Tender For Repair & Replacement Of Joinery, Flooring, Brick Work, Plastering, Tiling, Plumbing, And Sanitary Fittings And Misc B/R Works At Mgs Enclave & Hq Sub Area Offrs Mess Complex In Zone-Iii Area Under Ge(S) Jaipur At Mil Stn Jaipur
Tender Value
30 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
17 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Replacement Of Joinery, Flooring, Brick Work, Plastering, Tiling, Plumbing, And Sanitary Fittings And Misc B/R Works At Mgs Enclave & Hq Sub Area Offrs Mess Complex In Zone-Iii Area Under Ge(S) Jaipur At Mil Stn Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | M&L Post Construction ATT of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 2 | M&L Post Construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 3 | M&L brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 4 | M&L brick work using old size bricks with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 5 | M&L for cutting holes in stone wall not exc half brick built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. |
| 6 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or any horizontal portion and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed. |
| 7 | S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face are covered with decorative face veneer with lipping / frame to match complete all as specified and directed. |
| 8 | Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 9 | Taking down chowkats or frames exc. 1.5 sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 10 | M&L second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 11 | S&F second class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. |
| 12 | S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 13 | Taking down shutters of any description not exc 1.00 Sqm each complete all as specified and directed. |
| 14 | Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each complete all as specified and directed. |
| 15 | S&F for solid PVC door frame of size 50 x 47 mm made out of 5 mm wood grain printed PVC sheet used reinforced with MS square tube & edges will be painted to match with printed sheet, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified and directed |
| 16 | S&F Factory made Solid PVC Moulded door shutter with Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded Prelam PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 17 | S&F factory made uPVC any colour sliding window, three track made of extruded profiles with wall thickness of 2.3mm (± 0.2mm), window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ±0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, for area not exceeding 2.00 sqm each complete as specified and directed.Note : (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured for payment purpose. |
| 18 | M&L in repair for 18 mm thick WPC (Wood Polymer Composite) panel with suitable pins, screws and adhessive in cabinets body, shutters and shelves etc. complete all as specified and directed. |
| 19 | S&F 20 mm dia stainless steel, silver & chrome finish, fancy type, anti-rust curtain rod with curtain bracket , finials fixed by screw in wall complete as all specified and directed. |
| 20 | S&F 8 mm thick (Both side white lamination solid PVC board with cement solvent adhesive for in back of kitchen cabinet/partition of cupboard etc complete all as specified and directed. |
| 21 | S&F brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 150 mm long complete all as specified and directed. |
| 22 | S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 23 | S&F brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed of 300 mm length of bolt complete all as specified and directed. |
| 24 | S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt complete all as specified and directed. |
| 25 | S&F butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed. |
| 26 | S&F brass handle of 100mm size, cast type, polished bright complete all as specified and as directed. |
| 27 | S&F aluminium handles cast type anodised of 125 mm size complete all as specified and directed. |
| 28 | S&F in repair extruded aluminium alloy handles fabricated type anodised of 100 mm size complete all as specified and directed. |
| 29 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed. |
| 30 | S&F door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (extruded section) body complete all as specified and directed. |
| 31 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 32 | M&L for roller blind curtain (semi blackout) for windows roll-up shades light filtering sun and UV protection polyester curtains with plastic cord/chain, brackets fixed with screws complete all as specified and directed. |
| 33 | M&L for auto close hinges, stainless steel, bright finish or electrogalvanised fixed complete all as specified and as directed. |
| 34 | S&F mild steel framed work for windows grills such as grills, ladders, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors / window and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed. |
| 35 | S&F rolled mild steel section as in joist, channel, angle or tee sections fixed independently, without connecting plates etc (cut to ordinary length i.e within 20 mm of the length indicated) of grade Fe 410-W (Gde E-250) quality 'A' complete all as specified and directed. |
| 36 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 37 | S&F pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed. |
| 38 | S&F pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed. |
| 39 | M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 40 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note:- Glass and other filling material in panels shall be measured and paid seperately. |
| 41 | S&F for powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note : Glass and other filling material in panels shall be measured and paid seperately. |
| 42 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. |
| 43 | M&L in repair anodised aluminium snap grid frame work (size of grid 605 x 605mm) for false ceiling complete all as specified and directed. |
| 44 | S&F Hangers (Size of grid 605 x 605mm) 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 45 | Taking down existing aluminium window/UPVC window single leaf of area n.exc 1.5 sqm including taking down all members, sheet glass of any thickness, cleat, neoprene rubber beading and resecuring / refixing all section & tightening all joints including fixing new small cleats of suitable size, fixing L-type cleats of stainless steel to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat and new neoprene rubber beading and making the door shutter serviceable, including fixing the shutter on hinges complete all as specified and directed. |
| 46 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 47 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 48 | M&L for providing and fixing PVC laminated Expanded Polystyrene (EPS) false ceiling panels of size 595 x 595 mm, consisting of 1.0 mm thick coloured/plain rigid PVC sheet factory laminated to EPS core of 20 mm thickness (overall thickness 21 mm), laid in exposed 15 mm designer T-grid suspension system (15 mm flange with 8 mm return), includinng GI wall angle, main tees, cross tees, 6 mm dia GI hanger rods with approved fasteners, all necessary fittings and accessories, suspended from existing RCC roof/stone slab/steel structural members as per manufacturer's speficications complete all as specified and directed. |
| 49 | M&L for metal frame ceilling with 12 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and directed.Note :- The frame work for ceiling shall be measured and paid separately. |
| 50 | M&L for machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing on treads of step and landing of stair including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. |
| 51 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub-floors, sub-bases, floors and paving, etc. complete all as specified and directed. |
| 52 | M&L for glazed ceramic glossy coloured tiles in vertical surface 350x 250x 7 mm / 450X 350X 7 mm / 300x 600x7 mm / 450x 300x7 mm / 1200 x 600x7 mm thick, set and jointed in neat cement slurry / adhesive and pointed in white or coloured grouting / cement to match surface of tiles over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed. |
| 53 | M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 54 | M&L for vitrified Ceramic tiles light shade cut out of 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 55 | M&L for vitrified Ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and directed. |
| 56 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 57 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 58 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement with and including integral water proofing compound at rate of 03% by weight of cement or as per manufacturer specification complete all as specified and directed. |
| 59 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement with and including integral water proofing compound at rate of 03% by weight of cement or as per manufacturer specification complete all as specified and directed. |
| 60 | M&L for preparation of new surface of wall of any description and applying two coats of oil bound distemper (OBD) over and including 1 mm thick wall putty all as specified and directed. |
| 61 | M&L for preparation of new surface of walls of any description with a coat of 1 mm thick wall putty and applying two coats of acrylic emulsion exterior grade weather proof paint over a coat of primer complete all as specified and directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17 of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work. |
| 62 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 63 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 64 | M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 65 | M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 66 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 67 | S&F of CPVC pipes of 16 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 68 | S&F of CPVC pipes of 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 69 | S&F snow white colour vitreous china, rimless Wall Hung WC with UF Soft Close Seat Cover, Hinges, Accessories Set, Single Piece Slim concealed cistern with floor mounten frame, installation kit with twin flush control plate including fixing as per manufacturer instructions complete all as specified and as directed. Make : Roca CAT Part No RS34668900C / Kohler CAT Part No SKU: K-20217IN-S-0 or equivalent make as approved by GE. |
| 70 | S&F in repair for 15mm bore dia of pipe brass CP, single lever wash hand basin mixer for mixing hot & cold water screwed down for iron pipe including all accessories complete all as specified and directed. |
| 71 | S&F in repair brass chromium plated overhead shower rose of 250 X 250 mm size, square / round shape, with revolving / swivel joint complete all as specified and directed. |
| 72 | S&F in repair Stainless Steel Towel Rack 600mm Long complete all as specified and directed. |
| 73 | M&L in repair for Tumbler Holder for bathroom complete all as specified and directed. |
| 74 | M&L in repair for table top / under counter wash basins, of size 700 x 435 x 135mm, Oval Shape, Vitreous China, white, flat back, excluding taps, waste, chain and plug and porcelain stopper but including PVC waste pipe minimum 600 mm long suitable for 32 / 40 mm dia of outlet complete all as specified and directed. |
| 75 | S&F in repair wash hand basin vitreous china white of size 800x475 mm with cabinet (Vanity) and including all fitting bottle trap complete all as specified and as directed. |
| 76 | Dismantling water tanks of any description, capacity exc 500 and not exc 1000 litres and removing from site complete all as specified and directed. |
| 77 | S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position complete all as specified and directed |
| 78 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 79 | S&F PVC (SWR) bends any radius of 110 mm bore without access door complete all as specified and directed. |
| 80 | Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed. |
| 81 | Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed. |
| 82 | S&F in repair for 15mm bore dia of pipe pillar taps cast copper alloy, with capstan head chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 83 | S&F ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20 mm bore dia of pipe complete all as specified and directed. |
| 84 | S&F in repair soap dish, any type fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 85 | S&F in repair white rimless single piece EWC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings, S trap including fixing as per manufacturer instructions complete all as specified and as directed. Make : Kholer CAT part No. 77739T-SL-0 / Grohe Cat Part No. 39675000 / Roca CAT Part No. RS34273700H or equivalent make as approved by GE. |
| 86 | S&F in repair bib taps 2-in-1 cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type of 15 mm bore dia of pipe complete all as specified and directed. Make : Kohler CAT Part No 25432IN-4-CP / Grohe CAT Part No 20281000 or equivalent as approved by GE. |
| 87 | S&F kitchen plain basket of stainless steel size size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. |
| 88 | S&F in repair angle stop valve, fancy type chromium plated cast copper alloy, for 15 mm bore dia of pipe screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 89 | S&F in repair bib taps cast copper alloy with crutch or butterfly handle, long body, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed. Make : Kohler CAT Part No 16093IN-4-AF / Grohe CAT Part No 20237001 or equivalent make as approved by GE. |
| 90 | S&F in repair kitchen cup & saucer basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. |
| 91 | S&F in repair baskets guide channel of stainless steel suitable for running basket of grade SS-304, 50cm long and 30 to 40mm width including drilling over stone complete all as specified and directed. |
| 92 | S&F in repair kitchen cutlery & spoon basket (plain) of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. |
| 93 | S&F in repair LED light looking mirror 5.0 mm thick of selected quality glass, square / rectangular shape of 1200 x 800 mm size, bevelled edge, highly resilience with great shine, warm white colour with smart motion sensor switch that turn on / glow the light as soon as one approches the mirror and including fixing glass on wall with brass screw and cup washers complete all as specified and directed. |
| 94 | S&F in repair health faucet (hand shower) chromium plated suitable for 15 mm dia pipe with 1.2 metre long flexible tube with non return valve and wall hook including making connections and fixed in position complete all as specified and directed.Make : Kholer CAT Part No K-12927IN-CP / Roca CAT Part No RF9060A1 or equivalent make as approved by GE. |
| 95 | S&F in repair hand shower round shape of 105mm dia, ABS (Acrylonitrile Butadiene Styrene) body with a chrome-plated finish, a face plate, multi-flow functionality, equipped with a cascade effect, with cleaning system for easy cleaning and including 1.5m long flexible chrome tube complete all as specified and directed. |
| 96 | S&F in repair float corner glass shelve 8 mm thick 250 mm radius complete all as specified and directed. |
| 97 | S&F in repair for 15mm bore, Single Lever Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) and including screwed down for iron pipe or for union along with spout complete all as specified and directed.Make:- Cera Cat Part No. F1019411 / Kohler cat Part No. K-98754IN-4-CP or equivalent as approved by GE. |
| 98 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 99 | Demolition of stone slabs and tiles of any description or thickness, laid bedded and pointed in any mortar in floor, apron etc complete all as specified and directed. |
| 100 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 101 | Dismantling of plain or corrugated steel sheeting of any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 102 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs/ blankets any thickness including cover fillets complete all as specified and directed. |
| 103 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortar for 100 mm internal dia of pipe complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender