Tender For special Repair / Replacement Of Electric Items At Bldg No D-110 Aps And Provn Of Cemented Interlocking Tiles And Allied Wks At Various Locations Of Shahbaaz Suvidha Complex Under Ge Saugor
Tender Value
16.35 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
15 days left
EMD
32700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair / Replacement Of Electric Items At Bldg No D-110 Aps And Provn Of Cemented Interlocking Tiles And Allied Wks At Various Locations Of Shahbaaz Suvidha Complex Under Ge Saugor
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 2 | Demolition of cement concrete (reinforced) below or above the ground floor, not exc 15cm thickness (reinforcement cut as required to facilitate demolition) such as in cooking platform, chajja etc complete all as specified and directed. |
| 3 | M&L for Dismantling floor, hearth or wall tiling, including cement mortar bedding (but notbacking), any description including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and pavings (below or above ground level), n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundations/ mass concrete complete all as specified and directed. |
| 6 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 7 | M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, girth not exc 10 cm complete all as specified and directed. |
| 8 | M&L for mild steel TMT bars 10 mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 9 | M&L for precast reinforced cement concrete 1:2:4, type 1 (using 20 mm graded aggregate, Nominal mix)) as in manhole cover slab etc ,including necessary form work, set in cement mortar 1:4 complete all as specified and directed. |
| 10 | M&L for Non skid ceramic coloured tiles in floors etc,7 to 8mm thick, area of each tiles exc 0.11 sqm but n'exc 0.18 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 11 | M&L for digital glazed ceramic tiles, coloured tiles 300mm x 600mm x 7mm thick on vertical surfaces ie. as in skirting/dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed in cement mortar (1:4) complete all as specified and directed. |
| 12 | M&L for mirror polished machine cut Kota stone slab flooring 16-18 mm thick size not less than 550mmX550 mm, laid over and including 20 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete. all as specified and directed |
| 13 | M&L machine cut kota stone slab 18-20mm thick as in skirting, steps riser etc laid over 10mm thick plaster in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing complete all as specified and directed. |
| 14 | M&L for 16 to 18mm thick Granite slab of any shade (table rubbed and polished), machine cut for floors / shelves in steps, jambs, pillars, window cills & cooking platforms laid over and including 15 mm thick cement mortar 1:4 bedding, pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs, complete all as specified and directed |
| 15 | M&L for rounding to the edge of stone slabs one edges such as in steps, cooking platform and other similar situations complete all as specified and as directed. |
| 16 | M&L for 40mm thick PCC (1:2:4) type B-0 (using12.50mm graded stone aggregate) as in floors, finished surface even and smooth using extra cement complete all as specified and directed. |
| 17 | S&F Glass dividing strips dividing strips, 3mm thick and 38mm wide, inserted in position, conform to design complete all as specified and as directed. |
| 18 | M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in sub base for floors, finished surface even and rough to receive the top finishing floor course complete all as specified and directed. |
| 19 | M&L for 25mm thick PCC (1:2:4) type B-0 (using12.50mm graded stone aggregate) as in levelling course to sub base, finished surface rough to receive the tiles complete all as specified and directed. |
| 20 | M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base for floors, finished surface even and rough to receive the top finishing floor course complete all as specified and directed. |
| 21 | M&L for rendering cement plaster, 20mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing on wall in cement mortar 1:6 complete all as specified and as directed. |
| 22 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 23 | M&L for rendering cement plaster, 5mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for providing, cement concrete Type B0 1:2:4 (using 12.5mm graded aggregate) in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 25 | M &L for applying three coats of white wash on newly plastered wall surfaces including preparation of these surfaces complete all as specified and directed. |
| 26 | M&L for applying two coats of synthetic distemper, white or tinted on new wall surface including preperation of surface complet all as specified and direced. |
| 27 | M&L for applying two coats of synthetic distemper, white or tinted on old wall surface including preperation of surface complet all as specified and direced. |
| 28 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed. |
| 29 | S&F PVC (SWR) bends, 110mm bore dia complete all as specified and directed. |
| 30 | S&F 110mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius, complete all as specified and directed. |
| 31 | S&F in repair 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 32 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed. |
| 33 | S&F PVC (SWR) bends, 75 mm bore dia complete all as specified and directed. |
| 34 | S&F in repair 75mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 35 | S&F in repairs of 75mm dia PVC (SWR) floor trap SS grating including jointing with solvent cement complete all as specified and directed.. |
| 36 | M&L for GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 37 | M&L for refixing GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 38 | M&L for GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 39 | M&L for refixing GI tubing 20mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 40 | Cutting 15/20mm Bore existing steel tubing for alterations or additions (Each cut measured) complete all as specified and directed |
| 41 | Screwing 15/20mm Bore existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed |
| 42 | S&F, in repair 20mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed. |
| 43 | S&F Soap Dish Holder with wall flange , chromium plated with required accessories complete in all respect including taking down existing Soap Dish Holder of any description, as specified and directed .Make Jaquar (Cat Part No CPA-CHR-1131) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 44 | S&F Bib cock with wall flange, chromium plated, including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No FUP-CHR-29037PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 45 | S&F Angular Stop Cock with Wall Flange, chromium plated with required accessories including taking down existing tap of any description, complete in all respect as specified and directed. Make : Jaquar (Cat Part No FUP-CHR-29053PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 46 | S&F in repairs 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe complete all as specified and directed. |
| 47 | S&F Pillar Cock, chromium plated with required accessories complete in all respect including taking down existing tap of any description, as specified and directed. Make : Jaquar (Cat Part No FUP-CHR-29001PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 48 | S&F 15mm bore dia CP Exposed part kit concealed stop cock & flush cock with fitting sleeve, Operating lever & Adjustable wall flange with seal, incl regular Body of Concealed Stop Cock Cold Only Suitable for 15mm Pipeline with Protection Cap including taking down existing stop cock of any description, complete in all respect as specified and directed. Make : Jaguar ( Cat Part No.: exposed part : FUP-CHR-29083K , concealed part : ALD-083R, ALD-083L/ ALD-089R/ ALD-089L/ALD-081) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 49 | S&F Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer), chromium plated with required accessories complete in all respect including taking down existing Hand Shower of any description, as specified and directed.Make Jaquar (Cat Part No ALD-CHR-577) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 50 | S&F in repairs of 100mm dia Stainless steel grating (Primium quality)with or without waste pipe hole including jointing with solvent cement complete all as specified and directed.. |
| 51 | S&F in repair 15mm dia SS-304 Heavy Duty Connection Pipe for Wash Basin, Geyser, Hot & Cold Water, Basin Mixer | Leak Proof Flexible Tap Connector Pipe | Rust Free, Durable, Long Life ,,450 mm long, complete all as specified and directed. |
| 52 | S&F in repair 15mm stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 53 | S&F Single Towel Rail 600mm Long, chromium plated including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- (Cat Part No CPA-CHR-1111) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 54 | S&F Vitreous china Table Top Basin, Size: 425x340x175 mm, white, Including with Waste coupling 32mm Size Half Thread with 130mm Height ,waste pipe, pvc connections and Single Lever Tall Boy with 190mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses with required accessories complete all as specified and directed.Note : Pillar tap/mixer and PVC connection will be measured paid separately.Make : Jaquar (Cat Part No CNS-WHT-903-Basin), Cat Part No ALD CHR -709L130-waste), (Cat Part No FUP-CHR-29005BPM-mixer) |
| 55 | S&F Vitreous china vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe complete fixed including dismantling/taking down existing WC of any description, complete all as specified and directed.Make : Jaquar (Cat Part No ECS-WHT-451 or equivalent Hindware/ johans/ parryware |
| 56 | S&F Vitreous china Rimless Single Piece WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories and Accessories Set, Size: 370x665x750 mm, p or S Trap including dismantling/taking down existing WC of any description, complete all as specified and directed.Make : Jaquar (Cat Part No CNS-WHT-853P180SPPSM/CNS-WHT-853S220SPPSM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 57 | S&F 32mm bore dia bottle trap size with 300 mm & 190mm wall connection pipes & wall flange chromium plated incl required concealed pipe up to trap with required accessories complete in all respect including taking down existing bottle trap/ waste coupling of any description, as specified and directed.Make Jaquar (Cat Part No ALD-CHR-769LX300X190) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 58 | S&F in repair Urinal with Spreader Hole and Fixing Accessories , including Spreader, flush pipe. grating and union for discharge pipe set, fixing plugs, bedding urinal on wall in CM 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement, connection to flushing cistern with required accessories complete in all respect as specified and directed by Engr-in-charge. Make Jaquar (Cat Part No URS-WHT-13261H) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 59 | S&F Wall Hung Cistern (Compatible with 39mm Drainage Pipes) with Black Top & Installation Kit with Drainage Pipes of require length, connectyion to WC complete including dismantling/taking down existing cistern of any description, complete all as specified and directed.Make : Jaquar (Cat Part No ESH-WHT-184NBTT or equivalent Hindware/ johans/ parryware |
| 60 | S&F Toilet Roll Holder with wall flange , chromium plated with required accessories complete in all respect as including taking down existing Toilet Roll Holder of any description, specified and directed . Make Jaquar (Cat Part No CPA-CHR-1151) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 61 | S&F Glass Shelf 600mm Long, with required accessories complete in all respect including taking down existing Glass Shelf of any description, as specified and directed . Make Jaquar (Cat Part No CPA-CHR-1171) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 62 | S&F rotational moulded poly-ethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position including 20mm PTMT float valve assembly including accessories and dismantling of old tank (any description and capacity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 63 | S&F rotational moulded poly-ethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position including 20mm PTMT float valve assembly including accessories and dismantling of old tank (any description and capacity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 64 | S&F in repair purposely moulded looking mirror 5mm thick glass (width not less than 600mm) fixed with studs complete all as specified and directed.Make : Saint-Goblin/Modi Guard/Asahi India (AIS) |
| 65 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. |
| 66 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder |
| 67 | S&F 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with 2mm thick Plain colour PVC sheet fixed or laid on one side of board and 2mm thick wood grained prelam PVC sheet on other side of board , using rubber based adhesive, including heat bent of PVC sheet as lipping on the edges of doors, supplying & fixing at site as per specification complete all as specified and directed.Note : Total thickness of door shall be 35mm approx) |
| 68 | M&L for Second class hard-wood in scantlings, Timber framed and fixed, Clean sawn including preparing surfaces and treated with creosote complete all as specified and directed. |
| 69 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surface of any description, not otherwise descri-bed, over 10cm width or girth including preparation of surfaces complete all as specified and directed. |
| 70 | S&F 150mm size stainless steel handle, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 71 | S&F 150mm long stainless steel barrel tower bolt, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 72 | S&F 200mm long stainless steel barrel tower bolt, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 73 | S&F 300mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel nut & bolts and fixed complete all as specified and directed. |
| 74 | S&F100mm long stainless steel butt hinges, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 75 | S&F 150mm long stainless steel floor door stopper, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 76 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm single sideprelam colour PVC sheet, reinforced with M.S. Square tube including painting edges to match with prelam sheet, fixed in opening as per specification & drawing complete all as specified and directed. |
| 77 | S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed.Note : Aluminium section(s) thickness shall not be not less than 1.50 mm. |
| 78 | S&F Factory made 30mm thick (stiles), Solid PVC Moulded Door Shutter with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixed in frame at site as per specification & drawing complete all as specified and directed. |
| 79 | S&F for powder coated alumium glazed window shutter sliding type using 1.80 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rails 100x44mm. Make - jindal/Hindalco including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and including glazing by using 5mm thick plain sheet glass and stainless steel wire mess of dia 0.36mm and aperture 1.4mm, complete all as specified and as directed. ((Note-glazed shutters glass thickness not less than 5.00 MM and wiremess shutter with SS wiremesh as approved by GE is also included. No extra payment will be made separately) |
| 80 | M&L for Dismantling timber scantlings 40 sq. cm and over in section, in any position, framed work complete all as specified and directed. |
| 81 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m in any type of soil complete all as specified and as directed. |
| 82 | S&F 60mm thick Machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment, any shape and size confirming to IS- 15658-2006 of M-35 grade, laid on 50mm thick sand cushion complete all as specified and directed.Note: The cost of sand cushion shall be deemed included in quoted unit rates. |
| 83 | M&L broken stone or boulders hard core of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 84 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering for compaction complete all as specified and directed. Note : compacted thickness shall be measured for payment purpose. |
| 85 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed. |
| 86 | M&L for Brick work with sub- class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed |
| 87 | Taking down carefully copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 88 | M&L for concealed point wiring for one light point or fan/exhaust point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC conduit of size not less than 20mm, ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size modular metal boxes with cover plate along with frame for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description of wiring cable complete all as specified and directed. Note:-(i) Wiring cable shall be provided using colour coding such as Phase - Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge .(ii) Cutting, chasing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before. |
| 89 | All as per item No. 88 above but point wiring for one 5 Amp socket point on independent board controlled by one switch and with 2.5 Sqmm wiring cable. |
| 90 | All as per item No. 88 above but point wiring for one 3 pin ,5 Amp socket point on the same board with other switch and 2.5sqmm wiring cable. |
| 91 | All as per item No. 88 above but point wiring for 15/16A socket outlet with 2.5 Sqmm wiring cable. |
| 92 | S&F Modular switch, one way, 5/6 Amp 230, 1 module complete all as specified and directed. |
| 93 | S&F Modular socket outlet, 5/6 Amp-2/3 pin combined, 2 module complete all as specified and directed. |
| 94 | S&F switch Modular, single pole, one way,15/16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 95 | S&F socket outlet modular 6/16 Amp, 5/6 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 96 | S&F ceiling rose, surface backlit, three terminal complete all as specified and directed. |
| 97 | S&F MCB SP 240 volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 98 | S&F MCB SPN 240 volt 40 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 99 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8way, 240 V with 200 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. |
| 100 | Disconnection all electric connections and taking down carefully existing ceiling fan (any description and size and capacity), dismantling blades and deposited to AGE E/M store yard complete all as specified and directed. |
| 101 | S&F ceiling fans with brushless direct current motor (BLDC),1200 mm sweep, 230 V, 5 star rated, having minimum air delivery 210 CFM with service value 6.00 BEE along with remote control, canopy, down road (not les than 250mm), hanging clip, rubber real, nut bold and washer, locking pin, connecting cable etc) including taking down existing ceiling fans of any description, type a and size including disconnection of electric connections and deposited to AGE E/M store yard complete all as specified and directed.Make : Havells Modle-Festiva Prime BLDC / Crompton: Model-Energion Groove Regulator/ equivalent make in bajaj / Philips |
| 102 | S&F Tube light fitting 20/18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directedMake : Havells - Cat no LHEXAPP7PN1W020/ Bajaj - Beam Pro Batten 830412 Philips -Ujjwal/ slim line Batten 919515814053/ Orient - LBLN -18-C-SQ |
| 103 | S&F box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.Make : Havells - Cat Part No LHEXBLP7IN1W009 or eqvt in bajaj cat part No BCLSB10WH/ CG Cat Part No LCTL-9-CDL |
| 104 | S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 105 | S&F LED bulb 9/10 watt suitable for angle / batten holder fitting complete all as specified and directed.Make\\" havells/ Philips/Bajaj |
| 106 | S&F suspended type LED light of 36W of suitable limin with aluminium housing including all necessary attachment required for suspension complete all as specified and directed.Make: Havells cat part No LICONLP36WLED840SPCGRY or equivalent make in Philips / Bajaj |
| 107 | S&F exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 300 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans including taking down existing exhaust fans of any description, type a and size including disconnection of electric connections and deposited to AGE E/M store yard complete all as specified and directed.Make : Havells / Crompton / bajaj / philips |
| 108 | S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver, holder & connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make : Havells - cat no RUGBYGENXFTS10WLED865SSYMBOPC / Bajaj - BIBWP10WLED/ Orient - LIBHP-10-C |
| 109 | M&L for supply, laying and testing XLPE cable, Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 2 core, in repair complete all as specified and directed. |
| 110 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and as directed. |
| 111 | M&L for supply and laying sand cushioning with local dry and clean sand over and under the cable for protection of cable , 80 mm thick before laying the cable and after laying the cable complete all as specified and directed. Note:- Only punned thickness of 180mm shall be measured for payment. |
| 112 | Returning filling in excavated material including spreading, levelling, watering and well ramming in layer n.exc 25 cm thick complete all as specified and directed. |
| 113 | Removal of excavated material (soil) to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 114 | M&L for supply and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250mm x 150mm x 40mm, ISI marked, M-35 grade complete all as specified and directed. |
| 115 | S&F in repair 50mm dia GI pipe 'Light' grade with all fitting for cable protection passing under road/floor or for fixed to wall complete all as specified and directed. |
| 116 | S&F Garden light of 10W having IP 65 Rating including of all mounting and acessaries required for proper fixing complete all as specified and directed.Make:- Havells Cat Part No MOUNTBL10WLED830PSYMTOPMMA or equivalent make in Bajaj / Philips |
| 117 | M&L for Earthing with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers, provision of 40mm GI pipe light grade as watering pipe with funnel and wire mess, 20mm GI pipe light grade as earth lead (GI wire) protection pipe, RCC test chamber with cover, filling charcoal and salt in 15mm thick alternative layer starting from charcoal bottom layer to ensure packed thickness not less than 15 Cm on all sides of earth plate complete all as shown in electric plate no 3, connected to earthing test point including required earth work (excavation, returning filling and removal of surplus excavated soil) and testing on completion complete all as specified, shown/indicated on Drg and as directed by Engg-in-charge. |
| 118 | M&L for GI tubing 25 mm bore medium grade with all fittings laid in tranches complete all as specified and directed |
| 119 | Taking down main switch, DB/Change over/VTPN, AC box from wall/ wooden board etc , any description and any capacity with MCB(s) / MCCB(s) including disconnection of electric connections complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender