Tender For Special Repair To Bldg No P-200 (Except Dining Hall) Under Age B/R-I At Brichgunj Mil Stn, Sri Vijaya Puram
Tender Value
1.43 Crore
Estimated cost
Bid Submission
30 Sep 2026
14 days left
EMD
2.19 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-200 (Except Dining Hall) Under Age B/R-I At Brichgunj Mil Stn, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutters area n.exc 1.5 Sqm each (without taking of shutter from frame) including cutting holes to facilitate the taking down etc complete all as specified and directed by Engr-in-Charge. |
| 2 | Taking down chowkats or frame with shutters area exc 1.5 Sqm and n. exc 4 Sqm each (without taking of shutter from frame) including cutting holes to facilitate the taking down etc complete all as specified and directed by Engr-in-Charge. |
| 3 | Providing and fixing factory made uPVC Frames (60mm x 58mm) white colour casement window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, complete all as specified and directed by Engr-in-Charge, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) |
| 4 | Providing and fixing factory made uPVC Frames (88mm x 52mm) white colour sliding window/door three track, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, complete all as specified and directed by Engr-in-Charge, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) |
| 5 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle (02 Nos), tower bolts (02 Nos), sliding bolt (01 No), Hinges (03 Nos) made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 6 | Providing and fixing factory made uPVC white colour fixed window area n.exc. 1.00 Sqm each made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass, complete all as specified and directed by Engr-in-Charge.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) |
| 7 | All as per item No 6 above but area exc. 1.00 sqm but n.exc 2.00 sqm each |
| 8 | All as per item No 6 above but area exc. 2.00 sqm each |
| 9 | Providing and fixing factory made uPVC white colour sliding window Three track (area n.exc 2sqm each) made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, complete all as specified and directed by Engr-in-Charge. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 10 | S&F powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge |
| 11 | S&F powder coated anodised aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engr-in-Charge |
| 12 | S&F 4.8mm thick sheet glass, selected quality, in squares exc. 0.5 sq. m each pane, complete all as specified and directed by Engr-in-Charge. |
| 13 | S&F stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F 10mm thick toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required etc complete all as specified and directed by Engr-in-Charge. |
| 15 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F aluminium composite panel sheet of 3 to 4 mm thick as in wall cladding & false ceiling with and including aluminium frame work with plastic strips (double sided sticker) of suitable size of varying thickness of 10mm to 30 mm , applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant, The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F PVC fluted exterior & interior louvers of with and incl the cost of aluminium section 25mmx25mmx1.2mm, aluminium angle cleat 19mmx19mmx2mm & screw locking etc. The PVC fluted panels are interlockable. Louvers should be of size 2900mmx150mm x25mm with wall thickness of 4mm with exterior coating warranty of 10 years. The cost includes aluminium framework and all necessary fixtures & fittings etc complete all as specifed and directed by Engr-in-Charge. |
| 18 | S&F Gl frame work of grid size 605x605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with and including hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F 10mm PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing etc complete all as specified and directed by Engr-in-Charge. |
| 20 | Dismantling floor, hearth or wall tiling of any description, size and thickness including cement mortor bedding (but not backing), removing rubbish off the premises etc complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for Virified Ceramic coloured tiles light shade matt finish 10 mm thick (square/ rectangular) polished, size of each tiles 600 x 600 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge. |
| 22 | All as per item No. 21 above but in vertical surfaces such as skirting & dado, laid over and including 10mm thick rendering in CM 1:4. |
| 23 | M&L for Vitrified Ceramic coloured tiles light shade 10 mm thick (square/ rectangular) polished, size of each tiles 1200 x 600 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge. |
| 24 | All as per item No. 23 above but in vertical surfaces such as skirting & dado, laid over and including 10mm thick rendering in CM 1:4. |
| 25 | M&L for glazed ceramic coloured tiles glossy finish on vertical surface 300x 450X 7-8mm thick with and including 10mm thick CM 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for Endura Heavy duty Vitrified tiles of size 300x300x10 to 12mm thick or high dimension (except thickness) of any colour any design (approved by GE) durastone weather proof impact resistant, abrasion resistant, slip resistant exterior tiles as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed by Engineer-in-Charge. |
| 27 | M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes etc complete all as specified and directed by Engr-in-Charge. |
| 28 | Dismantling of stone slabs and tiles of any description or thick ness in floors aprons etc laid bedded and pointed in any mortar etc complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for Granite (of any type) work 18-20mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, window cills, cooking platforms, and like with and incl 15mm thick bedding in CM 1:6 & pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and directed by Engr-in-Charge. |
| 30 | M&L for Granite (of any type) work 18-20mm thick (table rubbed and polished) for wall lining (veneering to wall) 10mm thick in CM 1:3 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed by Engr-in-Charge. |
| 31 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for etc complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and directed by Engr-in-Charge. |
| 33 | Dismantling plain or corrugated steel sheeting any gauge, thickness, in roof coverings etc complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cranking to shape as specified and fixed with self tapping screws etc complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cranking to shape as specified and fixed with self tapping screws etc complete all as specified and directed by Engr-in-Charge. |
| 36 | S&F 0.56mm Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) etc complete all as specified and directed by Engr-in-Charge. |
| 37 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L for mild steel work tubular pipes as in posts/truss/purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 etc complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F Mild steel Fe 410-W (Grade E-250 quality A) plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment and fixed by riveting or welding or with and including nuts and bolts etc complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F MS work as in wind ties for roof including securing bolts etc complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L for providing & fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with and including necessary stainless steel nuts & bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engr-in-Charge. |
| 42 | M&L for preparation of new steel or iron surfaces of any description, width or girth, not otherwise described for and applying two coats of Epoxy anti-corrosive paint etc complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F in repairs aluminium (extruded section) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engr-in-Charge. |
| 44 | Demolition of Precast Concrete Block work built in Cement Mortar including all quoins arches pillars etc complete all as specified and directed by Engr-in-Charge. |
| 45 | M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:4) complete all as specified and directed by Engr-in-Charge. |
| 46 | Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. |
| 47 | M&L for 10mm thick rendering in CM 1:6 on wall of brick/ concrete surfaces, finished even and smooth without using extra cement etc complete all as specified and directed by Engr-in-Charge. |
| 48 | M&L for 15mm thick rendering on brick/ concrete surfaces in two layers of 5mm thk in CM 1:4 including WPC @ 3% by weight of cement over a coat of 10 mm thk in CM 1:6 finsihed the surfaces even and smooth without using extra cement etc complete all as specified and directed.Note:- WPC shall be measured and paid seperately. |
| 49 | Supply only integral water proof compound |
| 50 | M&L for application of high build polymer cement sand mortar 1:2.5 with water cement ratio 0.35 to 0.45 mixing with Nito bond SBR @ 5ltrs/50Kg cement on wall/ column/ ceiling/ chajja surfaces 10 to 20mm thick in two layers over slurry priming coat of 1 volume Nito bond SBR to 1 volume water, 3 volume fresh cement (5 sqm/ litre Nito Bond SBR) etc all as per manufacturers instructions, including painting/finishing to match with the existing complete all as specified and directed by Engr-in-Charge. Note: Nitobond SBR shall from Fosroc chemical (India) Pvt Ltd or substantially equivalent. |
| 51 | M&L for preparing newly plastered wall surfaces and applying two coats of plastic emulsion over a coat of alkali resistant primer over a coat of 1mm thick putty etc complete all as specified and directed by Engr-in-Charge. |
| 52 | M&L for complete removal of existing treatment on wall surfaces and applying two coats of plastic emulsion over a coat of resistant primer over a coat of 1mm thick putty etc complete all as specified and directed by Engr-in-Charge. |
| 53 | All as per item No 52 above but on ceilings surfaces |
| 54 | M&L for preparation of newly plastered surfaces of wall and applying two coat of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer over a coat of 1mm thick putty etc complete all as specified and directed by Engr-in-Charge. |
| 55 | M&L for preparation of old surfaces of wall and applying one coat of weather proof exterior acrylic emulsion paint with anti fungal property etc complete all as specified and directed by Engr-in-Charge. |
| 56 | S&F 16.75mm thick HDF Board fixed with screws, solvent cement/ adhesive to make kitchen cabinet etc complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F 12 mm thick HDF Board fixed with screws, solvent cement/ adhesive to make kitchen cabinet etc complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F 1.25 mm thick Acrylic sheet interior grade fixed with screws, solvent cement/ adhesive to make kitchen cabinet covering etc complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F auto closing hinges openable at 0 degree for kitchen cabinet shutters etc complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F auto closing hinges openable at 8 degree for kitchen cabinet shutters etc complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F Profile handles as per cabinet size for kitchen cabinet etc complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F Tandem basket pull out type of depth 100mm (size 430/530 x 500) with necessary fixing clips etc. complete in all as specified and as directed by Engineer‐ in-charge. |
| 63 | All as per item No 62 above but 150mm depth |
| 64 | All as per item No 62 above but 200mm depth |
| 65 | Taking down eaves gutter and rain water pipes (of any size and pattern), incl all fittings, heads, shoes, bends, swan-necks, etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F 110mm bore PVC (SWR) pipes single socketed in any length, with rubber joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 67 | All as per item No. 66 above but fixed to walls |
| 68 | S&F 75mm bore PVC (SWR) pipes single socketed in any length, with rubber joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 69 | All as per item No. 68 above but fixed to walls |
| 70 | S&F 75mm dia outlet PVC (SWR) floor trap, plain with SS grating incl joining with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F PVC (SWR) 110mm dia bend of any radius. |
| 72 | S&F PVC (SWR) 110mm dia double T equal or unequal at Junctions of any radius. |
| 73 | S&F PVC (SWR) 75mm dia bend of any radius. |
| 74 | S&F PVC (SWR) 75mm dia double T equal or unequal at Junctions of any radius. |
| 75 | S&F 100 mm PVC Floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4). |
| 76 | S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia pipe etc complete all as specified and directed by Engr-in-Charge |
| 77 | Taking up or down 20mm dia GI tubing and connections including cleaning for refixing or removing to store complete all as specified and directed by Engr-in-Charge. |
| 78 | All as per item No. 77 above but 25 mm dia . |
| 79 | All as per item No. 77 above but 40 mm dia . |
| 80 | S&F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge. |
| 81 | All as per item No. 80 above but 25 mm dia |
| 82 | All as per item No. 80 above but 40 mm dia |
| 83 | S&F in repair vitreous china CASCADE type WC single piece-WC with UF Soft close slim seat Cover, hinges, fixing accessories set, dual flush cistern fittings complete of size 655 x 360 x 765mm, P trap-180mm in approved colour complete all as specified and directed by Engr-in-Charge. |
| 84 | S&F in repair wash hand Basin of size 500x415x200 mm including all connecting fittings and brackets etc complete complete all as specified and directed by Engr-in-Charge. |
| 85 | S&F in repair Vitreous China urinals with spreader hole and fixing accessories of Size 480 x 300 x 740 mm etc complete all as specified and directed by Engr-in-Charge. |
| 86 | S&F in repair curved shaped urinal partition with frosted glass 8mm thk chrome finish of size 450 x 900 mm including all connecting fittings etc complete all as specified and directed by Engr-in-Charge. |
| 87 | S&F in repair bathroom mirror 630x445mm rectangular shape of Kubix prime range Jaquar Cat Part No AKP-CHR-35795 or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge. |
| 88 | S&F in repair chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook, complete all as specified and directed by Engr-in-Charge. |
| 89 | S&F in repair Toilet paper holder,with flap type fixed to wall with CP brass screws. |
| 90 | S&F in repair CP two way bib cock of Make Jaquar Cat Part No ARI-CHR-39041 or substantially equivalent equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge. |
| 91 | S&F in repair glass corner shelf, Cat Part No.ACN-CHR-1173 of Jaquar or substantially equivalent equivalent in Cera/Hindware etc complete all as specified and directed by Engr-in-Charge. |
| 92 | S&F in repair stainless steel towel rail 600mm long, 20mm dia, D type, between flanges including suitable bracket complete all as specified and directed by Engr-in-Charge. |
| 93 | S&F in repair chromium plated square towel ring etc complete all as specified and directed by Engr-in-Charge. |
| 94 | S&F in repair 15mm dia angle cock cast copper alloy with capstan head, chromium Plated, screwed down high pressure with crutch or butterfly handle for iron pipe etc complete all as specified and directed by Engr-in-Charge. |
| 95 | S&F in repair metropole flush valve regular 32 mm size (concealed body) with exposed shut off Provision and Round Flange for urinal etc complete all as specified and directed by Engr-in-Charge. |
| 96 | S&F in repair connection pipe 15mm size with CP brass Nuts of length 600mm . |
| 97 | S&F in repair 32mm bore brass CP bottle trap for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and complete all as specified and directed by Engr-in-Charge. |
| 98 | S&F in repair 15mm Pillar cock chromium plated cast copper alloy, fancy type with cruttch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and complete all as specified and directed by Engr-in-Charge. |
| 99 | S&F in repair shower arm 190mm long light body with wall flange and exclusive shower single flow with revolving ball joint etc complete all as specified and directed by Engr-in-Charge. |
| 100 | S&F in repair Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-Charge. |
| 101 | S&F in repair soap dispenser with glass bottle etc complete all as specified and directed by Engr-in-Charge. |
| 102 | S&F in repair 15mm Bib taps chromium, plated cast copper alloy, fancy type with cruttch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and complete all as specified and directed by Engr-in-Charge. |
| 103 | S&F in repair waste coupling 32mm size full thread with 80mm height etc complete all as specified and directed by Engr-in-Charge. |
| 104 | Taking down carefully, copper/aluminium point wiring (Light, fan, scoket or power) complete, including fittings and fixtures such as switches, ceiling roses, regulators, sockets etc., and making good disturbed surfaces of walls floors, etc., complete all as specified and as directed by Engineer-in-Charge. |
| 105 | M & L for point wiring with PVC insulated FRLS 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn through in and including 19 mm thick rigid non metallic PVC conduit medium quality with all accessories, fittings, PVC junction boxes etc, with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes suitable for modular fittings, concealed in wall for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws and making good the disturbed surface all as specified complete all as specified and directed by Engr-in-Charge. |
| 106 | All as per item No. 105 here - in - before but for one fan point controlled by one 5 Amps switch with 1.5 sq mm copper conductor cable. |
| 107 | All as per item No. 105 here - in - before but for 3 pin 5 Amps switch socket combination on independent board. |
| 108 | All as per item No. 105 here - in - before but for 5 Amps socket point on the same board controlled by one switch. |
| 109 | All as per item at sl No. 105 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amps independent, with cable 2.5 Sqmm size and 2.5 Sqmm earth continuty conductor, complete all as specified and adirected by Engineer-in-Charge. |
| 110 | Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and directed by Engineer-in-Charge. |
| 111 | Supply and fixing Modular switch 1 way 5 A, 1 module complete all as specified and directed by Engr-in-Charge. |
| 112 | Supply and fixing Modular switch 1 way 15 A, 1 module all as specified and directed. |
| 113 | Supply and fixing modular socket outlet, 2/3 pin combined , 6/16 Amps, combined 2 module, 230 volts all as specified and directed. |
| 114 | Supply and fixing modular socket outlet, 2/3 pin combined , 6 Amps, combined 2 module, 230 volts all as specified and directed. |
| 115 | S & F modular white cover plate with frame, 3 module complete all as specified and directed by Engr-in-Charge. |
| 116 | S & F modular white cover plate with frame, 6 module complete all as specified and directed by Engr-in-Charge. |
| 117 | S & F modular white cover plate with frame, 8 module complete all as specified and directed by Engr-in-Charge. |
| 118 | Supply and fix in repair metal enclosure distribution board SPN, 12 way 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and directed by Engineer-in-ChargeNote:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc... |
| 119 | Supply and fix in repair metal enclosure distribution board SPN, 4 way 240 volts, with 100 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs complete all as as specified and directed by Engineer-in-Charge |
| 120 | Supply and fix in repair MCB single pole 240 volts, 6 to 32 amps, B series complete all as specified and directed by Engineer-in-Charge |
| 121 | Supply and fix single pole and netural 240 Volts 32 amps complete all as specified and directed by Engineer-in-Charge |
| 122 | S & F in repairs Single Pole and Neutral Enclosure with Two Pin Earth Plug and Socket complete with one MCB, SP, 20 Amps, 240 Volts fixed on flat iron 32x6 mm or 2nd class hard wood wooden board complete all specified and as directed. |
| 123 | Material & labour, earthing complete with galvanized steel earth plate electrode 60 cms x 60 cms x6.00mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4.0mm by means of bolts ,nuts ,check nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron or steel pipe light grade 40 mm bore and water pipe 20 mm bore GI light grade (ISI marked ) with funnel and wire mesh ,including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No, 5 of MES Sch Part-1 (2009), complete all as specified and directed by Engr-in-Charge. |
| 124 | Supply and fix in repair aluminium housing LED bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 125 | Supply and fix recess mounted LED 18 w Round type downlighter with die cast aluminium housing coating prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and directed by Engineer-in-Charge. |
| 126 | Supply and fix surface mounted LED 12 w Round type downlighter with die cast aluminium housing coating prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all specified and directed by Engineer-in-Charge. |
| 127 | Supply and fix aluminium rectangular conciled profile channel of size 35 x 20 mm with diffused cover, end caps and mounting clips for LED strip lights complete all as specified and directed by Engr-in-Charge. |
| 128 | S & F LED Cove lighting ( Each Cove lighting Lenth 5 mtr)provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable cove light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge. |
| 129 | S & F LED wall light , triangular 9 w provided with high output diffuser including high efficiency electronic driver complete with LED lamp, IP 65, prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, complete all as specified and directed by Engineer-in-Charge. |
| 130 | S & F LED surface mounted LED light 3W housing in Die cast aluminium with anthracite finish diffuser including high efficiency electronic driver complete with LED lamp, IP 65, metal body prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, complete all as specified and directed by Engineer-in-Charge. |
| 131 | Supply and fix air ventilation light weight metal body electric driven AC I Ø, 225mm sweep with louvers including grouting and making whole in wall and taking down of unserviceable item complete all as specified and directed by Engr-in-Charge. |
| 132 | Supply and fix air circulating device electric driven I Ø, 400/450mm sweep oscillating type, high quality ABS base with high speed motor and balanced blades and three leafed with 3 core copper cable of suitable size, complete and taking down of unserviceable item complete all as specified and directed by Engr-in-Charge. |
| 133 | M & L in repairs for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 4 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre. |
| 134 | All as per item Sr No 133.00 but of size 6 sqmm complete all as specified and directed by Engr-in-Charge. |
| 135 | All as per item Sr No 133.00 but of size 1.5 sqmm complete all as specified and directed by Engr-in-Charge. |
| 136 | M & L in repairs for sub main wiring complete with four runs of 10 Sqmm FRLS single core PVC insulated single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 10 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and directed by Engineer-in-Charge. Note : (1) Three runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender