Tender For Comprehensive Repairs To Otm Accn Of Zone Iv, Viii And Zone-Ix At Age B&R-I (South) Under Ge (South) Ambala Cantt.
Tender Value
50 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
9 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repairs To Otm Accn Of Zone Iv, Viii And Zone-Ix At Age B&R-I (South) Under Ge (South) Ambala Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less, including demolition complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth (without using extra cement) including taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc, up to 12 mtr height of bldgs complete all as specified and as directed. |
| 3 | Material and Labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar (1:4) finished the surface even and smooth (without using extra cement) including taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc, up to 12 mtr height of bldgs complete all as specified and as directed. |
| 4 | Material and Labour for 10mm thick plaster in CM 1:3 finished even & smooth (without using extra cement) in patches as in ceilings and the like including taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 5 | Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and labour for brick work with sub class B bricks , straight or curved on plan exc 6m plaster mean radius, built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for brick work with sub class-\\"B\\" Bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Except bricks) complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Material and labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Demolition of cement concrete (unreinforced) of any description not otherwise provided for etc; completed as specified and directed & removal of all demolished material & debris outside the MoD land, complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Material and labour for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) as in plinth protection finished even and smooth (without using extra cement) with & including 10mm wide, 30mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with 85/25 graded bitumen and sand (1:3 ratio) mixture complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Material and labour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm grded stone aggregate) as in sub base of floor/path, etc complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material and labour for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in flooring subbase layer complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Supply and fixing of heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by Engineer-in-Charge, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortor (1:4) bed, complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Material and labour for First quality, Non skid ceramic, coloured, rectified i.e. straight edge (locally known as joint free) tiles of size 600 x 600mm each and of thickness not less than 7mm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match the shade selected quality laid over and including 15mm thick screed bedding layer in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Material and labour First quality, Non skid ceramic, coloured, rectified i.e. straight edge (locally known as joint free) tiles of size 600 x 600mm each and of thickness not less than 7mm, in skirting etc (by cutting the tiles to required height). over & including 10 mm thick cement mortar (1:4) screed, set and jointed with tile adhesive with notched trowel and pointed in grout of matching shade of tiles, complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Material & Labour for first quality glazed ceramic coloured tiles 450x350x7 mm thick on vertical surface over 10 mm thick rendering in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Material and labour for premium quality vitrifed tiles dark shade double charged 9 to 10mm thick (square/rectangular) polished area of each tile n exc 0.64 sqm in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tile over 15mm screed bed 1:4 CM complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Demolition stone slab of any description or thickness, laid, bedded and pointed in any mortar, complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Material and labour for 18 to 20mm thick Granite stone of black shade work (table rubbed, polished & moulding), as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding, polishing, rounding and moulding of stone slabs on edges, complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labour for machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Material and labour for machine cut pre polished kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base 10 mm thick in CM 1:4 including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Supply and fixing of 5 mm thick solid coloured / textured PVC sheet, solid PVC wall paneling/ lining PVC sheet inclusive of solvent cement and fixing at site with and including 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and directed including taking down of existing wall lining, board or insulation board including cover fillets of any type and thickness complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Supply, fabricate & fixing in repair in position of anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 5.5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including the cost of EPDM rubber /neoprene gasket required complete all as specified and as directed by Engineer-in-Charge.(a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831)(b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832)(c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736)Note:- Section No given above are of make Jindal, Contractor may use similar section of other make |
| 26 | Supply and fixing 5.5 mm thick tinted glass in square exceeding 0.5 sqm in each pane with heat reflecting properties, fixed to aluminium frame with glazing clips, etc., complete all as specified and as directed. |
| 27 | Supply and fixing in repair of aluminium alloy anodized (powder-coated) door frame and shutters with hollow aluminium anodized sections as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip, jointing cleats, rubber packing, gasket, lock 4 levers, 02 Nos aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members etc. with rawl plugs complete all as specified and as directed by Engineer-in-Charge. Sections of frame and door shall be as follows : - a) Door Frame single groove 101.6 mm x 44.45 mm x 2.15mm thick (b) Shutter top 47.62 mm x 44.45 mm x1.95 mm thick. (c) Shutter bottom 114.30 mm x 44.45 mm x 2.1 5mm thick.(d) Shutter vertical 85 mm x 44.45 mm x 1.80 mm thick.(e) Shutter middle 83.5 mm x 44.45 mm x 2.40mm thick.(f) Gauging clip weighing not less than 0.097kg/metre.NOTE : 1. Glass pane shall be measured and paid separately. |
| 28 | Supply and fixing in repair of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC bldg board or commercial plywood, fixed with aluminium angled frame and two CP MS hanging arrangements complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Supply and fixing in repair of aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 30 | Supply and fixing in repair of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 150mm all as specified and as directed. |
| 31 | Supply and fixing in repair of 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane with oil putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge.NOTE: - Glass will be fixed upto 12 metre height bldgs. |
| 32 | Supply and fixing in repair of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed. |
| 33 | Supply and fixing in repair sheet glass 4mm thick, ordinary quality , in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters complete all as specified and as directed. |
| 34 | Dismantling wrought iron or mild steel work of any description in steel trusses, purlins, roof railings, grills etc complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Supply and fixing of mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe-410(Gde 250), complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Supply and fixing of mild steel, framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks and similar work including pintal hinges, stops hand made sliding bolts etc conforming to Fe-290 (Gde E-165) complete all as specified and as directed by Engineer-in-Charge. |
| 37 | Supply and fixing in repair semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 476 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiling using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long,4mm dia wire incl necessary hunging arrangement as per manufuture instruction complete to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos/PVC/ metal / Gypsum sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and as directed by Engineer-in-Charge.NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and as directed by Engineer-in-Charge. |
| 38 | Taking down shutter of any description exceeding 1 sqm and not exceeding 2 Sqm each and refixing in same opening after easing and adjusting etc complete all as specified and as directed by Engineer-in-Charge. |
| 39 | Demolition and breaking up drain pipes internal dia 100 mm in wall or floor position (Salt glazed ware, AC or Reinforced concrete,PVC or any other type ) complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Supply and fixing PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall including fittings complete as specified and directed. |
| 41 | Taking up or down steel tubing 15mm bore of pipe & connections & removal from site complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Taking up or down steel tubing 20mm bore of pipe & connections & removal from site complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Supplying and laying of CPVC pipes 16mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Dismantling water tanks exc 500 ltr & n. exc 1000 ltr capacity & removal from site complete all as specified and as directed by Engineer-in-Charge. |
| 46 | Supply and fixing water storage tank of 1000 ltr capacity, HDPE double layer,fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Supply and fixing in repair Vitreous China Half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including flush pipe, CP waste fitting, grating and Union for discharge pipe ,waste pipe complete all as specified and as directed by Engineer-in-Charge. |
| 48 | Supply and fixing in repair Vitreous china white wash hand basin, flat back size 550x400mm including brackets, waste pipe and waste fitting 40 mm brass chromium plated complete all as specified and as directed by Engineer-in-Charge. |
| 49 | Supply and fixing in repairs vitreous China squatting pan of “Orissa Pattern” of size 580x440mm coloured with integral footrest complete including making good floors complete all as specified and as directed by Engineer-in-Charge. |
| 50 | Supply and fixing in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe complete all as specified and as directed by Engineer-in-Charge. |
| 51 | Supply and fixing in repair pillars taps fancy type chromium plated cast copper alloy with capston head long screwed shanks of 15mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 52 | Supply and fixing in repair 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and as directed by Engineer-in-Charge. |
| 53 | Supply and fixing in repair 15mm bore angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge. |
| 54 | Supply and fixing in repair Soap dish any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Supply and fixing in repair chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed by Engineer-in-Charge. |
| 56 | Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed by Engineer-in-Charge. |
| 57 | Supply and fixing PVC (SWR) pipes 75mm bore single socketed , in any length with rubber ring joints , laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge. |
| 58 | Supply and fixing PVC (SWR) P trap110mm size complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Supply and fixing 75mm PVC (SWR) floor trap , plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Supply and fixing PVC (SWR) vent cowl 110mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Supply and fixing PVC (SWR) bends any radius 75mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Supply and fixing PVC (SWR) bends any radius 110mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Supply and fixing in repair 20 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm & removal from site complete all as specified and as directed by Engineer-in-Charge. |
| 65 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n. exc 4 sqm & removal from site complete all as specified and as directed by Engineer-in-Charge. |
| 66 | Material and Labour for Solid WPC Door frame size ( 125mm X 65mm Double Rebate ) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by the Engineer-In-Charge. The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity. |
| 67 | Material and Labour for Solid WPC Door frame size ( 100mm X 65mm Single Rebate ) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by the Engineer-In-Charge. The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity. |
| 68 | Material and Labour for 30 mm thick moulded WPC factory made 100% solid door (confirming as per IS : 4020) made from 100% lead free single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kh/cum.Manufactured by an ISO: 9001-2015 certified company.The door should be water proof,termite poof, fire retardent and having screw holding capacity complete all as specified and as directed by Engineer-in-Charge. |
| 69 | Material and Labour for 30 mm thick Factory Made 100% Solid WPC ( Wood polymer Composite ) gauzed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ),alcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws incl Aluminum Jali and Stainless wiremess as per required. complete all as specified and as directed by Engineer-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company |
| 70 | Supply and fixing of cold rolled mild steel butt hinges 100 mm long medium weight complete all as specified and as directed by Engineer-in-Charge. |
| 71 | Supply and fixing aluminium anodised extruded fabricated type handle 150mm long complete all as specified and as directed by Engineer-in-Charge. |
| 72 | Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250 mm long and fixing with bolts extruded sections complete all as specified and as directed by Engineer-in-Charge. |
| 73 | Supply and fixing 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Material and Labour for Preparation of new painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of Red oxide zinc primer complete all as specified and as directed by Engineer-in-Charge. |
| 75 | Material and labour for preparation of new plastered surface of walls, application of waterproof cement based putty @0.80kg (undiluted) per sqm of avg thickness 1.00mm in two coats & applying two coats of oil bound distemper with mechanical spray machine complete all as specified and as directed by Engineer-in-Charge. |
| 76 | Material and labour for preparation of new plastered surface of walls , application of waterproof cement based putty @0.80kg (undiluted) per sqm of avg thickness 1.00mm in two coats & applying one coats of anti fungal weather proof grade exterior acrylic emulsion paint with mechanical spray machine complete all as specified and as directed by Engineer-in-Charge. |
| 77 | Material and labour for preparation of new plastered surfaces on ceilings and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 78 | Supply and fixing in repair 32mm dia S/S fancy type drapery rod including taking out of old pelmet/bracket complete all as specified and as directed by Engineer-in-Charge. |
| 79 | Supply and fixing fancy type powder coated mild steel elbows fixing at ends of drapery rod/curtain rod, power coated brackets fixed on wall with screwed complete all as specified and as directed by Engineer-in-Charge. |
| 80 | Supply and fixing 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge. |
| 81 | Dismantling asbestos cement, steel roof sheets (corrugated, semi corrugated etc) sheets any pattern in roof covering in patches etc of any description complete all as specified and as directed by Engineer-in-Charge. |
| 82 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge. |
| 83 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge. |
| 84 | Supply and fixingof 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc incl Fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed by Engineer-in-Charge. |
| 85 | Supply and fixing in repair aluminium frame powder coated for partition /cubicals with one or more rebates including jointing cleat/ screws/ fasterners for fixing etc complete all as specified and directed by Engineer-in-Charge. Note : Minimum thickness of powder coating 50 micron and thickness of aluminium section shall be 3mm. |
| 86 | Supply and fixing in repair 5.50mm thick sheet glass, ordinary quality and glazing in opening exc 0.50 sqm in each pane fixed in aluminium frame as per site requirements complete all as specified & as directed by Engineer-in- Charge |
| 87 | Material and labour for water proofing treatment of sunken floor of WCs, bathroom, etc by applying of the following specifications complete all as specified. (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. and remove all loose /unsound material, dirt, dust etc. (ii) Applying cement slurry mixed with acrylic based polymer modified cementitous composite compound coating. First layer of cement slurry @ 0.488Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.253 Kg/ Sqm and allow it to air dry for 04 hours. Second layer of cement slurry @ 0.242 Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.126 Kg/ Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours. (iii) 200 micron thick polythene film shall be pasted with help of adhesives over treatment. complete all as specified & as directed by Engineer-in- ChargeNote- Joints of WC/ Trap/ Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work. |
| 88 | Supply and fixingin repair health faucet ABS body with 1 metre long stainless steel tube and wall hook complete all as specified & as directed by Engineer-in- Charge. |
| 89 | Supply and fixing in repairs,Vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe, P or S trap,) complete all as specified & as directed by Engineer-in- Charge. |
| 90 | Supply and fixing in repairs for PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed by Engineer-in- Charge |
| 91 | Material and labour forCutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends of edges of landings, steps, cills etc., and cutting chases for concealed water tubing and making good complete. |
| 92 | Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc complete all as specified and as directed by Engineer-in-Charge. Note : Quantity will be measured perimeter of wall x depth of penetration. |
| 93 | Supply and fixing in repair central hole basin mixer cast copper alloy with 450mm braided conncection pipe ( without popup) , fancy type chromium plated screwed down , high pressure, with or without lettered 'Hot' or 'cold' screwed for 15mm bore iron pipe or brass ferrule complete all as specified and directed by Engineer -in-Charge |
| 94 | Supply and fixing in repair of stainless steel sink with drainage board 1.00 mm thick, for kitchen with plug, washers and wastes, including bedding in cement mortar on to dwarf wall or fixing contilever brackets of suitable angle iron, CP brass waste coupling, superior quality PVC waste pipe and connecting union to pipe, over all size 915mm x460mm, bowl size 410mm x 330mm x160mm complete all as specified and as directed by Engineer-in-Charge. |
| 95 | Supply and fixing in repair of chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union with shower arm complete all as specified and as directed. |
| 96 | Supply and fixing of anodised aluminium grill of diamond size 100x100mm of dia 6mm including necessary joining cleats, anodised aluminium snap beading screws, complete all as specified and as directed by Engineer-in-Charge. |
| 97 | Supply and fixing in repair of mortice lock vertical type 4 levers 100mm size of mild steel body of approved make with two sets of keys complete all as specified and as directed by Engineer-in-Charge. |
| 98 | Supply & fixing in repair double spring floor machine for aluminium/ toughened door upto 100kg capacity built of MS and having SS 304 cover plate, capable of holding the doors in 90 degree & 115 degree hold open position & close the door with reducing speed complete including the opening of door panel & refixing with adjustments complete all as specified and as directed by Engineer-in-Charge. |
| 99 | Supply and fixing windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2 Nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes. (Make: A2Z Infra Solutions/ Elixir Metform Pvt Ltd./ Lakshmi Fabrications) complete all as specified and as directed by Engineer-in-Charge. |
| 100 | Material and labour for providing 3 mm thick APP (Atactic polypropylene polymer) modified prefabricated five layer, weight not less than 3.6 Kg/Sqm water proofing membrane, black finished, reinforced with Non-woven polyster matt make as approved over roof consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25º C temperature and viscocity 70-160 Cps. over the primer coat, the layer membrane shall be using butane torch and sealing all joints etc. after preparing the surface complete applying two coats of bituminous based Aluminium paint @ 0.2kg/sqm complete over and including 10mm thick cement plaster in CM (1:4) on RCC roof slab including cleaning of existing using WPC @ 2% by wt of cement complete as per standard practice as per manufactuter's instructions all as specified and directed.The vital physical and chemical parameters of the membrane shall be as under:- (i) Joint strength in longitudinal and transverse direction at 25º C as 650/450 N/5 Cms.(ii) Tear strength in longitudinal and transverse direction as 300/250N/5 Cms. Softening point of membrane not less than 150º C cold flexiblility up to 20º when tested in accordance with ASTM (D-5147)(iii) The laying of membrane shall be carried out through the manufacturer or their authorized applicator only. |
| 101 | Material and labour for 40mm thick PCC 1:2:4 in levelling above roof surface/ in sunken below tiles over cement slurry @3kg/ sqm as directed in required gradient complete all as speciifed & as directed |
| 102 | Material and labour for repair to steel rolling shutters (chain pulley type ) not exc 12 sqm each in area as clear opening by replacing unserviceable parts such as pulley ,springs hood cover anchoring rod ,ball bearings ,shafts etc including neccessary welding ,cleaning greasing, oiling making in seviceable condition as required one coat of red oxide zinc chrome primer including taking down rolling shutters and re-erecting/re-fixing the rolling shutters in same location complete all as specified and as directed by Engineer-in-Charge. |
| 103 | Material and labour for repair to steel rolling shutters (gear operated type ) exc 12 sqm not exc 25 sqm each clear opening by replacing unserviceable parts such as gear box ,springs hood cover anchoring rod ,ball bearings ,shafts etc including neccessary welding ,cleaning greasing, oiling making in seviceable condition as required one coat of red oxide zinc chrome primer including taking down rolling shutters and re-erecting/re-fixing the rolling shutters in same location complete all as specified and as directed by Engineer-in-Charge. |
| 104 | Material and labour for running welding in repairs thickness of metal to be welded not exc 6mm including cleaning and preparing the surface to be welded together , holding the members in true position while welding and bevelling of edges as required in the case of metal exc 3mm thick complete all as specified and as directed |
| 105 | Supply and fixing in repair of helical spring of size not exc 50 Cm long as required for rolling shutters etc complete all as specified and as directed by Engineer-in-Charge. |
| 106 | Supply and fixing in repair of helical spring of size exc 50 Cm long as required for rolling shutters etc complete all as specified and as directed by Engineer-in-Charge. |
| 107 | Supply and fixing in repair Mild steel gear box including gear wheel of rolling shutters machine cut with vertical MS shaft 25 cm bore heavy grade etc complete all as specified and as directed by Engineer-in-Charge. |
| 108 | Supply and fixing in repair to steel rolling shutters (gear operated type ) with bevel gear box and crank handle with ball bearing and thickness of lath 1 mm as specified incl top cover anchoring rod ,hasp and staple and one soft coat of primer erected in position as indicated complete push or pull or manual type gear operated type bevel gear box crank handle complete all as specified and as directed by Engineer-in-Charge. |
| 109 | NOTE:- Amount of credit of Rs. 2,21,686.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender