Tender For Proposed Interior For The Office Of The Deputy Collector & Sdo , Canacona Goa.
Tender Value
9.07 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
8 days left
EMD
18155
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Interior For The Office Of The Deputy Collector & Sdo , Canacona Goa.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 2 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering shuttering and finishing :a)All works upto plinth level |
| 3 | Providing and and laying scratch resistant floor tiles in different sizes of Johnson Somany Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc. complete;a) 600x 600 mm Dark Shades |
| 4 | Dismantling wooden boarding in linings of walls & partitions excluding supporting members but including stacking within 50 meters lead.b)Thickness above 19mm and upto 25mm |
| 5 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 5 (1 cement : 5 coarse sand) in foundation and basement.Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level. |
| 6 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 7 | Waterproofing of sunken slabs toilet blocks terraces on slabs under brickbats roofs watertanks. Cleaning the surface and filling cracks (if any) applying EPCO ACR wherever necessary Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent |
| 8 | Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor treads of steps landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 9 | Providing and fixing vitrified glossy finished (600x600) and 10mm thick tiles in floor treads of steps landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 10 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 11 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. |
| 12 | Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade |
| 13 | Dismantling doors windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead. A)Of area 3 sq.m. and below |
| 14 | Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete cutting and making good the walls ad floors where required.a)W.C. pan with white plastic seat and lid. |
| 15 | Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:;110 mm dia |
| 16 | Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:b);75 mm dia |
| 17 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.a)110 mm dia |
| 18 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.b)75 mm dia |
| 19 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe)a)15 mm outer dia CPVC pipe |
| 20 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).b)20 mm outer dia CPVC pipe |
| 21 | Providing and fixing ball valve (brass) of approved quality a);High pressure with P.V.C. floats:2)20 mm nominal bore |
| 22 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern 32 mm diameter M.I. or C.P. brass trap and union complete including cutting and making good the walls where required.;Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps. |
| 23 | Providing and fixing white vitreous china pedestal for was basin complete recessed at the back for the reception of pipes and fittings. |
| 24 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers. |
| 25 | Providing and fixing brass stop cock (heavy) of approved quality b):;20 mm nominal bore |
| 26 | Providing and fixing brass bib cock (heavy) of approved quality :b)20 mm nominal bore |
| 27 | Providing and fixing 30mm thick factory made solid panel (PVC) door shutter consisting of frame made out of M.S.tubes of 19 guage thickness and size of 40mm x 20mm for stiles as well as top lock & bottom rail. M.S.Frame shall have a coat of metal primer of approved make and manufacture. M.S.Frame shall be covered with heat moulded prelam / Plain 'C' channel made from 5mm (±0.25) thick PVC Sheet of Density 600 Kg /Cbm Manufactured by an ISO-9000 certified Company of size 30 thickness 110mm width forming stiles in which 100 mm should be flat & 5mm should be taper and 5mm (±0.25) thick 135mm wide PVC Sheet for top rail and bottom rail in which 125 mm should be flat & 5mm taper on either side of panel. also for lock rail 145 mm sheet 125 mm should be flat & 5 mm taper on either side . An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive . Panelling of 10mm Prelam PVC sheet to be fitted in the M.S.Frame welded/sealed to the stiles & rails with 30mm wide x 5mm(±0.25) thick PVC sheet beading on either side and additional 30mm wide PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive.15mm thick (5mm(±0.25) x 3) 20mm wide cross PVC sheet as gap insert for top & bottom rail. Door to be fixed with frame with 3 Nos. M.S powder coated butt hinges of size 100mm*25mm*2mm and 50mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardware of door should be fixed with 25mm*8mm size steel screws etc. complete as per direction of Engineer-in-charge manufacturer's specification and drawing. |
| 28 | Providing and fixing Hand Shower (Health Faucet) with 8mm dia ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards. |
| 29 | Providing & fixing (4'') 100 mm sand cast iron grating for gully floor or nahni trap. |
| 30 | Providing and fixing sand cast iron trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors a)100 mm inlet and 100 mm outlet. |
| 31 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2:3 mix (1 cement: 1 1/2 coarse sand ;3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2 coarse sand :8 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.;Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 32 | Providing woodwork in frames of doors windows clerestory windows trusses & other frames wrought framed and fixed in positon.d)Second class matti wood |
| 33 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.b);40 x 3 mm flat iron hold fast 15 cm long |
| 34 | Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.;With cement mortar 1:4 (1 cement : 4 fine sand) |
| 35 | Providing and fixing 18 mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms vanity counters window sills facias and similar locations of required size approved shade colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch ups including rubbing curing moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade area of slab over 0.50 sqm;a)Jet Black |
| 36 | Cuddappah stone slab machine cut flooring over 20mm (average) thickness of cement mortar 1:4 (1 cement : 4 coarse sand laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete - 25 mm thick. |
| 37 | Centering & shuttering including Strutting Propping & removal of forms for :;Sides and Soffits of beams Beam Haunchings Cantilever Girders Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 38 | Providing and laying in position (1:2:4) reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement. (1 cement:2 coarse sand:4 graded stone agg 20mm nominal size);In beams suspended floors roofs having slope upto 15° landings balconies shelves chajjas intels bands plain window sills staircases upto floor five level |
| 39 | Providing TMT steel reinforcement bars of (SAIL TATA. VIZAG JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 23, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender