Tender For Construction Of Pwd (Dws) Sub-Division Office At Dharmanagar North Tripura During The Year 2026-27/ Sh:- Construction Of Ground Floor Including Internal Water Supply & Sanitation Installation.(Balance Work)
Tender Value
96.82 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
10 days left
EMD
1.93 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Pwd (Dws) Sub-Division Office At Dharmanagar North Tripura During The Year 2026-27/ Sh:- Construction Of Ground Floor Including Internal Water Supply & Sanitation Installation.(Balance Work)
BOQ
| Sl. No. | Item Description |
| 1 | A)Sub Head : Site development in/c all allied works Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 3 | B)Sub Head : Earth work & Demolishing work.Demolishing reinforced cement concrete manually / by mechanical means including stacking of steel bars properly and disposal of unserviceable material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge. |
| 4 | Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge:- In cement mortar. |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil |
| 6 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 7 | C) Sub Head : Concrete Work.Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - '-All work upto plinth level:1:4:8 ( 1 Cement: 4 fine sand : 8 graded stoneaggregate 40 mm nominal size) |
| 8 | D) Sub Head : RCC Work.Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Centering shuttering including struttings, propping etc. and removal of form work for:Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply |
| 11 | Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply |
| 12 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 13 | Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 14 | Stairs (excluding landings) except spiral staircases with wooden plank |
| 15 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 16 | E) Sub Head : Brick Work.First class brick work in foundation and plinthincluding cost of all materials as required complete:In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 17 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-In cement mortar 1:4 (1 cement :4 fine sand). |
| 18 | F)Sub Head : Wood & PVC Work.Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :Local Teak wood |
| 19 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.35 mm thick including ISI marked Stainless Steelbutt hinges with necessary screws. |
| 20 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers' specification and direction of Engineer-In-Charge. |
| 21 | Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised /plastic brackets of size 75×220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserying galvanised MS tube of size 20×20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of \\"H\\" Section, a UPVC hollow section of size 100×24 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic /galvanised MS \\"U\\" cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontaly 6 mm galvanised MS rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter). |
| 22 | Providing and fixing aluminium tower bolts ISImarked anodised (anodic coating not less thangrade AC 10 as per IS : 1868 ) transparent ordyed to required colour or shade with necessaryscrews etc. complete :300 x 10 mm |
| 23 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300 x 16 mm |
| 24 | Providing and fixing aluminium handles ISI markedanodised (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed torequired colour or shade with necessary screwsetc. complete :125 mm |
| 25 | Providing and fixing IS : 3564 marked Aluminiumdie cast body tubular type universal hydraulic doorcloser with necessary accessories and screws etc.complete. |
| 26 | G) Sub Head : Steel Work.Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing and paneling and dash fasteners to be paid for separately) :- |
| 27 | (i) For fixed portion of approved quality:-- Anodised aluminium (anodised transparent ordyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15). |
| 28 | (ii) For shutters of doors, windows & ventilatorsincluding providing and fixing hinges / pivots andmaking provision for fixing fittings whereverrequired including the cost of EPDM rubber /neoprene gasket required ( Fittings shall be paidfor separately ):-- Anodised aluminium (anodised transparent ordyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15). |
| 29 | Providing and fixing fan clamp type-I of 16 mmdia M.S. bar bent to shape with hooked ends inR.C.C. slabs during laying including painting theexposed portion of loop, all as per standard designcomplete. |
| 30 | Providing and fixing in position collapsible steelshutters with vertical channels 20x10x2mm at 100mm centre to centre and braced with flat irondiagonals 20x5mm size with top and bottom rail ofT-iron 40x40x6mm with 40mm dia. steel pulleys &with riveted bolts, nuts, locking arrangement,stoppers, handles, hold fast /anchor bolt includingembedding in cement concrete of required gradefor fixing in position, all necessary fittings,including applying a priming coat of approved steelprimer etc. complete as required. |
| 31 | Providing and fixing glazing of approved quality inaluminium doors, windows, ventilator, shuttersand partition etc. with EPDM rubber / neoprenegasket etc. complete as per architectural drawingand the direction of Engineer-in-charge (Cost ofsnap beading shall be paid in basic item) :-With float glass panes of 4.0 mm thickness (weight not less than 10.0 kg / sqm ) |
| 32 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. i) Fixed to steel windows by welding. |
| 33 | H) Sub Head : Flooring Work.Providing and laying 1st class quality vitrified floortiles in different sizes (thickness to be specified bythe manufacturer) with water absorption less than0.08% and conforming to IS: 15622 -2017, ofapproved make,in all colours and shades, laidover 20mm thick cement mortar 1:4 (1 cement : 4fine sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with whitecement and matching pigments etcall complete asper direction of the Engineer-in-charge..(ii) Glassed vitrified tiles (Mat Finih /Anti Skid)- Size of tile 1200 mm x 600 mm |
| 34 | Providing and fixing Precast chequered cementconcrete tiles 18 mm thick, laid in footpath &courtyard, on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 fine sand ) jointed with neatcement slurry including rubbing and cleaning etc.all complete as per direction of Engineer-incharge.In dark shade using ordinary cement |
| 35 | I) Sub Head : Roofing & Celling Work.Providing and fixing on wall face unplasticisedRigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS : 13592 Type Aincluding jointing with seal ring conforming toIS : 5382 leaving 10 mm gap for thermalexpansion:Single socketed pipe - 110 mm OD |
| 36 | Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: |
| 37 | (i) Coupler- 110mm |
| 38 | (ii) Single equal tee with door- 110 x 110 x 110 mm |
| 39 | (iii) Single equal tee without door- 110 x 110 x 110 mm |
| 40 | (iv) Bend 87.5 degree- 110mm |
| 41 | (v) Plain shoe- 110 mm |
| 42 | Providing and fixing unplasticised -PVC pipe clipsof approved design to unplasticised - PVC rainwater pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws ofrequired length including cutting brick work andfixing with cement mortar 1 : 4 (1cement : 4 finesand) making good the wall etc. complete.110mm |
| 43 | Providing and fixing to the inlet mouth of rain waterpipe PTMT grating with thickness of 8mm andweighing not less than 100gm. complete.110mm |
| 44 | J) Sub Head : Finishing Work.12 mm cement plaster of mixIn cement mortar 1 : 6 ( 1 cement : 6 fine sand ) |
| 45 | 15 mm cement plaster on the rough side of single or half brick wall of mix :In cement mortar 1 : 6 ( 1 cement : 6 fine sand ) |
| 46 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by theManufacturer] :New work ( two or more coats) over and includingwater thinnable priming coat with cement primer. |
| 47 | Finishing walls with premium acrylic smoothexterior paint with Silicon additives of requiredshade of approved brand and manufacture[Payment shall be made after submission of TestCertificate issued by the Manufacturer] :New work ( two or more coats applied @ 1.43litre/10 sqm over and including priming coat ofexterior primer applied @ 2.20 kg/10 sqm) |
| 48 | Applying priming coat [Payment shall be madeafter submission of Test Certificate issued by theManufacturer] : |
| 49 | With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 50 | With ready mixed red oxide zinc chromate primerof approved brand and manufacture on steelgalvanised iron/ steel works |
| 51 | Painting with synthetic enamel paint of approvedbrand and manufacture to give an even shade[Payment shall be made after submission of TestCertificate issued by the Manufacturer]:Two or more coats on new work |
| 52 | K) Sub Head : Sanitary Installation.Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orrisa pattern W.C. pan ofsize 580x440 mm with integral type foot rests. |
| 53 | Providing and fixing white vitreous chinapedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern with manually controlleddevice (handle lever), conforming to IS : 7231,with all fittings and fixtures complete includingcutting and making good the walls and floorswherever required :107.01 W.C. pan with ISI marked white solid plastic seat and lid |
| 54 | Providing and Fixing white vitreous china flatback or wall corner type lipped front urinalbasin of 430x260x350mm and 340x410x265mmsizes respectively with automatic flushing cisternwith standard flush pipe and C.P. brassspreaders with brass unions and G.I clampscomplete, including painting of fittings andbrackets, cutting and making good the walls andfloors wherever required :Range of four urinal basins with 10 litre whiteP.V.C. automatic flushing cistern. |
| 55 | Providing and fixing white vitreous china squattingplate urinal with integral rim longitudinal flush pipe. |
| 56 | Providing and fixing 600x450 mm bevelled edgemirror of superior glass (of approved quality)complete with 6 mm thick hard board ground fixedto wooden cleats with C.P. brass screws andwashers complete. |
| 57 | Providing and fixing white vitreous china washbasin including making all connections butexcluding the cost of fittings:Flat back wash basin of size 550x400mm. |
| 58 | Providing and fixing 600x120x5mm glass shelfwith edges round of supported on anodisedaluminium angle frame with C.P. brass bracketsand guard rail complete fixed with 40 mm longscrews, rawl plugs etc., complete. |
| 59 | Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brassscrews with concealed fitting arrangement ofapproved quality and colour.450mm long towel rail with total length of 495mm,78mm wide and effective height of 88mm,weighing not less than 170gms. |
| 60 | Providing and fixing PTMT liquid soap container109mm wide, 125mm high and 112mm distancefrom wall of standard shape with bracket of thesame materials with snap fittings of approvedquality and colours weighing not less than 105gms. |
| 61 | Providing and fixing PTMT soap Dish Holderhaving length of 138mm, breadth 102mm, heightof 75mm with concealed fitting arrangementsweighing not less than 106 gms. |
| 62 | Providing and fixing on wall face unplasticisedRigid PVC , soil, waste & vent pipes (workingpressure 6 kg / cm2) conforming to IS : 13592Type A including jointing with seal ringconforming to IS : 5382 leaving 10 mm gapfor thermal expansion:Single socketed pipe - 110 mm OD |
| 63 | K) Sub Head : water supply Installation.Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot &cold water supply including all CPVC plain & brassthreaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solventcement and testing of joints complete as perdirection of Engineer in Charge.- Internal work - Exposed on wall |
| 64 | 15 mm nominal outer dia .Pipes. |
| 65 | 20 mm nominal outer dia .Pipes. |
| 66 | 25 mm nominal outer dia .Pipes. |
| 67 | 40 mm nominal outer dia .Pipes. |
| 68 | Providing and fixing brass bib cock of approvedquality :15 mm nominal bore |
| 69 | Providing and fixing brass stop cock of approvedquality :15 mm dia nominal bore |
| 70 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end): |
| 71 | 25 mm nominal bore |
| 72 | 40 mm nominal bore |
| 73 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender