Tender For Comprehensive Maintenance & Periodical Services To Various Bldgs Of Md & Otm Accn At Solan Mil Stn Under Ge Kasauli.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Sep 2026
14 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance & Periodical Services To Various Bldgs Of Md & Otm Accn At Solan Mil Stn Under Ge Kasauli.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Section - I |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters) not exceeding 1.5 sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters) exceeding 1.5sq.m and not exc 4.00sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge. |
| 4 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing at site as equired complete all as specified & directed by Engineer-in-Charge. |
| 5 | Taking down shutters of any description n. exc 1 sqm from chowkhat and removing at site as equired complete all as specified & directed by Engineer-in-Charge. |
| 6 | Supply and fix 125 x 60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc complete all as specified . |
| 7 | Supply and fix 105x60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc complete all as specified . |
| 8 | Material & Labour for 2nd class hard wood as in plain, solid, straight chawkhats and frames, wrought framed rebated on the solid, rounded or chamfered , put to gather with glue pinned at joints complete all as specified & directed by Engineer-in-Charge. |
| 9 | Supply and fix Flush shutters 30 to 35mm thick for door shutter, solid core construction, with block board core and plywood face panels, commercial type on both side. |
| 10 | Supply and fix 2nd class hard wood 35mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of door shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 11 | Supply and fix 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of window shutters as specified in SSR Part-1, complete all as specified and directed. . |
| 12 | Supply and fix factory made Solid PVC door frame of size 50 mmx 47 mm made out of 5mm wood grain printed PVC sheet reinforce with M.S square tube as per specification complete all as specified and directed by Engr-in-charge. |
| 13 | Supply and fix factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvetn cement supplying and fixing in the frame at site as per specification and as per drawing complete all as specified. |
| 14 | Supply and fix Factory made box type steel window with side hung shutters (glazing) with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars, including flat iron 50 x 6 mm for cover gaps and flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.Note : Glass/Wire mesh required for fixing in window will be measured and paid for separately. |
| 15 | -Ditto-as item no 13.00 but Gauged shutter without glazing bars. |
| 16 | Supply and fix Factory made box type steel section ventilator with top/centre hung shutter double leaf shutter for glazing and wire gauze with pintle hinges & 01 No 150mm mild steel tower bolt, hinges, steel peg stay, steel handle to each shutter, steel handle dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. Note : Glass/Wire mesh required for fixing in ventilator will be measured and paid for separately. |
| 17 | Supply and fix anodised aluminium frame of powder coating of 50 micron thickness for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified |
| 18 | Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified. |
| 19 | Supply and fix powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 20 | Supply and fix Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. |
| 21 | Supply and fixing for brass mortice lock, vertical type, 4 levers, size 100 mm, as in repairs, all as specified and directed |
| 22 | Supply and fixing for 9 mm thick Pre laminated interior grade both side laminated board in repairs, complete all as specified |
| 23 | Material & Labour for Plain Cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed. |
| 24 | Supply and fix in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.40mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. |
| 26 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.50 sqm complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Supply and fix 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil puty (or beading, any type) in squares n.exc. 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge. |
| 28 | All as per serial item No - 26.00 here in before but 4 mm thick in squares exc.0.5 sqm in each pane-ditto- |
| 29 | Supply and fix Figured glass thickness 4 mm, pin hea type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 30 | Supply and fix 300 mm size MS door spring including roller and roller plate by means of welding complete all as directed by Engineer-in-Charge |
| 31 | ditto as Item No. 29.00 above but in repairs |
| 32 | Supply and fix Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, complete all as specified & directed. |
| 33 | Supply and fix Mild steel butt hinges medium weight, cold rolled, 75mm, ISI marked, complete all as specified and directed . |
| 34 | Supply and fix barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed. |
| 35 | Supply and fix barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed. |
| 36 | Supply and fix barrel tower bolts aluminium anodised extruded section of size 100 mm complete all as specified & directed. |
| 37 | Supply and fix aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed. |
| 38 | Supply and fix aluminium fabricated type extruded handles of size 125 mm complete all as specified & directed. |
| 39 | Supply and fix 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts, fixed on plate or staple plate complete all as specified & directed. |
| 40 | ditto as Item No. 38.00 above but in repairs |
| 41 | Supply and fix double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified |
| 42 | Ditto as per Item No. 40.00 above but fixed in repair. |
| 43 | Door seal strip with plastic beading, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 44 | Material & Labour for preparing new surfaces of wood or wood based material exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer. |
| 45 | Material & Labour for preparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 46 | Material & Labour for Welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as gates, grills, doors, windows etc., complete all as specified and as directed. |
| 47 | Supply and fix Stainless steel 20 mm dia curtain rod, bright finish, including set of fixing brackets (wall & end), fixed to wall in repairs, with finols/finnels, connected accessaries, rubber packing, required screws and rawal plugs, complete all as specified and directed. |
| 48 | Supply and fix in repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 all as specified. |
| 49 | Supply and fix in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 50 | Material & Labour for Block boards thickness of 18/19mm, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work with screws as in walls panelling, almirah, kitchen cabinates etc, fixed in repair, complete all as specified and directed by Engineer-in-charge. |
| 51 | Material & Labour for Decorative laminate 0.9 mm thick type 1 of surface finish , colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as spd & direcetd by Engr-in-charge. |
| 52 | Material & Labour for external teak wood lipping (decorative), 6mm thick of block board or veneered particle board/MDF fixed with nails complete all as specified and directed by Engineer-in-Charge. |
| 53 | Material & labour piano hings, mild steel bright finish width of flap 30mm fixed in repair including taking out the existing complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and fix magnetic catches 75mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply and fix 40mm dia cupboard knob of brass, polished, fixed with nut screw and washer, fixed as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 56 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 57 | Material & Labour for framed work such as grills, gratings, etc with ends of bars sholderedcand /or riveted or forged into spikes, framed guard bars,barred iron dooes,ladders, framed balustereds, walk ways railing frameworks of water tank and similar works all as specified and as directed. |
| 58 | Material & Labour for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc; wind ties for roof including securing bolts; purlin/ rafter of roof sheet; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165. |
| 59 | Dismantling plain or corrugated steel sheeting any guage thickness incl Nainital pattern as in roof covering complete all as specified. |
| 60 | Supply and fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required. |
| 61 | Same as item No 59.00 above but plain steel sheet as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape, cut to designed shape (Jhhallar) etc all as specified. |
| 62 | Same as item No 59.00 above but except sheeting all as specified. |
| 63 | Supply and fix aluminium flat sections as in wind tie. |
| 64 | Dismantling timber scantling 40 sq.cm and over in section in any position in framed work etc complete all as specified. |
| 65 | Supply and fix for second class hard-wood(Hollock), timber fixed and clean sawn, in scantlings in any position complete all as specified |
| 66 | Dismantling walls or ceiling boards (fibre,plup insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and as directed by Engr-In- Charge. |
| 67 | Material & Labour for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design ( Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, and Dismantling wall and ceiling board (fibre, pulp , insulation etc) or insulation boards/ slabs any thickness all complete at all heights as per directions of EIC. |
| 68 | Supply and fix in repair GI metal suspended ceiling system OREO GI lay in plain of make DEXUNE / HUNTERDOUGLS / LINDER 600 x 600x 0.5mm (TEGULAR) Edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. the tiles should have humidity resistance of 100% with light reflection of 62%Note: (i) To comprise main runner spaced at 1200mm centres securly fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer tahn 600mm require independant support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres(ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire. |
| 69 | Supply and fix bib cock long neck with flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 70 | Supply and fix 15mm bore pillar tap long neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair complete all as specified and directed. |
| 71 | Supply and fix in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (concealed type) |
| 72 | Supply and fix in repairs Stop/Angle valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 73 | Supply and fix chromium plated shower rose with or without swivel joints 150mm dia including fixing to steel pipe, fixed as in repairs complete all as specified and directed. |
| 74 | Supply and fix 15mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for 15mm bore iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.28 kg as approved, fixed as in repairs complete all as specified and directed. |
| 75 | Supply and fix 20mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.45 kg as approved, fixed as in repairs complete all as specified and directed. |
| 76 | Supply and fix central hole Basin Mixer, WHB/Bathroom, Kitchen , without poupwaste system and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 77 | Supply and fix telephonic wall mixer with hand shower for Bathroom 2 in 1 without poupwaste system with 1.00 m long silver tube/pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 78 | Supply and fix in repairs brass chromium plated tubular towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified |
| 79 | Supply and fix fency type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in repair. Make: Jaquar, Hindware and other equivalent. |
| 80 | Supply and fix Fancy type elegant corner glass shelf of radius 300 mm with 300x600 mm size including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, complete all as specified and directed. |
| 81 | Supply and fix in repair, PVC bathroom mirror cabinet size 400x500mm, selected quality, single door, wall mounted plastic multi utility type, complete all as specified and directed. |
| 82 | Supply and fix of PVC waste down pipe of 40mm bore complete all as specified and as directed. |
| 83 | Supply and fix of PVC waste down pipe of 32mm bore (folding) complete all as specified and as directed. |
| 84 | Supply and fix PVC flexible pipe 32 mm(non-folding) suitable for WHB/ Sink/Urinals, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 85 | Supply and fix 15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs complete all as specified and directed. |
| 86 | Supply and fix 15mm dia PVC connection with PTMT nut, of length 750mm, fixed as in repairs complete all as specified and directed. |
| 87 | Supply and fix 600x450 mm bevelled edge mirror of selected glass mounted on 6mm tick AC building board or commercial plywood and fixed to wooden on plugs with chromium plated brass screws and cup wasgers complete all as specified. |
| 88 | Supply and fix Viterious china toilet paper holder colour, in repair, complete all as specified and as directed |
| 89 | Supply and fix Grating square 100 mm size (openable) of Stainless steel (Minimum weight 100gms) complete all as specified and as directed |
| 90 | Supply and fix Grating square 150 mm size (openable) of PTMT (Minimum weight 100gms) complete all as specified and as directed |
| 91 | Supply and fix PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing complete all as specified & directed. |
| 92 | Supply and fix in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 15mm bore iron pipe. |
| 93 | Supply and fix in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 20mm bore iron pipe |
| 94 | Supply and fix stainless steel plate rack, made out of 1.00mm thick sheet of size 24\\"x36\\"x10\\" deep, ISI marked, fixed as in repairs complete all as specified and directed. |
| 95 | Supply and fix in repair, mild steel chromium plated Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 96 | Supply and fix Urinal spreader any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) as in fixed in repair |
| 97 | Supply and fix in repair Vitreous China urinals, Half stall type (back or corner wall type) of size 420x395x635mm of white with incl CP brass coupling, PVC flexible discharge pipe including chromium plated water spreader, connection pipe and discharge down pipe, complete all as directed |
| 98 | Supply and fix Vitreous china urinal partition white of size 310x700 mm slabs terminating about 40cm above floor line complete all as specified and as directed |
| 99 | Supply and fix in repairs vitreous china wash down water closet (pedestal pattern) , of colour snow white, of size 570x460x380mm and including plastic seat cover of same colour, pressure jet spray etc. complete all as specified and as directed |
| 100 | Supply and fix wash hand basin, vitreous china, white, decorative type, flat or angle back, size 550mm x 400mm incliding cutting for and pinning in ends of brackets or erecting stand, incl CP waste coupling but exclusive of pillar tap and waste pipe, fixed as in repairs complete all as specified. |
| 101 | Supply and fix Vitreous china squatting pan, \\"Orissa pattern\\" of size 580 x 440 mm white with integral foot rests,including cast iron P or S trap with provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan, flushing cistern, flush pipe, PVC connection for water supply to flushing cistern etc complete fixed in repair. |
| 102 | Material & Labour for sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repairs complete all as specified and directed. |
| 103 | Dismantling of water tanks exc 250 ltrs capacity but not exc 500 ltr capicity and removal at site |
| 104 | Supply and fix Rotational moulded PVC, Triple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple(inlet & outlet) etc. but excluding connection of ball valve, over drain pipe complete all as specified and directed. |
| 105 | Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site |
| 106 | Supply and fix Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with inlet & outlet connections with 15/20mm ball valve & including all fittings such as GI tank nipple 150 mm long with washer & plug etc, complete all as specified and directed. |
| 107 | Supply & fixing PVC cover for water tank capacity exc. 250 litres but n. exc. 500 litres, Threaded or flap type including fixing new MS hinges and staples made for purpose, fixed as in repairs complete all as specified and directed. |
| 108 | Same as item No 106.00 above, but capacity exc 500 ltrs but n.exc 1000 Ltr all as specified. |
| 109 | Taking up or down 15 mm dia steel tubing and connection and removal at site directed by Engr-In Charge. |
| 110 | Taking up or down 20 mm dia steel tubing and connection and removal at site directed by Engr-In Charge. |
| 111 | Supply and fixing 15mm bore tubes \\"medium grade\\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified & directed. |
| 112 | Supply and fixing 20mm bore tubes \\"medium grade\\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as spd & directed. |
| 113 | Refixing old 15mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed. |
| 114 | Refixing old 20mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed. |
| 115 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, walls etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed |
| 116 | Material and labour for water proofing treatment of sunken floor of WCs, bathroom etc. by applying of the following specifications :- Note: For above item Std Specification process for Sunken Treatment (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. and remove all loose/unsound material, dirt, dust, etc.(ii) Applying cement slurry mixed with acrylic based polymer modified cementitious composite compound coating Hydroproof Xtra of FOSROC/Equivalent of Dr Fixit of Pidilite Industries Ltd in the ratio of 1:2:4 (One part of acrylic polymer : Two part of water and four part of cement).(iii) First layer of cement slurry @ 0.444 Kg/Sqm mixed with acrylic based modified cementious composite compound @ 0.222 Litre/Sqm and allow it to air dry for 04 hours.(iv) Second layer of cement slurry @ 0.222 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.111 Litre/Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours.(v) 200 micron thick polythene film shall be pasted with help of adhesives over treatment and apply over APP membrane groove out to wall upto 5'' to 6''.(vi) 15mm thick rendering CM 1:3 with WPC to vertical walls of Sunken portion Area. Note :- Joints of WC/Trap/Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work. |
| 117 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed. |
| 118 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 119 | Material & Labour for first quality joint free Non Skid glazed ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) complete all as specified and directed by Engr-In- Charge. |
| 120 | Material & Labour for 1st quality, joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4, complete all as specified and directed by Engr-In- Charge. |
| 121 | Supply and fix 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including camps as required as in repair, complete all as specified and directed. |
| 122 | Supply and fix 110mm dia PVC (SWR) junction double, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified. |
| 123 | Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified and as directed |
| 124 | Supply and fix 110mm dia PVC (SWR) reducer, single, equal or unequal of any length including jointing with solvant cement as required complete all as specified. |
| 125 | Supply and fix 75mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified. |
| 126 | Supply and fix 75mm dia PVC (SWR) junction double, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified. |
| 127 | Supply and fix 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified. |
| 128 | Supply and fix 75mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified. |
| 129 | Supply and fix 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified. |
| 130 | Supply and fix 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including camps as required as in repair, complete all as specified and directed. |
| 131 | Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed. |
| 132 | Material & Labour brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified & directed. |
| 133 | Same as item No 131.00 above but except bricks all as specified. |
| 134 | Material & Labour for Rendering 15mm thick on fair faces of newly brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content) (External surface), complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately. |
| 135 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc in any position complete all as specified and directed. |
| 136 | Material & Labour for Rendering 15mm thick on fair faces of old brick work or concrete surfaces incl cornices, chajjas, sun shades etc. in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content) (External surface), complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately. |
| 137 | Supply only Integral waterproofing compound all as specified as per manufacture instruction complete all as specified and directed by Engr-In- Charge. |
| 138 | Material & Labour for preparation of new plastered or unplastered surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint, complete all as specified. |
| 139 | Material & Labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement (Internal surfaces), complete all as specified and directed by Engr-In- Charge. |
| 140 | Material & Labour for for applying 3 mm thick (achieved in two coats) wall care putty of new undecorated plastered surfaces of wall complete all as specified and directed |
| 141 | Material & Labour for preparatin of new / previously untreated surface & applying two coats of oil bound distemper (OBD) on wall surfaces over a coat of primer complete all as specified and directed by Engr-In- Charge. |
| 142 | Material & Labour for Rendering 5mm thick on ceiling surface in CM 1:3 finished even and smooth complete all as specified and directed by Engr-In- Charge. |
| 143 | Material & Labour for preparation of plastered or unplastered new decorated surfaces of ceiling etc.applying three coat of white lime wash complete all as specified and directed by Engr-In- Charge. |
| 144 | Demolition of reinforced cement concrete of any description in any position as in chajja/shelves, RCC Tank, kitchen chimney etc., including removal taken to any lead of rubbish outside MoD land, complete all as specified. |
| 145 | Material & Labour for RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in shelves / slabs and like with and incl use and waste of necessary form work complete all as specified. |
| 146 | Material & Labour for MS TMT Bars 10mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 147 | Demolition of stone slabs and PCC tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed |
| 148 | Material & Labour for machine cut Granite slab 15 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achieve the desired granite finish all as spfd. |
| 149 | Material & Labour for Rounding to edges of stone slabs any thick as in in steps, jambs, pillars, cokking plateforms and likes complete all as specified |
| 150 | Material & Labour for Screed bed or beding layer of morter 20mm thick in cement morter 1:4 for laying floor finishes to receiving the kota stone complete all as specified and directed. |
| 151 | Material & Labour for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with gray cement slurry mixed eith pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 152 | Demolition of cement concrete in ground floors and pavings n exc 15cm thick ( below or above GL) complete all as specified and directed. |
| 153 | Material & Labour for 50mm thick plain cement concrete C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement complete all as spd & directed. Note:- The plinth protection shall be laid in pannels. |
| 154 | Material & Labour for cement concrete type D2 1:5:10 ( using 40mm graded aggregate) as in foundations, filling and mass concrete. |
| 155 | Supply and fix for repair to roof lekage by using 100mm wide STP flash strip complete all as specified and directed by Engr-In- Charge. |
| 156 | Supply and fix for roof sheet lekage by using Acrylic Silicone Sealant tube applying at Joints/ flashings/ over screws etc of existing sheets, complete all as specified and directed by Engr-In- Charge. Note: Payments shall be made per Sealant Tube. |
| 157 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed |
| 158 | Material & Labour for Holes for nails or screws, hand punched through iron or mild steel (0.63 to 1.60mm thickness) complete all as specified and as directed |
| 159 | Preparation of old surfaces of walls including complete removal by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of colour wash, complete all as specified and directed by Engineer –in-Charge. |
| 160 | Material & Labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying two coat of white lime wash complete all as specified. |
| 161 | All as per above Srl item No 159.00 here-in –before but one coat of lime wash on ceiling, |
| 162 | Material & Labour for preparation of plastered or unplastered old decorated surfaces of walls incl cornices, chajjas, sun shades etc. and applying one coat of cement base paint with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) including sand paper or iron patti / flat complete all as specified. |
| 163 | Material & Labour for preparation of plastered or unplastered old decorated surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) complete all as specified. |
| 164 | Material & Labour for preparation of old decorated plastered surfaces of walls/ceiling by rubbing down, washing & stopping of distempered surfaces using necessary filling compound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying one coat of oil bound distemper, complete all as specified and directed by Engineer-in-charge. |
| 165 | Material & Labour for complete removal of existing treatment from internal surfaces on walls/ceiling by wire brushes, sand paper and iron patti / flat & stopping of surfaces & leveling/ edging the disturbed places/edges and applying compound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying two coats of oil bound distemper over a coat of alkali-resistant primer, complete all as specified and directed by the Engineer-in-Charge. |
| 166 | Material & labour for preparation of old painted wood or wood based surfaces (doors/windows/wooden ceiling/timber scantling etc) of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed. |
| 167 | Material & labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed. |
| 168 | Material & Labour for preparation of plastered or unplastered old decorated surfaces with sand papering of walls/floors incl cornices etc. incl washing, rubbing down and stoping the connected previously treated surfaces and applying one coat of acrylic emulsion exterior quality (Apex painting or terracota acrylic) (tint as approved by GE) complete all as specified. |
| 169 | Material & labour for preparation of old brick & concrete surfaces as in floors of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed. |
| 170 | Material & Labour including preparing old roof covering steel surfaces (Plain/ corrugated roof sheets) of any type of treatment surfaces incl washing and cleaning etc. to steel and iron surfaces and applying one coats of synthetic enamel roof paint, complete all as specified. |
| 171 | Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge. |
| 172 | Material & Labour for point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing sunken boxes for mounting of switch, socket all as specified and directed for the following :- |
| 173 | One light/fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. |
| 174 | One bell/buzzer point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. |
| 175 | One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed. |
| 176 | One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed. |
| 177 | One two way point controlled by two, two way switches 05 / 06 Amps complete all as specified and directed. |
| 178 | All as per serial item No 171.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed. |
| 179 | Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :- |
| 180 | One light / fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. |
| 181 | One bell/buzzer point controlled by one, one way switch 05/06 Amps complete all as specified and directed. |
| 182 | One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed. |
| 183 | One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed. |
| 184 | One two way point controlled by two, two way switches 05 / 06 Amps complete all as specified and directed. |
| 185 | All as per serial item No 173.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed. |
| 186 | Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge. |
| 187 | Supply & fixing socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed by Engr-in-Charge. |
| 188 | Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge. |
| 189 | Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge. |
| 190 | Supply and fixing bell push flush type , 5 amps , 240 volts all as directed by Engr-in-Charge |
| 191 | Supply and fixing buzzer/door bell ding dong type , 240 volts AC all as directed by Engr-in-Charge. |
| 192 | Supply & fixing switch piano flush type, 05/06 Amps single pole, two way 240 volts complete all as specified & directed. by Engr-in-Charge |
| 193 | Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge. |
| 194 | Supply and fix LED ADORE 9 W B22 CDL 3 STAR LAMP, colour temp 6500K, complete all as specified and directed by Engr-in-Charge. |
| 195 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 196 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. |
| 197 | Supply and fix LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed by Engr-in-Charge. |
| 198 | Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge. |
| 199 | Supply and fixing LED bldg security/street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed by Engineer -in- Charge. |
| 200 | Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed by Engineer - in - Charge. |
| 201 | Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit/casing capping of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed by Engineer - in - Charge. |
| 202 | Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge. |
| 203 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge. |
| 204 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge. |
| 205 | Supply and fixing MCB, SP, AC, 240 volts \\"C\\" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed by Engr - in - Charge. |
| 206 | Supply and fix in repair MCB single pole & neutral 32 Amps 240 volts, C series,10 kA rupturing capacity complete all as specified and as directed |
| 207 | Supply & fixing MCB, DP (Double Pole), AC, 240 volts, C series capacity 20 Amps to 32 Amps 10kA and making connections complete all as specified & directed by Engr - in - Charge. |
| 208 | Supply & fixing MCB, DP (Double Pole), AC, 240 volts, C series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed by Engr - in - Charge. |
| 209 | Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision of four pole 100 Amp isolator and MCBs of cap 20 to 40 Amps as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge. |
| 210 | Supply & fix Isolator 4 Pole 'C' series 100 amps capacity AC 415 V,10kA complete all as specified and directed by Engineer - in - Charge. |
| 211 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed by Engr - in - Charge. |
| 212 | Taking down carefully service connection cable of any size and making good to disturbed surface as per existing complete all as specified and directed by Engr - in - Charge. |
| 213 | Supply and fix 1100 volts grade heavy duty cable 6sqmm 2 core PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed by Engr - in - Charge. |
| 214 | Supply and fix 1100 volts grade heavy duty cable 16sqmm 2 core PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed by Engr - in - Charge. |
| 215 | Supply and fixing in repair/replacement to existing surface light any type with 15 watt 220 volts AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed by Engineer -in- Charge. |
| 216 | Supply and fixing in repair/replacement to existing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified & directed by Engineer -in- Charge. |
| 217 | Supply and fix steel meter box of size 90x95x20 cm box with thickness of steel 2mm including double door for opening with lockable arrangement incl steel knob, hinges, plater for hanging of meter 02 Nos and DBs 03 Nos etc with 4mm thick plain glass (size 6\\"x6\\") for provn of meter reading complete all as specified and directed by Engineer-in-Charge. |
| 218 | Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH including taking down unserviceable and depositing to E/M Store complete all as specified and directed by Engineer-in-Charge. |
| 219 | Amount of credit of Rs. 177367.50 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender