Tender For Renovation & Upgradation Of Gos Mess & Sos Mess Of 50Th Bn Itb Police, Ramgarh, Panchkula (Haryana).
Tender Value
51.51 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
14 days left
EMD
1.03 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation & Upgradation Of Gos Mess & Sos Mess Of 50Th Bn Itb Police, Ramgarh, Panchkula (Haryana).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling stone slab flooring laid in cement mortar including Stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 3 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 4 | Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. |
| 5 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 8 | Providing and fixing white vitreous China extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous China cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 9 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. |
| 10 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer in- Charge. 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand). |
| 11 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. |
| 15 | Providing and fixing toilet paper holder :C.P. brass |
| 16 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm |
| 17 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 18 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 19 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete , Flexible pipe 32 mm dia |
| 20 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore: 15mm nominal bore |
| 21 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen Sink without drain board size 610x460 mm bowl depth 200 mm |
| 22 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 24 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 25 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : With F.P.S. brick tiles |
| 26 | Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm. |
| 27 | Providing and fixing designed CP towel Rack Complete fixed to wall with CP brass screws with concealed fittings arrangement of approved quality and colour. Heavy duty / premium Class as per concerned IS Code 600 mm long and 270 wide as per direction of Engineer -in- charge. |
| 28 | Providing and fixing CP towel ring Circular shape with minimum distances of 37 mm from wall face with concealed fittings arrangement of Heavy duty / premium Class as per concerned IS Code and colour and as per direction of Engineer in Charge. |
| 29 | Providing and fixing C.P Brass Hand shower (Health Faucet) (ABS body ) with 8 mm dia 1.2 meter long flexible tube & wall Hook of Heavy duty / premium Class as per concerned IS Code and approved quality as per manufacturer specifications and directions of Engineer -in-charge |
| 30 | Providing and fixing SS ‘Door Lock , ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : Heavy duty / premium Class as per concerned IS Code. |
| 31 | Providing and fixing S S grating Three Layer of Heavy duty / premium Class as per concerned IS Code approved quality and colour. Circular type 100 mm nominal dia |
| 32 | Providing and fixing CP soap Dish Holder Heavy duty / premium Class as per concerned IS Code having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 33 | Providing and fixing Corner glass shelf of standard size with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 34 | Providing and fixing wash basin Rectangle shape with Round edges Size- 48Cm X 38Cm Heavy duty / premium Class as per concerned IS Code and make as approved by Engineer in charge . |
| 35 | Providing and fixing of swan neck mixer and tap for steel sink Heavy duty / premium Class as per concerned IS Code make as approved by Engineer in charge |
| 36 | Supplying and Fixing of Split air conditioning 1.5 Ton. complete with all accessories as required. Minimum 5 Star rating and 3-year warranty of all accessories except compressor and 5-year warranty of compressor. |
| 37 | Providing and laying two coats of polymer modified cementitious waterproof flexible coating using base coat of cement slurry made with cement @1.75 kg/sq m and accrrocrete or equivalent (Acrylic based chemical @1kg/sq m after cleaning the surface thoroughly free of all foreign particles such as laitance etc. Note -: After laying the fiber reinforced mesh synthetic on the whole roof , it will be covered up to 15 cm by overlap for all the joints and over parapet wall side ) and top protective layer of cement and slurry made with cement @1.58 kg/sqm and accrocrete or equivalent (Acrylic based chemical ) @ 0.83 kg/ sqm and curing etc. complete as per the direction of Engineer- in-charge. (The surface area of roof shall be measured for payment. the work shall be carried out by the specialized agency. having experience in polymer based water proofing work & specialized agency shall be got approved ( 5 year warranty for Water Proofing Work ) by the Engineer-in-charge before execution of work) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender