Tender For Provision Of Dvr Trg Track For annual maintenance contract Centre And College Lucknow
Tender Overview
Project Description
Tender for Provision Of Dvr Trg Track For annual maintenance contract Centre And College Lucknow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Oct-2026 | Critical date amendment2 | Date | 04-Nov-2026 |
| 2 | 19-Sep-2026 | Critical date amendment | Date | 21-Oct-2026 |
| 3 | 26-Oct-2026 | Critical date amendment3 | Date | 23-Nov-2026 |
| 4 | 16-Nov-2026 | Critical date amendment4 | Date | 04-Dec-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | SITE ClEARANCESurface dressing /cutting of vegetation/bushed/shrubs of any type n exc. 15 cm deep in soft/loose soil and getting out including removal as required Complete all as specified and directed. |
| 2 | M & L for forming hump/embankment including raising (or lowering) earth, spreading in layers n. exc. 30cm thick, watering, ramming/rolling and finishing to required size, shape etc not exceeding 1.50m high from base complete all as specified and directed. |
| 3 | Grubbing up tree trunk including cutting trunk portion protruding over ground, digging out roots, girth of tree exc 30cm and n.exc 100cm, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc 50 m and clearing site complete all as specified and directed. |
| 4 | Grubbing up tree trunk including cutting trunk portion protruding over ground, digging out roots, girth of tree exc 100cm and n.exc 150cm, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc 50 m and clearing site complete all as specified and directed. |
| 5 | SANITRY BLOCKExcavating in trenches not exc 1.5m wide and exc 1.5 m in depth but n exc 3.0m deep, for foundations, laying of pipes & cable etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 6 | M&L for Reinforced cement concrete (Design Mix) M-25 using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc; basement slabs under-reamed pillars and mass concrete etc. complete all as specified and di-rected.(Note: Steel reinforcement shall be measured & paid separately) |
| 7 | M&L for Reinforced cement concrete (Design Mix) M-25 using 20 mm graded crushed stone aggregate as in col-umn, pillars, piers, post and struts etc. complete all as specified and directed.(Note: Steel reinforcement shall be measured & paid separately) |
| 8 | M&L for Reinforced cement concrete (Design Mix) M-25 using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels etc. complete all as specified and directed.(Note: Steel reinforcement shall be measured & paid separately) |
| 9 | M&L for Reinforced cement concrete (Design Mix) M-25 using 20 mm grad-ed crushed stone aggregate as in slab supported on walls and the like complete all as specified and directed.(Note: Steel reinforcement shall be measured & paid separately). |
| 10 | M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. |
| 11 | M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed. |
| 12 | M&L for form work to faces of sides and soffits of floor or roof beams, cantilevers, shelves includ-ing supports, overhangs, lintels etc for rough finished flat surfaces of concrete complete all as specified and directed. |
| 13 | M&L for TMT bar 5mm dia and over upto and including 10 mm dia cut to length as in stirupps, bent to shape as required including cranking,bending .hooking end and binding with steel wire annealed not less than 0.9mm or securing with dips complete all as specified and directed. |
| 14 | M&L for 10 to 12 mm thick smart care ready mix rendering/plaster with high quality polymer adhesive and well graded sand and fillers which can be used for plastering (as per manufacturer instruction) over all internal surfaces of walls above skirting/dado complete all as specified and directed. |
| 15 | M&L for 10 to 12 mm thick smart care ready mix repair rendering/plaster with high quality polymer adhesive and well graded sand and fillers which can be used for plastering (as per manufacturer instruction) mixed with and including liquid water proofing compound of approved quality as per manufacturers instructions, with smooth & fair finish complete all as specified and directed. |
| 16 | M&L 5 mm thick smart care ready mix rendering/plaster with high quality polymer adhesive and well graded sand and fillers which can be used for plastering (as per manufacturer instruction) with smooth finish on soffits, side of RCC beam, bottom of slab, chajja , porch etc. complete all as specified and directed.” |
| 17 | Material & labour for preparation of old plastered/new surfaces of finished walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine with Mechanical meansThe work for periodical services shall include the following and the rates quoted by the bidder shall include the same.(a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorized applicator through manufacturer of the materials like Exterior emulsion paint, putty etc. after approval by the GE. |
| 18 | M & L for preparation of new/old plastered surfaces of wall and applying two coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified & directed. |
| 19 | M&L for 18 to 20 mm thick machine cut kota stone slab flooring over and including 20mm thick screed bedding in cement mortar 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.Note:- The size of kota stone slab shall be not less than 550mmx550mm cut size except the location where the balance portion remain less than size as specified above |
| 20 | M&L for glazed ceramic joint free coloured tiles in vertical surfaces of size 600mmx 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.. |
| 21 | M&L for 7 to 8 mm thick Non skid ceramic joint free coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 22 | M&L for 25 mm thick PCC type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in leveling /sub base of flooring complete all as specified and directed. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm uprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, complete all as specified and directed.Note :-For WPC frames, minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on plus side shall be accepted but no extra payment on this account shall be made. |
| 24 | Supply and fixing 30 mm thick factory made wire mesh solid WPC prelim door shutter with lamination consisting of Density 650 Kg/Cum manufactured by an ISO -9001-2015 certified company, door to be paneled with SS mosquito mesh and XPM aluminium mesh for additional strength and safety purpose (confirming as per IS:4020). The door should be water proof termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. MS powder coated butt hinges size 100mm x25mmx2 mm and 32 mm long steel screws drilled suitable to pass through both the walls of the MS tube. Other hardware’s should be fixed with 19x6mm size stainless steel screw and 2 mm thick edge moulding tape or 90 degree edge bend finish etc complete as per direction of Engineer-In- Charge, manufacturers specification & drawings complete all as specified & directed .Note:-The work for WPC shutter shall include the following and the rates quoted by the bidder shall include the same- |
| 25 | S&F factory made steel windows single shutter with tubular frame of size 40mmx79mm with Z section side hung glazed shutter fixed (with shash bar) on external side and including steel handle 100mm long of mild steel flat 20mmx5mm made to shpe 02 nos of MS tower bolts 100mm on each shutter and fixing hooks and eye of std quality as approved complete all as specified and directed. |
| 26 | M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide primer complete all as specified and directed. |
| 27 | M&L for 4 mm thick plain sheet glass ordinary quality including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 28 | S & F Stainless steel Butt hinges \\"medium weight\\" steel 100mm size complete all as specified and directed. |
| 29 | S & F 200mm long Stainless steel matte finish ,barrel tower bolts of extruded section complete all as specified and directed. |
| 30 | S & F 150mm long Stainless steel matte finish ,barrel tower bolts of extruded section complete all as specified and directed. |
| 31 | S & F Stainless Steel handle matte finish fabricated type 150mm long complete all as specified and directed. |
| 32 | S&F 250 mm Stainless steel ,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 33 | S & F Stainless steel Butt hinges \\"medium weight\\" steel 125mm size complete all as specified and directed. |
| 34 | S&F two(double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed. Please Enable Macros to View BoQ information |
| 35 | S&F two(double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayCorrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender