm (one hundred fifty into ten millimeter) heavy duty aluminum tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect. |
| 47 | Providing and fixing 150mm (One hundred fifty millimetre) mat finish aluminum heavy duty handles anodized transparent or dyed to required shade and colour with necessary screws etcetra as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect. |
| 48 | Providing and fixing 150mm (One hundred fifty millimetre) bright finished hard drawn hooks and eyes anodized transparent or dyed to required shade and colour with necessary screws etcetra as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect. |
| 49 | Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect. |
| 50 | Providing and fixing 100 mm (One hundred millimetre) mat finish aluminum heavy duty handles anodized transparent or dyed to required shade and colour with necessary screws etcetra as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect. |
| 51 | Providing and fixing Angle Indian Universal vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 52 | Providing and fixing flat back 550x400mm (five hundred fifty into four hundred millimeter) vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings complete in all respect including carriage of materials within all leads and liftscomplete in all respect as per direction of Engineer in Charge. |
| 53 | Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge |
| 54 | Providing and fixing 15mm dia. C.P. brass pillar tap with capstan head of JAL/ESS ESS as per HPPWD specification of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 55 | Providing and fixing 15mm (fifteen millimetre) diametre C.P.brass bib tap superior or heavy type including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 56 | Providing and fixing PTMT angle cock of approved quality and colour 15 mm with flange including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 57 | Providing and fixing CP Connection pipe with brass unions 45cm (forty five centimetre) length 15mm (fifteen millimetre) diametre including carriage of materials within all leads, lifts and other incidental charges complete in all respect as per direction of Engineer in Charge. |
| 58 | Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) bavelled edge mirror of superior glass mounted on 6mm (six millimetre) thick AC sheet or ply wood sheet and fixed to wooden plugs with CP brass screws and washers complete in all respect including carriage of materials within all leads and lifts.and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 59 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 60 | Providing and fixing 8 mm (Eight milimeter) dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 61 | Providing and fixing 600x120x5 mm (Six hundred into one hundred twenty into five milimeter) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 62 | Providing and fixing 1216 mm dia(16 mm O.D. pipe) Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall.in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 63 | Providing and fixing 110 mm dia high pressure PVC spigot and socket, waste and ventilating pipes 4.00 to 4.6mm thick (Four point zero zeo to four point six millimetre) of Finolex/Vectus/Relience including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 64 | Providing and fixing 75 mm dia high pressure PVC spigot and socket, waste and ventilating pipes 4.00 to 4.6mm thick (Four point zero zeo to four point six millimetre) of Finolex/Vectus/Relience including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 65 | Providing and fixing 110 x 90 mm (One hundred ten into ninty milimeter) PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 66 | Providing and fixing PVC Plain bend 110mm (one ten millimetre) diametres ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge |
| 67 | Providing and fixing PVC Plain bend 75mm (Seventy five millimetre) diametres ISI marked including fixing with approved adhesive etcetra complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification and as per direction of Engineer-in-Charge |
| 68 | Providing steel work of TATA, Sail or RASHTRIYA ISPAT welded in built up sections/ hollow section truesses and framed work, including cutting hoisting and fixing in position and applying a priming coat of red lead paintIn gratings framed guard bars,ladders,railling,brackets and similar works. and as per HPPWD specifications of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 69 | Providing and fixing M.S. plain grills of required pattern and design in iron frames of windows etcetra with flats square or round bars with round headed bolts and nuts or by screws complete in all respect including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge. |
| 70 | Polishing two coat with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and includng a coat of wood filler including carriage of materials within all leads and lifts complete in all respect and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 71 | Providing and executing decorative hand carving on seasoned Deodar wood of approved design and pattern, including marking, carving, finishing and fixing in position with all tools & plants, scaffolding wherever required, and complete in all respects as directed by the Engineer-in-Charge |
| 72 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in- charge (Door handle, lock and stopper etc.to be paid separately). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender