Tender For Work Of Providing Of 08 Nos. Of 70W Led Streetlight Fixtures By Providing Octagonal Pole Along With Underground Cabling Along The Main Road To End Point Road At Kabristan Pontemol Curchorem Under The Jurisdiction Of Electrical Sd-I,Div Vii
Tender Value
8.27 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
8 days left
EMD
16546
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Providing Of 08 Nos. Of 70W Led Streetlight Fixtures By Providing Octagonal Pole Along With Underground Cabling Along The Main Road To End Point Road At Kabristan Pontemol Curchorem Under The Jurisdiction Of Electrical Sd-I,Div Vii, Curchorem
BOQ
| Sl. No. | Item Description |
| 1 | Material Cost (Materials which are shown under erection & which are not shown under material will be supplied departmentally. |
| 2 | Supply of 4 Core 16sq.mm , XLPE Armoured cable, 1.1KV Grade power cable and carrying ISI MARK & of approved make. Supply of cable as per the Specification mentioned in the NIT. |
| 3 | Supply of PVC Insulated, multistanded copper cable of size 3-core x 2.5sq. mm from juction box to fixture including termination of cable with lugs for LED fixtures. The cable shall carry concerned ISI mark & approved make. Supply of cable as per the Specification mentioned in the NIT. |
| 4 | Supply of Cable route Markers (for entire 11 KV & LT cable route length ) as per NIT drawing. |
| 5 | Supply and laying of fine river sand of approved quality for cushioning of LT underground cables laid by conventional Open Trenching Method. |
| 6 | Supply of PCC precast cable Protective cover of size 480mm length x 250mm width x 50mm thick casted by confined mold vibratory cast of concrete mix M30, having strength of 30N/mm2 at 28 days .Supply and laying as per the Specification mentioned in the NIT. |
| 7 | Supply of G.I. earthing pipe, 2500mm long, 40mm nominal dia, class B, perforated for 1)Streetlight Poles. The pit shall be filled with homogenous mixture of 20Kgs of Charcoal, 20Kgs of salt and sand /soil with Brick masonary Chambers. The work includes excavation, backfilling & spreading of excavated surplace earth evenly. Supply of the earthing pipe as per the Specification mentioned in the NIT. |
| 8 | Supply of HDGI flat of size 25mm x 5mm for earthing of 1)Streetlight Poles. Supply of cable as per the Specification mentioned in the NIT. |
| 9 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size for foundations of 1)Streetlight poles. Concreting as per the specification mentioned in the NIT |
| 10 | Providing of Centering and shuttering including struttings, propping etc. and removal of formwork for a) Foundations, footings, bases of columns and mass concrete for 1) Streetlight poles. Centering and shuttering as per the specification mentioned in the NIT |
| 11 | Supply of 8 Mtrs Octagonal Pappeared H.D.G.I pole made out of 4m.m. thick plate and heavy provision for cable entry, having weight not less than 97kg. 4 Nos of J type M20x 750mm long foundation bolts of grade EN 8. Supply as per the specification mentioned in the NIT |
| 12 | Erection, Laying, Testing, commisioning of 4 Core 16sq.mm , XLPE Armoured cable, 1.1KV Grade power cable and carrying ISI MARK & of approved make. Erection, Laying, Testing, commisioning of cable as per the Specification mentioned in the NIT. |
| 13 | Erection, Laying, Testing, commisioning of PVC Insulated, multistanded copper cable of size 3-core x 2.5sq. mm from juction box to fixture including termination of cable with lugs for LED fixtures. The cable shall carry concerned ISI mark & approved make. Erection, Laying, Testing, commisioning of cable as per the Specification mentioned in the NIT. |
| 14 | Erection of Cable route Markers (for entire 11 KV & LT cable route length ) as per NIT drawing. |
| 15 | Excavation in any type of soil including hard laterite soil by mechanical means( hydraulic excavator)/manual means for laying of LT cables of various sizes , including getting out the excavated soil and disposal of surplus excavated soil. |
| 16 | Refilling of excavated soil in the foundations, trenches etc. with avialable excavated earth in layers not exceeding 20 cm depth, cosolidating each layer by ramming and watering lead upto 50 M and all lifts and disposal of surplus earth in cable trenches and foundations of equipments. |
| 17 | Laying of PCC precast cable Protective cover of size 480mm length x 250mm width x 50mm thick casted by confined mold vibratory cast of concrete mix M30, having strength of 30N/mm2 at 28 days . |
| 18 | Erection, Testing, commisioning of G.I. earthing pipe, 2500mm long, 40mm nominal dia, class B, perforated for 1)Streetlight Poles. The pit shall be filled with homogenous mixture of 20Kgs of Charcoal, 20Kgs of salt and sand /soil with Brick masonary Chambers. The work includes excavation, backfilling & spreading of excavated surplace earth evenly. Erection,Testing, commisioning of cable as per the Specification mentioned in the NIT. |
| 19 | Erection, Installation of HDGI flat of size 25mm x 5mm for earthing of 1)Streetlight Poles |
| 20 | Erection, Testing, commisioning of 8 Mtrs Octagonal Pappeared H.D.G.I pole made out of 4m.m. thick plate and heavy provision for cable entry, having weight not less than 97kg. 4 Nos of J type M20x 750mm long foundation bolts of grade EN 8. Erection,Testing, commisioning of pole as per the Specification mentioned in the NIT. |
| 21 | Erection,Testing, commisioning of 70 W LED light fittings, of appproved make following specifications:-a) Rated Voltage : 230V AC, Power consumption 130W Voltage range :140 V AC to 280 V ACb)Power factor: >0.95c)Opertion Temp: -10 to 55 deg C.d)Total Harmonic Distortion(THD):<=10%e)Ingress protection :IP 65 minf) Over voltage, Over current, Internal SurgeProtection-YESg)LED Life Span:>50,000 Hrsh) White color LED, Glass type:Toughhned glass, Luminaries body: Aluminium casting Erection,Testing, commisioning of LED light fittings as per the Specification mentioned in the NIT. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender