Tender For Providing Name Board, Dye Cast Letter And Marking Arrangements For Pre-Fabricated Workshop Building For Centres Of Excellence In Government Polytechnic College At Krishnagiri In Krishnagiri District.
Tender Value
4 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
6 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Krishnagiri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Name Board, Dye Cast Letter And Marking Arrangements For Pre-Fabricated Workshop Building For Centres Of Excellence In Government Polytechnic College At Krishnagiri In Krishnagiri District.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and Fixing of Aluminium Dye Cast Letters of following size of approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes. The rate is inclusive of all charges such as conveyance of letters, fixing the letters to the wall tiles (or) granite etc., and with necessary scaffolding charges and redoing the wall to the original condition etc, complete as directed by the departmental officers. |
| 2 | Aluminium Dye Cast Letters of size 12\\" |
| 3 | Aluminium Dye Cast Letters of size 9\\" |
| 4 | Aluminium Dye Cast Letters of size 10\\" |
| 5 | Emblem - 24\\" |
| 6 | MS LOGO |
| 7 | Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts of best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc., in a complete form using coir and nails 1m run. |
| 8 | Supplying and fixing of Name board for the building using 3mm thick foam sheet over which blue colour over which acrylic sticker has to be pasted. The details of the name board such as texts, font shapes, styles and sizes as provided by the departmental officers. The rate inclusive of material charges, labour charges, conveyance, adhersives and other charges etc., |
| 9 | Supplying and fixing of Aluminium ladder of 7m height with necessary fittings etc., complete as directed by the departmental officers. |
| 10 | Supplying and erecting in position of following litres capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.(a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set(c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents/Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No.Low Pressure Switch - 1 No.,Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. |
| 11 | 50 litres |
| 12 | Supplying and fixing the damaged UPVC (Designed to handle higher pressure) pipes of Class 5 approved quality and best veriety conforming to ISS with ISI mark, of the the following size above Ground level up to 4 M hight laid properly to alignment including cutting, threading and fixing the required PVC specials but excluding the cost of such specials and fixing to the wall with necessary TW plugs, clamps and screws, making holes on the wall or drilling holes in the roof and making good dismantled portion to original condition with necessary brick work, concrete and plastering wherever necessary with necessary scaffolding charges etc., complete complying with standard specification. |
| 13 | 25mm dia UPVC pipe |
| 14 | Supplying and fixing in position the following UPVC Specials best approved quality conforming to BIS and providing leak proof joints with PVC adhesive etc., including fixing to walls with necessary leak wood plugs screws etc., and fiving connections to the UPVC pipe dismanting the brick masonry RCC floor or roof slab and redoing the disturbed portion to original conditions etc., complete complying with standard specification. (The UPVC specials should be got approved from the Executive Engineer before use on works) |
| 15 | 25mm dia UPVC Elbow |
| 16 | 25mm dia UPVC Tee |
| 17 | 25mm dia UPVC Union |
| 18 | 25mm dia UPVC Coupling |
| 19 | SUB TOTAL |
| 20 | GST @ 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender